Makita LS711D Handbuch

TECHNICAL INFORMATION

Models

Description

New Tool

CONCEPTION AND MAIN APPLICATIONS

LS711D

190mm (7-1/2") Cordless Slide Compound Saw

LS0711D is the 18V Cordless version of LS0711

(190mm Cordless slide compound saw) developed for works

at the site far from A/C supplies, taking after the benefits of LS0711.

Vertical vise 1

Lock-off button(spare) 2

Dust bag 1

Chip saw blade190 1

Holder metal fittings 2

Box wrench 10 1

Set square(triangle) 1

Holder assembly

Horizontal vise

Set plate

Holder fitting set (for long stock)

Chip saw blade(various types)

Battery 1822(Ni-Cd,18V,2.0Ah)

Battery 1833(Ni-MH,18V,2.0Ah)

Fast charger DC1801

50mm(2")X182mm(7-1/8")

50mm(2")X127mm(5")

35mm(1-3/8")X182mm(7-1/8")

35mm(1-3/8")X127mm(5")

550mm (21-5/8")

at 90°/45°

at 45°/45°

454mm (17-7/8")

Motor

Battery

No load speed

Blade diameter

Arbor diameter

Net weight

DC 18V magnet motor

Battery 1822(Ni-Cd,18V,2.0Ah)

2000rpm(electric brake)

180mm(7-1/8")-190mm(7-1/2")

15.88mm(5/8")

North America

Other Countries 20.0mm(13/16")

10.5Kg(23.1lbs)

Max. cutting capacities

at 90°/90°

at 45°/90°

Angle

turn base/blade Max. size of stock

454mm (17-7/8")

Specifications

Standard equipment

Optoinal accessories

Sales Points

18V cordless machine

Powerful enough to

cut interior stocks

Operative without hand pinched.

Position to which Blade descends can be

regulated on the way and it is convenient

for grooving works.

As the scale is put in front,

easier to see

Inclinable 0

~45 to left side

Bevel scale easy to see

Linear ball bearings are applied

for two ball each and sliding is

smooth.

Cushions are put on both ends

of sliding so that the noise may

be reduced when sliding part

and the body are hitting with

each other.

Sliding mechanism

Life-long DC motor with

replaceable carbon brushes

*Interchangeable with Model 5621D

With electric brake

Positive stop angles: Left/Right

0, 15,22.5, 30, 45

Positive clicking stop of Turn base

As scale color is different from the

background color and the scales are big,

it is very easy to see.

Angle scales easy to see

With larger contact face of base,

steady cutting available.

Base

Horizontal vice (optional)

can be attached.

Holder fitting attacheable

to left/right sides

Notch depth adjusting mechanism

Good design shape for gripping.

Gearing handle easy for carrying

Inclined lever easy to operate Angle cut

Left; up to 47

~Right; up to 57

(1)GREASE APPLICATION

Capacity

Working volume per full-chaged battery with tipped saw bladeof standard accessory

Stocks

Angle

Blade:right 38mm x 89mm

(2 x 4)

Crown moldings 6"

Number of stocks to cut

approx. 50pcs.

approx. 90pcs.

Repair

*"Number of stocks to cut" differs by conditions of battery and application.

Apply Makita grease on the following rotating/sliding surfaces before assembling.

Up/Down shaking fulcrum of Blade case: Blade case, Arm, Pipe16-90

Arm rotation part: Arm, Arm holder complete, ScrewM10

L/R rotating support and sliding parts of Turn base: Turnbase,

Boss in the center of base, Slide plate, Tip of Grip32

Rotating and Open/Close parts of Safety cover: Center plate,Spiral spring 26,Tip of Link plate

(2)ASSEMBLY/DISASSEMBLY OF BLADE CASE( Motor part in the body)

[Disassembly]

Remove Blade , Safety cover, and Dust nozzle before disassembling.

1) Lower fully Blade case (Motor part in the body), and push Stopper pin in.

2) Remove Hex. socket head bolt M6 fixing Link plate , and loosen Hex. socket head bolt M6x10 fixing Pipe 16-90.

3) Gripping Blade case (Motor part in the body) with hand, pull Stopper pin and raise the body slowly. Where Torsion

spring 28 does not work, pull Pipe 16-90 and take off Blade case from Arm.

[Assembly]

Reverse procedure of disassembly.

Stopper pin Hex. socket head screw M6x10 Hex.socket head bolt M6

Blade case

Pipe 16-90

Take off

Link plate

Turn base:0°

Turn base:35.3°to left

Blade:30°

(3)ASSEMBLY OF SAFETY COVER

1) Insert Spiral spring 26 into the oval hole in Safety cover , making spring's tip meet the hole.

