Makita MP001G Bedienungsanleitung

EN INSTRUCTION MANUAL 4

FR MANUEL D’INSTRUCTIONS 12

DE BETRIEBSANLEITUNG 21

IT ISTRUZIONI PER L’USO 31

NL 41

ES MANUAL DE INSTRUCCIONES 51

PT MANUAL DE INSTRUÇÕES 61

DA BRUGSANVISNING 70

EL 78

TR 88

SV 96

NO 104

FI 112

LV 120

LT 129

ET 137

PL 145

HU 155

NÁVOD NA OBSLUHU 164

CS 173

SL NAVODILA ZA UPORABO 181

SQ MANUALI I PËRDORIMIT 189

BG 198

HR 208

216

SR 226

RO 235

244

RU 254

264

274

FA 288

AR 295

MP001G

4 ENGLISH

SPECIFICATIONS

Model: MP001G

Overall length with BL4025 320 mm

with BL4040 336 mm

Maximum air pressure 1,100 kPa

Duty cycle

Rated voltage D.C. 36 V - 40 V max

Net weight 2.8 - 3.1 kg

without notice.

Battery cartridge BL4020 / BL4025 / BL4040 / BL4050F

Charger

residence.

WARNING:

for the equipment. Be sure that you understand their

Read instruction manual.

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

on the environment and human health.

Do not dispose of electrical and electronic

waste!

on waste electrical and electronic equip-

as well as their adaptation to national law,

and delivered to a separate collection point

for municipal waste, operating in accor-

dance with the regulations on environmen-

tal protection.

equipment.

NOTE:

another.

NOTE:

exposure.

5 ENGLISH

WARNING:

WARNING: -

NOTE:

measured in accordance with a standard test method

NOTE:

WARNING:

WARNING: -

For European countries only

to this instruction manual.

WARNING: -

Failure to follow all instructions

The term “power tool” in the warnings refers to your

1. Cluttered or

dark areas invite accidents.

2. -

Power tools create sparks

which may ignite the dust or fumes.

Distractions can cause

you to lose control.

reduce risk of electric shock.

There is an increased risk of elec-

3. -

Water entering a power tool will increase

the risk of electric shock.

Damaged or entangled cords

increase the risk of electric shock.

Use of

electric shock.

Use of an RCD reduces

the risk of electric shock.

However, users of pacemakers and other similar

medical devices should contact the maker of their

this power tool.

Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

6 ENGLISH

Carrying power tools with

that have the switch on invites accidents.

attached to a rotating part of the power tool may

of the power tool in unexpected situations.

Use of

dust collection can reduce dust-related hazards.

second.

The correct

rate for which it was designed.

Such preventive safety measures reduce

the risk of starting the power tool accidentally.

4. -

Power tools are dangerous in the

hands of untrained users.

power tools.

6. Properly

maintained cutting tools with sharp cutting edges

Use of the power tool

result in a hazardous situation.

Slippery

handles and grasping surfaces do not allow for

safe handling and control of the tool in unexpected

situations.

The entangle-

ment of cloth work gloves in the moving parts may

2. -

5. -

7 ENGLISH

Charging improperly or at temperatures

This will ensure that the safety of the power

tool is maintained.

2. Service

manufacturer or authorized service providers.

3. -

2. -

Otherwise, the tool or

4. -

Using the tool at output

pressure greater than the maximum output pres-

Otherwise, the tool or

The tool may

Use the pressure gauge of the tool

only as a reference.

9. -

Otherwise,

10.

and cause a malfunction.

11.

12.

13. If you

14.

The metal

your skin.

15.

16. The

18.

19. Your

20.

21.

22.

The use of any other accessories

persons.

23.

Damaged

24.

1. -

or explosion.

6. -

8 ENGLISH

Such conduct may result in a

10.

forwarding agents, special requirement on pack-

ing an expert for hazardous material is required.

national regulations.

around in the packaging.

11.

