Makita LC1230 Handbuch

Continuous Rating (W)

Voltage (V) Current (A) Cycle (Hz)

1. No tools are required for adjustment of the angle of the fence.

Angle adjustment of the fence can be made by loosening the lever.

2. With Quick vise

3. Aluminium base

4. Dust tray can be dismounted from the machine.

5. Chip saw blade 305mm

6. Carrying handle

7. Shaft Lock

8. Anti-Vibration for chip saw, for decrease the noise during the work,

and it contributes to saving of the life of saw blade.

Input Output Max. Output(W)

115 15.0 50/60 1650 950 2000

220 8.4 50/60 1750 1000 2700

230 8.0 50/60 1750 1000 2700

240 7.7 50/60 1750 1000 2700

No Load Speed 1300rpm

305mm(12")

25.4mm(1")

150x75mm(5-7/8"x2-15/16")

100x100mm(3-15/16"x3-15/16")

ø115mm(4-1/2")

85x85mm(3-5/16"x3-5/16")

ø90mm(3-1/2")

Max. cutting capacities

Blade diameter

Arbor diameter

Net weight 19kg(41.9 lbs)

Power supply cord 2.5m(8.2 ft)

Socket Wrench 17---------------------------------- 1 pc.

Safety Goggle--------------------------------------- 1 pc.

Switch Button(as s spare) ------------------------ 1 pc.

T. C. T. Saw Blade(for U.S. A. and Canada)--- 1 pc.

LC1230

Models No.

New Tool

Description Portable Cut Off 305mm

TECHNICAL INFORMATION

CONCEPTION AND MAIN APPLICATIONS

Specifications

Standard equipment

T. C. T. Saw Blade(for thinner mild steel)

T. C. T. Saw Blade(for mild steel(noiseless steel))

T. C. T. Saw Blade(for stainless steel)

Optional accessories

603(23-3/4")

516(20-1/4")

306(12")

1.Double insulated

2.See the attached sheets for more information.

Superiority of chip saw blade over abrasive cut off wheel

1.Faster than abrasive cut off wheel in cutting work.

2.Fine cutting section, and saving the time for after-treatment.

Available also for cutting plastic pipe without burningof cutting section.

3.Lower frequency of blade change.

Consequency the chip saw brings you the saving for working time.

4.Few spark springs.

5.No smell of the burning materials painted on the tools, like as abrasive cut off wheels.

6.Few chips springs from the materials.

Consequently the chip saws brings you clean working plase.

7.Much more tough than abrasive cut off wheels, which shows as per the following diagram.

Feature and benefits

T.C.T Saw Blade

.Diameter : 305mm(12")

Grip for carrying

Aluminum base

Shaft lock

Blade sready rest

.Less noise

. Longer life of blade

*Model LC1230 for European market is equipt with safety lock system.

Cutting angle adjustment

without any tools

.Fence angle can be adjust

only by loosening the lever.

.Lenght of the lever is changeable

and it can be stored in the machine,

when it is not needed.

Dust tray

.Dismountable dust tray for

throwing away the dust.

Quick vise

.Various size of work

can be clamped quickly.

Makita

Model No. LC1230

Input(w) 1,750

No load speed(rpm)

85x85mm

(3-5/16"x3-5/16")

ø90mm

(3-1/2")

No tools are required Tools are required

1,300

Blade diameter 305mm(12")x25.4mm(1")

Max. cutting

capacities

Adjustment of the fence

angle

Quick vise

150x75mm

(5-7/8"x2-15/16")

100x100mm

(3-15/16"x3/15/16")

ø115mm

(4-1/2")

Shaft lock

Double insulation

Net weight

Net weight ----- without power supply cord and blade

Greasing

The movable parts and the ones contacting with the movableparts have to be greased before mounting.



Dismounting of blade case, and gear housing R

Chip saw blade and safety cover have to be taken away.

1. Down the motor unit (motor hausing and blade case) to the base, and lock it with the chain on the

hanger of handle.

2. Dismount the link plate after taking off the pan head screw M6.

3. Dismount the blade case, and then gear housing R.

Mounting of blade case and gear housing R

Carry out the above process in the inverse order. Blade case

Link plate

Pan head screw M6

Yes

19.0kg

(41.9lbs) 17.0kg

(37.5lbs)

Comparision

Repair

Note

LC1210

Dismounting of gear

1. Take off 2 ball bearings 6000 from the gear housing R.

2. Take off gear complete 16-44 from the gear housing R. However the ball bearing 6000LLB

remains in the gear housing R.

3. Put the gear housing R on the U-cut part of arbor press table, and press the spindle with the

arbor press. Then the spindle and ball bearing 6202LLB can be dismounted from the gear housing R.

4. Take off the ball bearing 6000LLB from the gear housingR.

Mounting of gear

Carry out the above process in the inverse order

Spindle

Helical gear 38

Tortion spring

Center plate

Tapping screw

Center cover

Center support

Center washer

Boss of sefety cover

Hex. socket

head bolt M4

Ball bearing 6000

Ball bearing 6202LLB

Ball bearing

6000LLB

Gear housing R

Arbor press

table

Mounting of safety cover

1. Insert the hex socket head M4 into the hole on the safety cover and mount the torsion spring on the

place illustrated below.