2) Making Center washer meet four bosses in Safety cover , and attach it. (See Fig.1)

3) By putting the tip of Spiral spring 26 into Center cover hole, attach Center cover as shown in Fig. 2.

4) Attach Center plate, making it meet four bosses in Safety cover, and tighten it with Pan head screw M5.

Oval hole in Safety cover Spiral spring 26 Flat washer 5

Pan head screw M5

Spiral spring 26 Center cover hole

Center washer

Center plate

Center cover

Safety cover

Fig. 1 Fig. 2

(4)ASSEMBLY OF SQUARE ROD COMPLETE AND RING 26

1) Passing Ring 26 through Slide pipe 25-235 as in the figure, attach Arm-holder complete to Turn base complete.

2) Slide Arm-holder complete until the groove on the top ofSlide pipe 25-235 comes to the center of Turn base,

and then attach Square rod complete.

3) Attach Thumb nut 6x33 and H.socket bolt to meet the holeof Turn base and that of Ring26.

(5)ASSEMBLY/DISASSEMBLY OF TURN BASE AND BASE

1) When detaching/ attaching Turn base from/to Base, push Lock lever first.

2) Adjust the torque of Hex. lock nut M8 in the center of Turn base so that Turn base may turn smoothly without trembling.

Thumb nut 6x33

Hex. lock nut M8 Turn base

Base

Lock lever

Arm-holder complete

Ring 26

Turn base complete

Square rod complete

Rubber pin

Slide pipe 25-235

H.socket bolt

(6)ASSEMBLY/DISASSEMBLY OF POSITIVE LOCK UNIT ON TURN BASE

[Disassembly]

1) Remove Tapping screw bind CT4x12, and take off Lock plate.

2) Remove Lock lever , and pull Pin 3 out.

3) Remove Lock pin from Turn base.( Compression spring 6 also comes off simultaneously)

[Assembly]

Reverse procedure of disassembly order.

(7)ASSEMBLY OF ARM

1) Adjust torque of Hex. lock nut M10 so that Arm may slidesmoothly without trembling.

2) Attach Lever 100 that fixes Arm so that it is placed in the position as in the figure when Arm is fixed.

(8)ADJUSTMENT OF THE STRENGTH OF TORSION SPRING 28

Adjust the strength of Torsion spring 28 by tightening/loosening Hex. socket head bolt M6x10

so that the cutting head may return to the top dead center smoothly from any position.

Turn base

Lock plate

Tapping screw bind CT4x12

Lock pin

Pin 3

Lever 100

Arm

Hex. socket head bolt M6x10 Torsion spring 28

Hex. lock nut M10

Compression spring 6

Lock lever

approx.45°

Switch

White Red

Insulated

connector

Black Black

Black

Terminal(+)

Terminal(-)

Brush holer

Battery holder

Circuit diagram

Andere Handbücher für LS711D

Inhaltsverzeichnis

Andere Makita Gesehen Handbücher

Makita

Makita LC1230 Bedienungsanleitung

Makita

Makita LS004G Bedienungsanleitung

Makita

Makita LS1016 Bedienungsanleitung

Makita

Makita HS7601 Handbuch

Makita

Makita 2414NB Bedienungsanleitung

Makita

Makita PB002G Bedienungsanleitung

Makita

Makita DLS110 Bedienungsanleitung

Makita

Makita LH1040 Handbuch

Makita

Makita LS1045 Bedienungsanleitung

Makita

Makita 2107F Bedienungsanleitung

Makita

Makita JR3051T Bedienungsanleitung

Makita

Makita N5900B Bedienungsanleitung

Makita

Makita JR3061T Bedienungsanleitung

Makita

Makita N5900B Bedienungsanleitung

Makita

Makita LS1045 Bedienungsanleitung

Makita

Makita 5008MG Bedienungsanleitung

Makita

Makita HS7000 Bedienungsanleitung

Makita

Makita LS1040FN Bedienungsanleitung

Makita

Makita 5740NB Bedienungsanleitung

Makita

Makita DJR143 Bedienungsanleitung

Makita

Makita LS1216 Bedienungsanleitung

Makita

Makita N5900B Bedienungsanleitung

Makita

Makita DUC150 Bedienungsanleitung

Makita

Makita 5704R Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung

Parkside

Parkside PTS 500 A1 Bedienungsanleitung

Cosen

Cosen SH-250R Bedienungsanleitung

Dremel

Dremel MS20 Montageanleitung