Makita ML123 Handbuch

Continuous Rating (W)

Voltage (V) Cycle (Hz) Input Output Max. Output(W)

110

ML123

115

120

220

230

240

Models No.

Description

NEW TOOL

Current (A)

TECHNICAL INFORMATION

CONCEPTION AND MAIN APPLICATIONS

Specification

Standard equipment

Optional accessories

< Note > The standard equipment for the tool shown may differ from country to country.

P 1 / 5

Rechargeable Job Site Light

This product has been developed as a sister model of ML122.

It is different from ML122 in the following points.

* Retractable hook instead of strap with hook

* Built in type reflector instead of removable one

The continuous illumination time is 230 minutes (almost 4 hours),

if the full charged Ni-MH battery of 3.0Ah is attached

to this product.

L-1

L-2

Dimensions : mm ( " )

Width ( W )

Height ( H )

Length ( L-1 )

Length ( L-2 ) 411 (16-1/4)

350 (13-3/4)

94 (3-11/16)

97 (13-13/16)

Battery voltage ( V )

Battery capacity (Ah)

*Continuous illumination time: approx.min.

**Illumination (lx)

Net weight w/o battery :Kg (lbs )

12 9.6

2.03.0

150230 150230

2.03.0

330 280

0.37 (0.82)

< Note > * Continuous illumination time: The figures shown in the above list can differ from condition to condition

of batteries or room temperature.

**Illumination (lx) : The figures shown in the above list were measured on the following conditions.

* With attaching reflector to the product

* Measured at the point of 50 cm distant from light source

* Set plate ........................... 1 pc.

* Hook ................................ 1 pc.

* Chargers ; DC1411, DC1801, DC9710, DC9711, DC1470, DC1201

DC1422, DC9700, DC1290

* Ni-Cd / 12V Batteries ; 1222, 1202, 1202A, 1200, 1200A, 1220

* Ni-Cd / 9.6V Batteries ; 9122, 9102, 9102A, 9100, 9120

* Ni-MH / 12V Batteries ; 1233, 1234, 1235, 1235A, 1200A, 1220

* Ni-MH / 9.6V Batteries ; 9133, 9134, 9135, 9135A,

< Note > The battery's size is not included

in the above dimensions.

Comparison of products

Features and benefits P 2 / 5

Absorber to protect

body from shock

Clear lamp head cover.

A beam through this cover

floodlights narrow space.

Reflector placed

inside lamp cover

does not disturb

your work.

Two supporting blocks

for stationary application

Retractable hook for

easy storage.

Fits the outline of lamp

cover perfectly.

Also removable.

Accepts both 12V and 9.6V batteries.

With set plate (comes with this

product), all Makita cluster type

9.6V and 12V batteries are available.

* Continuous illumination time: The figures shown in the above list can differ from condition to condition

of batteries or room temperature.

< Note >

** Illumination (lx) : The figures shown in the above list were measured at the point of

50 cm (19-3/4") distant from light source

Model No.

Specifications

Voltage ( V )

*Continuous illumination

time: approx.min.

**Illumination (lx)

Fluorescent

tube

Type of tube

*** Service life : h

Starter

Dimensions : mm ( " )

w/o battery Length w/o hook

Length w. hook

Width

Height

Net weight w/o battery :Kg (lbs )

Weight w/ battery 1222 :Kg (lbs )

Weight w/ battery 9122 :Kg (lbs )

12V/ 2.0Ah

9.6V/ 2.0Ah

12V

9.6V

ML123

MAKITA

ML701

9.6 / 12

150 120

(with battery 7.2V 1.3Ah)

150

330

280

Compact fluorescent tube 13W x 2

2,600 1,000

No No

350 (13-3/4)

411 (16-1/4)

94 (3-11/16)

97 (3-13/16)

210 (8-1/4)

91 (3-5/8)

44 (1-3/4)

0.37 (0.82) 0.23 (0.51)

0.57 (1.26) w/ battery 7000

7.2

Fluorescent tube 4W x 1

1.02 (2.25)

0.92 (2.03)

100

(with battery 7.2V 1.3Ah)

Color temperature : K 4,100 4,200

*** Service life : The figures shown in the above list are based on the aggregate sum of illumination time

in repeating "ON" for 19 minutes and "OFF" for 1 minute

Repair P 3 / 5

< 1 > Replacing battery holder, switch and circuit complete

(1) Connecting lead wires

The lead wires have to be connected as illustrated in Fig. 1. And then, solder them.

Fig. 1 Fig. 1A

Correct connection Wrong connection

Battery holder

Fluorescent

tube holder

(A)

(A) Connecting circuit complete's lead wire with battery holder

(B) (C) Connecting circuit complete's lead wire with switch

(C)

(B)

Solder here.

