MAKS PIR Gebrauchsanweisung
ISM wireless interface, up to 2000 m 868.0... 868.6 MHz
secure two-way communication
key - 256 bits
Power
(Lithium battery included)
CR123A 3V battery
power consumption in standby
no more than 10 µA
transmission power consumption
no more than 20 mA
service life of battery
up to 5 years
Radiated electromagnetic field immunity
5 V/m
For more information on setting up and operating the
device, please visit www.maks.systems
Our digital passive infrared radio channel detector is equipped with a
PIR-sensor and designed for the security of any closed residential and
industrial premises.
When the thermal balance of the environment changes, the detector sends
an intrusion signal to the MAKS PRO alarm system center.
For indoor installation.
Radio communication
The detector transceiver operates in several channels of
868.0 ... 868.6 MHz band for redundancy.
Secure two-way radio communication.
Distance - up to 2000 m in the open space.
Three grades of power, maximum - up to 20 mW.
WIRELESS MOTION SENSOR INSENSITIVE TO ANIMALS
• sensitive PIR sensor
• equipped with a lens that is insensitive to animals
• adjustable sensitivity of the smartphone response
• secure two-way radio communication with MAKS PRO
• 868,0 ... 868.6MHz, several channels for redundancy,
range - up to 2000 m
• CR123 battery
• up to 5 years of operation on one battery
• easy and convenient installation
Characteristics
Case color
white, black
with a wall bracket
90 x 60 x 34.35 mm
Weight
130 grams
Operating temperature range
-10°C to +55°C
Detector dimensions
with an angle bracket
90 x 60 x 48.84 mm
Maximum working range
12 m
Setting
The sensor operates only with MAKS PRO wireless security system center,
connection to other systems is not provided.
The sensor is connected to the security center and is configured using the
MAKS SETUP mobile application.
Insensitive to animals
The detector has the special lens and is designed for use in areas where
pets (cats, dogs, etc.) can be present.
The device is insensitive to the movement of animals weighing up to 20 kg.
Optical noise immunity
not less than 6500 Lux
Electrostatic discharge resistance
8 kV
90 x 60 x 41.6 mm
Functional parts of the device
WWW.MAKS.SYSTEMS
1. Detector case
2. Light indicator of the
operation modes
3. PIR element lens
4. Bracket for detector
mounting
5. Tamper contact
6. Case back cover
7. Power button
Selecting the installation
location
Carefully select the installation location
of the MAKS PIR detector, taking into
account the direction of the lens and
the presence of obstacles that may
limit the view of the detector.
When installing the detector, make
sure that the area of intrusion detection
is within the maximum coverage of the
detector and the possible direction
of intruder’s movement is perpendicular
to the installation axis.
For the maximum coverage,
place the detector at a
height of 2.1 meters
from floor level.
Installation and connection
1. Mount the bracket 4using the supplied screws and wall plugs.
2. Place the device on bracket 4and slide it down to fix it and lock the
tamper contact 5. Flashes on indicator 2will confirm that the tamper is
locked
Registration and setup
1. Place the detector at a distance of no more than 2 m from the MAKS
PRO security center. Registration is run at a minimal possible power to
avoid the influence of neighboring systems that can be being configured
nearby.
2. Start the MAKS SETUP application
3. Follow the application instructions to connect to the MAKS PRO and
start the registration of MAKS wireless devices
4. Turn on the MAKS PIR, after 10-20 seconds it will be registered
5. Set up a new device in your mobile application
Switching on and off
Press button 7to switch on the device - the light indicator will be on. If the
device is registered in MAKS PRO, it switches to standby mode. If the device
has not been registered, it will go into sleep mode after 30 seconds.
To turn off the device, press and hold button 7 for 5 seconds.
4
2
7
Before installing the MAKS PIR, register it in the MAKS PRO and test the
detector signal strength using the MAKS SETUP application.
The detector is supplied with two brackets to place the device on a flat
surface or in a corner of the roomя.
We recommend to install the device in the following order:
1. Selecting the installation location with the best signal
2. Mounting the bracket
3. Detector Installation
Detector Installation
3
6
57
The device should not be placed:
1. Outdoors or in areas with unacceptable humidity and temperature
2. In places with a high level of radio interference
3. Near objects that can cause radio signal attenuation or shielding (metal,
mirror, etc.)
4. In a place where the lens is exposed to the direct sunlight.
5. In front of objects with quickly changing temperature or in places with
fast air circulation.
6. Facing any moving objects with human body temperature
7. At a distance of less than 1 m from the security center
Battery Replacement
1. Remove the device from the bracket by pushing it upwards.
2. Unscrew and remove the case back cover 6
3. Replace the battery and reassemble the device
1
Indication in communication test mode
Excellent connection - LED indicator flashes green
Satisfactory connection - LED indicator flashes yellow
Poor connection - LED indicator flashes red
No connection - LED indicator flashes red quickly
In test mode, the unit's radio transmitter operates at medium power.
0 m
5
m
10
m
15
m
5
m
10
m
15
m
95⁰
2.1 m
2.1 m 4.8 m 8.6 m 15 m
up to 20 kg
Andere MAKS Sicherheitssensor Handbücher