2. Mount the center plate adjusting its holes with hex socket head bolt M4 and the boss on the

safety cover.

3. Fasten center washer, center cover and center support on the place illustrated below, with

tapping screw.

Mounting of compression spring

1. Mount end of the compression spring in the

gear housing L after standing the gear housing L

as illustrated left.

2. Mount the another end of compression spring

on the spring holder. In this process the stamp

on the spring holder has to come on the upper side

in view of operating position.

3. Mount the spring holder on the position A greased

with MAKITA Grease No.1, pressing the compression

spring.

Gear housing L

Compression spring

Hex bolt M16

Hex nut M16-24

Base

Stamp

Spring holder

Position A

Greease

Adjust of base and gear housing L

1. Adjust with the hex nut M16-24 for smooth moving of

motor unit (motor housing and blade case) without

swinging to left and right.

2. Mount the gear housing L on the base, greasing the

contact place with MAKITA Grease No.1

Dismounting of handle and switch unit

Handle set is fastened on the gear housing L with 6 screws sa follows.

-with 3 screws, Handle R and L

-with another 3 screws, Handle set and Gear Housing L

1. Dismount the handle L, bay taking off these 6 screws. Construction of the switch unit is as illustrated below.

2. Dismount the motor housing. (The handle R can not be dismounted without taking off the motor housing.

And please refer to the following "Dismounting of motor unit")

3. Dismount the handle R.

Dismounting of motor unit

1. Take off 2 carbon brushes.

2. Take off the 4 screws on the motor housing and 3 screwson the handle.

3. The motor housing with handle can be dismounted from the gear housing L.

4. Armature can be dismounted from the motor housing.

Mounting of vise

1. In view of operator, vise nut has to be mounted in thefollowing conditions.

-The head, left seide.

-The thin part, below.

2. Mount the pin 16 in the groove part of guide plate.

3. Install one of the chain ring between the screw guide and the base as illustrated below.

4. Fasten the screw guide on the base with the screws.

4 screws on the motor housing

3 screws, Handle R and L

Handle L

Lock off botton

Lock off lever

Switch

Hunger

Switch lever

The thin part

The head pin 16

guide plate

screw guide

Vice nut screw M8

chain

Mounting of lever rod 10

1. Install rubber pin 4 on the lever holder as for as it will go.

2. Fastening torque for hex nut M10-17 must be 450kgfcm with torque wrench 1R223,

ratchet head 1R224 and 17mm1. Adjust box wrench.

3. Install the lever rod 10 in the area illustrated below.

Adjusting for LC1230 with safety lock system

1. Adjust with hex bolt M6x16 so that the lock lever can return to the lock point from

the every working position smoothly.

2. Fastening torque for hex socket head bolt must be 80kgfcm.

holder for

rubber pin 4

lever holder

lever rod

hex socket head bolt

stopper plate

lock plate

rod 12

lock lever

hex socket head bolt

compession spring

Switch Line filter

Suport Unit

Noise

Suppessor

Power

supply

cord

In some areas,noise suppressor and line filter are not used.

Fix power supply cord as below.

190-210mm

strain relief power supply cord

Hold the two lead wires of Line Filter and

Put Line Filter on the position indicated below

Line Filter

To Support To Switch

Hold the two lead wires of Line Filter

Line Filter

the position of Line Filter

Andere Handbücher für LC1230

Inhaltsverzeichnis

Andere Makita Gesehen Handbücher

Makita

Makita BCS550 Kurzanleitung

Makita

Makita 5377MG Kurzanleitung

Makita

Makita LS1040 Bedienungsanleitung

Makita

Makita GPS01 Bedienungsanleitung

Makita

Makita DLS713RTE Bedienungsanleitung

Makita

Makita LH1040 Bedienungsanleitung

Makita

Makita JR140D Bedienungsanleitung

Makita

Makita LS002G Bedienungsanleitung

Makita

Makita LS1214FL Bedienungsanleitung

Makita

Makita JRl40DWA Bedienungsanleitung

Makita

Makita M5802 Handbuch

Makita

Makita 4200NH Kurzanleitung

Makita

Makita JR3030T Bedienungsanleitung

Makita

Makita DLS110 Bedienungsanleitung

Makita

Makita LW1400 Bedienungsanleitung

Makita

Makita BJR181 Bedienungsanleitung

Makita

Makita 5007NB-A Kurzanleitung

Makita

Makita LS1214LB Bedienungsanleitung

Makita

Makita JR3020 Bedienungsanleitung

Makita

Makita LS800D Bedienungsanleitung

Makita

Makita JR3000 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Makita

Makita LS004G Bedienungsanleitung

Makita

Makita LS1013F Kurzanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung

Parkside

Parkside PTS 500 A1 Bedienungsanleitung

Cosen

Cosen SH-250R Bedienungsanleitung

Dremel

Dremel MS20 Montageanleitung