M&O Electronics MOOH-BE00BT Bedienungsanleitung
M&O ELECTRONICS
MOOH-BE00BT
M&O Electronics, Inc.
Made in China
www.mo-electronics.com
(+1) 888-65-MandO
2880 Zanker Road, Suite 203, San Jose, CA 95134, USA
USER MANUAL
R
R
Bluetooth
CPSIA COMPLIANT
RoHS
2011/65/EU
H
mercury-free
g
lead-
free
Pb
Warnings ........................................................................ 2
FCC and environmental protection compliance .............. 4
Instructions for product usage ......................................... 5
Product features ............................................................ 14
Product specifications ................................................... 15
Limited product warranty ............................................... 17
Beryllium
Acoustic
page 1
Warnings (Read before product usage)
Thank you for purchasing this Beryllium acoustic Bluetooth headphone.
Before you start using the product, you are strongly recommended to carefully read
these warnings and cautions described in this section. If you ignore these
warnings, you may suffer various kinds of risks including, but not limited to, abusing
or misusing this device, damaging this device, damaging other devices, causing
temporary or permanent ear and hearing damage, hurting people, local traffic violation,
and accidents after missing verbal warning signals. Also, you may lose the product
warranty issued under the condition of a proper use of this product, or
may even lose the authority to operate this product. To learn more about the M&O
Electronics, Inc. headphone important safety instructions, please visit
www.mo-electronics.com.
Do NOT expose the product to environment with temperature out of the range
of 41 ºF to 104 ºF.
Do NOT use the product Bluetooth transmission function while taking flight or
in other vehicles where the use of Bluetooth transmission signals may be
prohibited. In this situation, the users shall use the passive mode audio operation
without Bluetooth transmission. The passive mode audio operation also extends
headphone battery life, and shall support audio function when battery is completely
depleted or headphone system is turned off.
Please keep your package box, purchase receipt, and this product and its
accessories in a good condition in case that you may need them when you
are seeking for customer service.
Do not open the cabinet by yourself to avoid the risk of electrical shock
or product damage. Refer servicing to qualified personnel only. Also, any
changes or modifications not authorized in writing by M&O Electronics, Inc.
will void your authority to operate this product, and void your right of product
warranty issued under the condition of a proper use of this product.
Do NOT use the product while driving.
Do NOT expose the product to rain, liquids or high moisture environment.
Do NOT expose the product to unusual chemical substances.
Do NOT use the product in a hazardous area or location with safety warning
signs.
page 2
Do NOT put the product on the ear at an extremely high-volume level (> 70%
volume level) or at a high-volume level (> 50% volume level) for a long time to
avoid temporary or permanent hearing damage. You are always suggested to
turn the volume up slowly and gradually.
Do NOT put the product on the ear at a high-volume level (> 50% volume
level) while you are moving to avoid missing any verbal warnings signs other
people are trying to offer you.
This product contains magnetic material. Do NOT use it around devices or
people very sensitive to magnetic signal. This product is not intended for
working in close distance to any implantable medical devices.
Choking hazard: This product contains small parts not for children under 3 years
of age. Also, this product is not a toy or game, and not intended for children
12 years old and younger.
Do NOT use any unqualified or unfamiliar charging devices to charge this
product. Please use the included charging cable to connect this product to a
qualified USB 5V DC power supply working in a good condition.
Stop using this product if it emits any loud unexpected noise. Please verify
this encountered noise by turning on this product again in a quiet environment
without the existence of those signals in the Bluetooth frequency range (from
2402 MHz to 2480 MHz), for example a microwave oven. Then, carefully listen to
the audio signals. If the loud unexpected noise still exists, please pack this
product and contact M&O Electronics, Inc. for customer service.
This product must not be discarded as household waste; and shall be delivered
to an appropriate collection facility for recycling or disposed of following those
regulations about electronic waste in your local areas. DO NOT put it in the
garbage or curbside recycling bins. Bring it to the recycler. Plenty of nonprofit
organizations and local communities offer options to help you recycle old
electronics. Proper disposal and recycling helps protect natural resources,
human health, and the environment. For more information on disposal and
recycling of this product, contact your local municipality and disposal service.
page 3
FCC and environmental protection compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference; and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with both the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not authorized in writing
by M&O Electronics, Inc. will not only void your authority to operate this equipment,
but also void your right of product warranty issued under the condition of a proper
use of this product.
This device complies with FCC limits set forth for the general population. It must
not be colocated or be operating in conjunction with any other antenna or
transmitter. Also, this device is not a toy or game, and not intended for children 12
years old and younger.
