Malloca MF-246EBI Technisches Handbuch

operation instruction
Please read this instruction carefully before use
Our company reserves the right to explain the instructions
The appearance of the product is subject to the actual product
Product technology or software upgrade without prior notice
MF-246EBI
Vui lòng đọc kỹ hướng dẫn trước khi sử dụng
Công ty chúng tôi giải thích các hướng dẫn
Sản phẩm phụ thuộc vào sản phẩm thực tế
Công nghệ sản phẩm hoặc nâng cấp phần mềm mà không cần thông báo trước
hướng dẫn sử dụng

Important Safety Caution
First Use of Product
Instruction Manual
Attentions before installation
Parts list for installation
Product and cabinet dimensions
Preparation before installation
Steps to put the refrigerator inside cabinet
Steps to install the cabinet door
Instruction to adjust cabinet door
Major Function Introduction
Steps for first use of product
Name for refrigerator components
Control panel
Power switch
Temperature adjustment in fresh compartment
Temperature adjustment in frozen compartment
Fast freeze function
Fast cooling function
Holiday mode function
Fridge compartment refrigeration power off function
Open door alarm function
Instruction and attentions for usage of refrigerator compartment
Suggested storage area for various foods
Usage of crisper box
Usage of bottle rack
Attentions for food storage in refrigerator compartment
Instruction and attentions for usage of freezer compartment
Attentions for food storage in refrigerator compartment
Attentions for food storage in freezer compartment
Daily maintenance for refrigerator
Clean refrigerator
Transportation of refrigerator
Abandon refrigerator
Table of contents

Dear customer:
Thanks for choosing our products. In order to guarantee the proper
usage of refrigerator and avoid personal injury, please carefully read
the contents with below symbols in this manual:
Electricity
Power
alternating current of this refrigerator is220V/50H,if voltage fluctuate too large(exceed
the range of 187-242V), the refrigerator may not start to work, The thermostat
compressor will burns out and compressor may sound abnormally,at this time, it must
be equipped with an automatic voltage stabilizer of more than 750W
Grounding
Power cord and plug
The refrigerator has to be powered with a special independent socket and reliably
grounded.
Please do not pull out the plug with jerk. Hold the power plug tightly, then pull
it out from socket directly. Make sure the power cord is not squeezed by the
refrigerator or user. Please be cautious to avoid damaging the power cord when
moving refrigerator away from the wall.
Do not use the damaged power cord or worn power plug. Please ask the
authorized service personals to replace the damaged power cord.
Please disconnect the refrigerator with power supply before cleaning, maintenance
and replacing LED light.
Leakage of flammable gas
In case of leakage of flammable gas, please open the doors and windows, do not
plug or unplug the power plug.
Important safety instructions
Warning
Attention
Mistaken operation may
result in personal injury
Mistaken operation may
result in personal injury
Strictly forbidden behavior
or operation
Behavior or operation that
must be observed

Usage
Food storage
Usage environment
This is household refrigerator which can only be used for food storage, please do
not store blood, medicine or biological in refrigerator. The flammable and explosive
dangerous products, highly corrosive acid or alkali shall not be stored in refrigerator.
When the refrigerator is running, do not touch the freezing surface in freezer
compartment with wet hands to avoid the skin adhered to the freezing surface.
Do not put bottled beer or drink inside the freezer compartment to avoid frost crack.
The refrigerator should be built-in the cabinet, please refer to the “Installation
instruction” for the specifications of cabinet.
The refrigerator shall be placed away from heat source and avoid direct sunshine
to guarantee the performance.
Do not expose the refrigerator to freezing environment, outdoors or rain.
Do not place the refrigerator in moisture, if the refrigerator is splashed with
water, wipe the water out immediately in order to avoid rusting or damage of
electrical insulation performance.
Do not place the heavy or container filled with water on top of refrigerator in order
to avoid the personal injury or leakage of electricity caused by falling of the heavy
or container.
Do not place or use electrical appliances such as power plug, stabilized voltage
supply, microwave on top of or inside refrigerator to avoid electromagnetic
interference.
Do not store or use gasoline or other flammable substances near to refrigerator to
avoid fire disaster.
Maintenance
Clean
Service
Do not use water to spray the refrigerator, make sure the refrigerator is not
placed in wet environment to avoid damage of electrical insulation performance.
When clean the refrigerator, please pull out the power plug. Make sure the
refrigerator is powered off for at least 5 minutes before connecting to power supply
again, or else the compressor may breakdown due to consecutive operation.
Do not use water to spray the refrigerator, make sure the refrigerator is not
placed in wet environment to avoid damage of electrical insulation performance.
The refrigerator can only be disassembled or repaired by qualified serviceman.
Danger: Risk of child entrapment. Before you throw away your old refrigerator
or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.