Lead wire (black) covered with

yellow tube

Yellow tube

Lead wire (red) covered with

yellow tube

Switch

Lead wire (black) covered with

yellow tube

Lead wire (black) covered with

yellow tube

Yellow tube

Circuit complete side

Circuit complete

Switch

Repair P 4 / 5

(D-1)Removing circuit complete's lead wire from fluorescent tube holder

Insert small screwdriver deep into rib 1 and 2 and pull out the lead wires pressing

with the screwdriver in the direction of the arrow as illustrated in Fig. 2A.

(D-2)Connecting circuit complete's lead wire with fluorescent tube holder

Insert receptacles into the holes of fluorescent tube holder with facing the receptacles' spikes to the outside

as illustrated in Fig. 3.

Lead wires (red) Tube installing side

View from tube installing side

Rib 1

Rib 2

Fluorescent tube holder

Fig. 2A

Fig. 2

Lead wire (black) covered

with yellow tube

Lead wire (red) covered

with yellow tube

The receptacles' spikes have to be

faced to out side.

Circuit complete

Fluorescent tube holder

< Note > The spikes of pulled (used) receptacles are deformed as illustrated in Fig. 3A.

The used ones have to be corrected as illustrated in Fig. 3B.

Fig. 3A Fig. 3B

Deformed spike Corrected spike

Fig. 3

Small

screwdriver

Small

screwdriver

Circuit diagram

Wiring diagram

P 5 / 5

Terminal +

Terminal

Battery holder Circuit

complete Fluorescent tube

Switch

Battery holder

Fluorescent

tube holder Circuit complete

Place lead wire, so that it can not be pinched

by housing, circuit complete and fluorescent tube holder.

Place lead wire, so that it can not be pinched

by housing, circuit complete and battery holder.

Andere Handbücher für ML123

Andere Makita Arbeitsleuchte Handbücher

Makita

Makita DML805 Bedienungsanleitung

Makita

Makita DML805 Bedienungsanleitung

Makita

Makita DML811 Bedienungsanleitung

Makita

Makita DML813 Bedienungsanleitung

Makita

Makita ML005G Bedienungsanleitung

Makita

Makita DEADML810 Bedienungsanleitung

Makita

Makita DML810 Bedienungsanleitung

Makita

Makita DML809 Bedienungsanleitung

Makita

Makita ML005G Bedienungsanleitung

Makita

Makita ML010G Bedienungsanleitung

Makita

Makita DML810/2 Bedienungsanleitung

Makita

Makita ML003G Bedienungsanleitung

Makita

Makita ML143 Kurzanleitung

Makita

Makita ML183 Kurzanleitung

Makita

Makita DML809 Bedienungsanleitung

Makita

Makita ML005G Bedienungsanleitung

Makita

Makita ML003G Bedienungsanleitung

Makita

Makita ML122 Bedienungsanleitung

Makita

Makita ML009G Bedienungsanleitung

Makita

Makita ML005G Bedienungsanleitung

Makita

Makita ML009G Bedienungsanleitung

Makita

Makita ML003G Bedienungsanleitung

Makita

Makita DML805 Bedienungsanleitung

Makita

Makita DML811 Bedienungsanleitung

Beliebte Arbeitsleuchte Handbücher anderer Marken

ANSMANN

ANSMANN POWERLIGHT 5.1 Bedienungsanleitung

RTRMAX

RTRMAX RTX1868 Bedienungsanleitung

FeinTech

FeinTech LAL00220 Bedienungsanleitung

Bunker Hill Security

Bunker Hill Security 64735 Bedienungsanleitung

Goobay

Goobay 30450 Bedienungsanleitung

REV Ritter

REV Ritter SPOT Bedienungsanleitung

Ignition

Ignition Stagepix Line 100 IP Bedienungsanleitung

SCANGRIP

SCANGRIP DUO CONNECT Bedienungsanleitung

Bosch

Bosch GLI 18 V Bedienungsanleitung

Bayco

Bayco SL-1514 Bedienungsanleitung

EUFAB

EUFAB SMD LED 8+1 Bedienungsanleitung

DeWalt

DeWalt DCL510 Bedienungsanleitung

PowerSmith

PowerSmith PWLD080T Bedienungsanleitung

MaxLite

MaxLite 73683 Bedienungsanleitung

Heitronic

Heitronic Trend 27867 Bedienungsanleitung

Monzana

Monzana Gore MZCL10 Bedienungsanleitung

EINHELL

EINHELL TE-CL 18/2000 LiAC Bedienungsanleitung

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Bedienungsanleitung