12.

sive heat, explosion, or leak of electrolyte.

13.

14.

15. -

16.

It may result in poor performance or

It may result in a malfunction

18.

CAUTION:

also void the Makita warranty for the Makita tool and

charger.

2. -

3. -

FUNCTIONAL

DESCRIPTION

CAUTION:

CAUTION: -

Red indicator Button Battery cartridge

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator as

CAUTION:

If not,

you or someone around you.

CAUTION:

If the cartridge does not slide in easily, it is

9 ENGLISH

light up for a few seconds.

Indicator lamps

Charge the

may have

malfunctioned.

NOTE: Depending on the conditions of use and the

from the actual capacity.

NOTE:

Then turn the tool on to restart.

is displayed on the pressure gauge. In this situation,

Then, turn the tool on again.

WARNING:

CAUTION:

Otherwise, pulling the switch

Main power switch

To turn on the tool, press the main power switch. To turn

NOTE:

To avoid unintentional start up, the main power switch

will automatically shut down when the switch trigger

is not pulled for a certain period after the main power

switch is turned on.

WARNING: -

WARNING:

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

Switch trigger

1 Overheat warning icon

Current pressure value

8 Target pressure value

9 Pressure value unit

pressure gauge when you turn on the tool. If nothing is

connected to the tool, the pressure gauge displays “0”.

The pressure gauge also displays the target pressure

the same as the last time.

progress indicator comes to the right end.

10 ENGLISH

The pressure value unit is changed each time you press

ton. To decrease the target pressure value, press the [-]

You can select one of the three modes as follows.

Mode

Ball 35 to 110 kPa

Low speed

speed

35 to 1,100 kPa

High speed

high speed

NOTE:

NOTE: Be sure to select the low speed mode when

formed properly.

pressing the main power switch, the lamp goes out.

Lamp Main power switch

CAUTION:

NOTICE:

NOTE:

the lamp. Be careful not to scratch the lens of lamp, or

it may lower the illumination.

Presta valve adapter

Tapered adapter

Hose holder Hose

NOTICE:

OPERATION

NOTE: The standard adapters vary depending on the

country.

NOTICE:

Valve stem

Turn on the tool.

checking the status of the tire.

NOTICE:

Valve stem

Turn on the tool, and then set the pressure value

appropriate for the tire using the pressure gauge.

Andere Handbücher für MP001G

Inhaltsverzeichnis

Andere Makita Elektrowerkzeuge Handbücher

Makita

Makita BST220 Bedienungsanleitung

Makita

Makita DHR182 Bedienungsanleitung

Makita

Makita TM3010C Bedienungsanleitung

Makita

Makita DTW181RGJ Bedienungsanleitung

Makita

Makita TM3000C Bedienungsanleitung

Makita

Makita HR2630 Bedienungsanleitung

Makita

Makita EX2650LHM Bedienungsanleitung

Makita

Makita HR001G Bedienungsanleitung

Makita

Makita DTM41 Handbuch

Makita

Makita 4326 Bedienungsanleitung

Makita

Makita JV0600 Bedienungsanleitung

Makita

Makita TW161D Bedienungsanleitung

Makita

Makita DTW284 Bedienungsanleitung

Makita

Makita DHR280 Bedienungsanleitung

Makita

Makita TM3000C Bedienungsanleitung

Makita

Makita DTW1001ZJ Bedienungsanleitung

Makita

Makita DWT310 Bedienungsanleitung

Makita

Makita HR008G Bedienungsanleitung

Makita

Makita KP0810CJ Bedienungsanleitung

Makita

Makita SG1251J Bedienungsanleitung

Makita

Makita STRAIGHT SHEAR JS1660 Bedienungsanleitung

Makita

Makita KP0810 Bedienungsanleitung

Makita

Makita DHR281 Bedienungsanleitung

Makita

Makita JR3060T Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch

Silca

Silca MARKER 2000 Bedienungsanleitung