Tips: After changing the temperature setting, it will take some time before the cabinet temperature reach
balance.The length of time depends on ambient temperature,frequency of opening refrigerator doors and
the food storedin refrigerator.
First use of product
Preparations before using refrigerator
Remove all packaging materials including the foaming base and the adhesive
tapes to fix the accessories.
Please check the parts inside package according to packing list. If there is
difference, please consult the seller.
Check the accessories and materials
Place the refrigerator in proper position.
Please clean the refrigerator before use(refer to the chapter “clean of
refrigerator” on page 22)
After the refrigerator is leveled and cleaned, please wait 2 hours before
connecting to the power supply.
Please remove the protection film before use to guarantee the heat
dissipation of refrigerator.
Remove the protection film
Steps for first use of product
Connect to
power supply
After first connecting to
power supply, it will take
several hours for refrigerator
to complete the refrigeration.
The default preset
temperature is:
refrigerator compartment(5℃)
freezer compartment( -18℃)
Put the food
inside refrigerator
The food can be put into refrigerator
2-3 hours after connecting to power
supply.Please do not store too much
food in freezer compartment. The
total weight of the food stored in
each shelf should not be more
than 24kg.
Using
refrigerator
Keep the refrigerator running
for 24 hours to reach the
steady state after putting the
food inside refrigerator. After
that, the temperature can
be changed.

In order to make the refrigerator work well, please obey below installation steps.
Attentions before installation
Installation position
Please keep the refrigerator away from direct sunshine and heating appliances such as stove top,
over and dishwashers.
Power supply
Make sure the power plug can be easily pulled in and out when installing the refrigerator.
The power plug should be inserted into a special socket to avoid the unexpected power off of
refrigerator. Do not use extension cord or porous adapter.
To understand the requirement for power supply by referring to the nameplate in left side of
refrigerator.
The refrigerator should be correctly grounded.
Installation parts list
Installation instruction
1.front top plate 2.Hinge plate 3.Mounting plate
5.sealing strip
10.screw
(already installed)
Pcs Pcs Pcs Pcs
Pcs
Pcs
Pcs
10
Pcs
10
Pcs
6.Screw cap
Pcs
30
Pcs
2 Pcs
PcsPcs
7.Display small fixing plate 8.screw
9.screw 11.screw 12.bolt driver
B
A
CD

Basics size
cabinet size(mm) product size(mm)
Net empty width
Net empty depth
Net empty Height
Depth
Height
Width
upper
cabinet door
bottom
cabinet door
A:Edge dimension between the bottom door and cabinet body
H:Cabinet height
B:The distance between the lower and upper cabinet doors
The top plate front end of the cabinet is 10mm lower than the cabinet

Preparations before installing the refrigerator
1.Confirm the direction of opening the door
The refrigerator door is opened from left side.
If change to open door from right side,please
install the upper and lower hinge on left side
after reversing the hinges. The reversing
direction is shown as arrow in the diagram. I
nstall the hinge fixing plate, remove the small
fixing plate in left side, then install the small
fixing plate in right side after changing the
direction of opening the door.
Install the front top plate
Fix the front top plate in front top of
refrigerator with screws.
Hinge alignment indication Hinge fixation enlarge picture
Remove the left side fixed plate install the right mounting plate
front top plate
AA

The steps to put the refrigerator inside cabinet
Fix the side of hinges with 2 screws(one screw
to fix the first hinge, the other screw to fix the
fourth hinge), after installing the cabinet door ,
insert other screws into the screw holes on the
hinge,then tighten the screws.
Fix the lower bottom feet to cabinet with screws.
B
B
B
Pass the power cord through the hole on the back of the cabinet. If the power socket is inside cabinet, firstly
plug the power plug into socket then put the refrigerator inside cabinet
Move the refrigerator into cabinet, adjust the refrigerator position in fore-and-aft direction to ensure the front
of hinge fixing plate is leveled with cabinet.
CAUTION
Do not squeeze the power cord. A broken power cord may lead to fire disaster.

Loosen cap screws, then remove the mounting plate.
The cap screw
The cap screw
Mounting plate
DD
The steps to install the upper cabinet door
Measure the distance between upper mounting plate of refrigerator compartment door and top/left of
cabinet and record the position.
cabinetbody
Mounting plate
Inhaltsverzeichnis
Sprachen:
Andere Malloca Kühlschrank Handbücher
Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve
Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux
Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp
Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO
CORBERO CC2300MCW Bedienungsanleitung

KitchenAid
KitchenAid 2205264 Bedienungsanleitung

Stengel
Stengel KU 1101 A++ Bedienungsanleitung