CPSIA COMPLIANT
RoHS
2011/65/EU
H
mercury-free
g
lead-
free
Pb
FCC ID: 2ALHGOHBE00BT
page 4
Instructions for product usage
This product has been tested and found to comply with comprehensive
environmental protection regulations, standards or directives in the United States,
California in the United States, Canada, and Europe. Those environment protection
regulations, standards, and directives include:
California proposition 65;
ROHS (Restriction of Hazard Substances), also known as Directive 2011/65/EU;
REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals);
CPSIA (Consumer Product Safety Improvement Act);
We always work hard to provide the users with high quality products, and improve
the protection of human health and environment from the risks that can be posed by
chemicals.
lead-free; and
mercury-free.
Micro-USB Charging Cable
(5 V DC supply, ~ 31 " (0.8 m)) 1/2
Stereo Headphone Cable
(3.5 mm, ~ 47 4 " (1.2 m)) 1/
Headphone EVA Box
(Hardness 70 degrees)
M&O ELECTRONICS
MOOH-BE00BT
M&O ELECTRONICS, INC.
Made in China
www.mo-electronics.com
(+1) 888-65-MandO
2880 Zanker Road, Suite 203, San Jose, CA 95134, USA
USER MANUAL
Warnings ........................................................................ 2
FCC and environmental protection compliance .............. 4
Instructions for product usage ......................................... 5
Product features .............................................................14
Product specifications ................................................... 15
Limited product warranty ............................................... 17
page 1
User Manual
(Warnings, FCC and environment protection
compliance, Instructions for product usage,
Product features, Product specifications,
Limited Product Warranty)
Package contents
Bluetooth Headphone
(Beryllium Acoustic)
MODEL: MOOH-BE00BT
page 5
Product overview
Bluetooth Headphone
(Beryllium Acoustic)
MODEL: MOOH-BE00BT
12
3
4
5
12Micro-B charging port 3
Status indication light
4
Music play/pause
5
Stereo audio cable port Volume - / Fast reverse
Volume + / Fast forward
Buttons, indication lights and ports on the product
Two different modes to use this product
Three are two different modes to use this product, including: a) use this product in
regular Bluetooth transmission mode; and b) use this product in passive audio
operation mode.
MODE A) regular Bluetooth transmission mode
Bluetooth transmission mode is the default operation mode of this product and the
so-called system operation mode in this user manual. The Bluetooth transmission mode
operation is activated after pressing on the power button as described in this section.
However, if there is a stereo audio cable plugged in, the Bluetooth transmission
mode shall be switched off. Meanwhile, this product shall work in a passive audio
operation mode with which audio signals will be transferred over the audio cable. For more
details about the passive audio operation mode, please refer to MODE B) in the next section.
Pressing on the power button to activate
Bluetooth transmission mode
1
Bluetooth transmission mode is not available
until the audio cable is disconnected
Call answer/reject
Power on/off, pairing
6
6
page 6
Step a) Pressing on the power button for more than 3 seconds to turn on this product, four
series of short beep sounds shall present in a rising tone and the status indication light turns
blue to indicate the device’s turning on event. Another two series of beep sounds shall prompt
up after this product is turned on;
Bluetooth transmission mode can be activated without the involvement of Bluetooth
device pairing procedure if all the following four conditions are satisfied at the same
time.
Step b)This product shall send out connecting requests to an audio device it most recently
paired. The status indication light flashes blue once every two seconds to indicate that this
product detects the audio device, but the audio device has not accepted its requests yet;
Step c) After the audio device accepts this product’s connecting request, the Bluetooth
connection is set up and two series of beep sounds shall prompt up after this connecting.
Also, the status indication light flashes blue twice every five seconds to indicate a connected
Bluetooth transmission.
R
Bluetooth
R
Bluetooth ONBluetooth ON
MOOH-BE00BT
Connected
6
step a)
step b)
Connecting with Bluetooth device
step c)
Bluetooth connecting without pairing
a) this product has most recently paired with the Bluetooth audio device;
c) the audio device is working and ready for accepting a Bluetooth connecting
request; and
d) this product is in the Bluetooth work distance of the audio device.
A typical Bluetooth connecting in this situation is introduced in the following steps:
b) this product’s pairing name “MOOH-BE00BT” is listed in the audio device’s
Bluetooth system as a paired device;
Another typical Bluetooth connecting without pairing applies when this product is
already turned on but temporarily disconnected from the audio device by the users.
The status indication light shall flash blue once every two seconds to indicate that
this product detects the audio device, but the audio device has not accepted its
requests. In this case, the users do not need to power off and on this product again,
and shall resume the connection via the audio device’s Bluetooth device manager.
* This product is a feature of a 5-minute continuous no-Bluetooth-connecting time limit, beyond which this product will be
automatically turned off.
page 7
Bluetooth device pairing shall be required to activate the Bluetooth transmission mode
if the audio device to be connected has any one of the following characteristics:
Bluetooth connecting in need of Bluetooth pairing
a) a new device to this product;
b) a device removing this product from its paired device list;
c) a device not the one which most recently paired with this product.
Step a) Two different options to initiate the device pairing procedure:
#1 option) Pressing on the power button for less than 5 seconds then releasing the button.
Starting with four series of beep sounds and another two series of beep sounds next, this
product is powered on and sends out connecting requests to an audio device it paired to
most recently. However, because the audio device to be connected does not satisfy either one
of the aforementioned requirements about connecting without pairing, this product shall
automatically initiate a device pairing procedure.
#2 option) The users press on the power button for more than 5 seconds before releasing it.
In this situation, this product immediately starts a device pairing procedure. The users shall also
notice four series of beep sounds and another two series of beep sounds next to it.
During this product’s device pairing procedure, in the audio device’s Bluetooth device
manager system, check available Bluetooth devices. This product’s pairing name
1
“MOOH-BE00BT” shall be added into the list of those available devices to be connected in the
audio device Bluetooth device manager system as a response to this product’s pairing request.
Note 1) If this product is not added in the list, it may be in a priority order paired with another Bluetooth audio
device that it connected before. In this case, the users shall either release this product from another audio
device’s connecting device list, or bring this product out of the Bluetooth signal range (> 50 feet in-sight distance)
of another audio device, then turn off and on this product and repeat the device pairing procedure. Another kind of
cause may be related to the audio device, which shall be solved by restarting the audio device or refresh its
Bluetooth device manager system.
In the audio device’s Bluetooth device manager system, the users shall select this
product as “my device” or “the paired device” of the Bluetooth audio device, after which this
product is Bluetooth connected with the audio device and the Bluetooth transmission mode is
activated. The users shall notice two series of beep sounds and the status indication lights
flashes blue twice every five seconds to indicate a connected Bluetooth transmission.
A typical Bluetooth connecting in this situation is introduced in the following steps:
The device pairing procedure is identified by a visual signal that the status indication
light alternatively flashes blue and red.
Step b) Finding this product in the audio device’s Bluetooth available devices list:
Step c) Selecting this product as the audio device’s Bluetooth connected devices:
page 8
MODE B) passive audio operation mode
Passive audio operation mode is enabled by plugging an audio cable connector into
this product’s stereo audio cable port. Operating in this mode, this product acts like
a passive speaker with the listed characteristics. This mode ensures this product
recommended for audio operation in many special situations prohibiting Bluetooth
communication, for example airline traveling.
1
Bluetooth transmission mode shall be turned off via pressing on the power button
for more than 5 seconds. Then, four series of short beep sounds shall present in a
descending tone and the status indication light turns red before the system shuts down
itself and stops Bluetooth audio transmission.
Plugging into audio cable to enable
the passive audio operation mode
audio signals transferred over the audio cable;
most of electronic components stop operation. Neither verbal nor visual warning signal;
leakage current < 0.1 mA.
supporting audio functions when the battery is exhausted and/or when system shuts
down;
R
Bluetooth
R
6
step a) #2 option
step c)
Pairing and connecting with Bluetooth device
step a) #1 option
Bluetooth ONBluetooth ON
MOOH-BE00BT
Pairing
step b)
Bluetooth transmission mode is terminated and its resume requires unplugging of the audio
cable and powering on this product again;
page 9
page 10
Listening to music
VOL+
Press and release:
VOL
Press and release:
Press and hold:
(3sec<hold time, refer to the previous sections)
Play/Pause
Press and release:
Power on/off, Bluetooth pairing
Printed letter “R” or “L”
indicating the right or the
left unit
Put on this product and be aware of the
unit’s direction. The right unit fits the right
ear, and the left unit the left ear. The
unit direction shall be identified by printed
letter “R” or “L” on the unit.
A
Listening to music in the operating MODE A- Bluetooth transmission mode
(Profile: A2DP c1.2, AVRCP v1.4)
B
R
Bluetooth
Listening to music
1) power on this product and setup the Bluetooth connection following the instructions
in the previous sections;
2) use those specified buttons and instructions indicated below to implement various
music play functions. The second, abbreviated as “sec”, is the base unit of measuring
the button holding time.
3) the achievable music play functions may vary depending on the Bluetooth device
and/or its audio music player .
4) this product provides fifteen levels of volume for the users to select. When the volume
level is set to be the maximum one or the minimum one, a verbal beep warning signal
prompts up.
Do NOT put the product on the ear for listening audio signals at an extremely high-volume
level (> 70% volume level) or at a high-volume level (> 50% volume level) for a long time to
avoid temporary or permanent hearing damage. You are always suggested to turn the
volume up slowly and gradually.
Whenever a percent of volume level is mentioned in this manual, it is assumed that
the Bluetooth device audio volume is set to be the maximum one and the Bluetooth device
works properly.
5
3
4
Press and hold:
(2sec<hold time<4sec)
Press and hold:
(2sec<hold time<4sec)
Dial the phone number of last call
Short press and release twice:
Inhaltsverzeichnis
