MANGO POWER mPanel Pro Bedienungsanleitung
mPanel Pro User Manual
mPanel Pro User Manual
These instrucons apply to the MANGO POWER mPanel Pro device. Please read this
user manual carefully before installing or using the mPanel Pro device. Keep this user
manual in a safe place for future reference.
Contents
1. Safety Precauons .................................................................................................Page 2
2. Product Introducon ............................................................................................Page 3
2.1 Overview ...........................................................................................................Page 3
2.2 What's in the BOX ...........................................................................................Page 4
2.3 Product Specicaons ....................................................................................Page 5
2.4 Features .............................................................................................................Page 5
3. Product Installaon ...............................................................................................Page 8
3.1 Materials Required for Installaon ...............................................................Page 8
3.2 Product Fixaon ...............................................................................................Page 8
3.3 Wiring Steps ......................................................................................................Page 9
4. Funcon Usage Introducon ..............................................................................Page 12
4.1 Backup Mode ....................................................................................................Page 12
4.2 Grid Funcon ....................................................................................................Page 12
©2023 MANGO POWER. All rights reserved. MANGO POWER, the MANGO POWER logo, MANGO POWER Union, MANGO POWER E, MANGO POWER
mPanel Pro, and other trademarks or service names are the trademarks of MANGO POWER, inc. Date subject to change
2
1. Safety Precauons
Before installing, maintaining, or using the MANGO POWER mPanel Pro in any way, please read this
user manual carefully and comply with all the rules and warnings provided. Do not operate this
device contrary to the regulaons of this user manual as it may lead to equipment damage, electric
shock, severe injury, or even death.
The operator of this device must be procient in understanding the condion of the equipment, the
safety informaon provided, and the necessary precauons before any installaon, operaon,
inspecon, or maintenance.
This user manual categorizes safety precauons into two levels: "▲Danger" and "●Warning"
▲Danger: Flawed operang may be extremely dangerous and result in severe injury or death.
●Warning: Flawed operang may be dangerous and result in moderate or mild injuries and equipment
or property damage.
The pictures in this user manual are for reference only and may dier slightly from the actual product.
In order to ensure the connuous improvement of this manual, we reserve the right to modify it.
No unit or individual is permied to copy this user manual, or any part of it, for commercial purposes
without the wrien permission of the MANGO POWER company.
Danger:
When dealing with any wiring, please ensure that the power is turned o to avoid electric shock.
This equipment should not be installed in direct sunlight, humid environments, or in any
environment where rain or other liquids might make contact with it as this increases the risk of
electric shock.
Ensure reliable grounding to prevent electric shock and re.
All work related to the device must be performed by qualied personnel who have electrician
cercates – including installaon, operaon, maintenance, sengs, and conguraon.
Do not aempt to operate any of the switches or buons of the device with wet hands as it may
lead to electric shock.
Please switch the power o when troubleshoong or cleaning any of the equipment.
Do not place any objects on top of the product during installaon, use, or maintenance.
The electrical installaon must comply with the local naonal electrical safety standards and
regulaons.
Do not remove the rear boom plate of the device during circuit operaon as there is a risk of
electric shock.
Do not touch any uninsulated wires when opening the protecve cover on the product as there is
a risk of electric shock.
Do not place ammable or potenally explosive materials near the device.
©2023 MANGO POWER. All rights reserved. MANGO POWER, the MANGO POWER logo, MANGO POWER Union, MANGO POWER E, MANGO POWER
mPanel Pro, and other trademarks or service names are the trademarks of MANGO POWER, inc. Date subject to change
3
All warning labels and nameplates on mPanel Pro should be clearly visible at all mes and must
not be removed, covered, or pasted over.
Please keep children away from mPanel Pro and its related systems to prevent the risk of electric
shock.
Warnings:
For opmal use and maintenance, the space surrounding the device should not be less than
400mm and the device’s height o the ground should not be less than 1000mm.
Only aer the device is installed in its place should any electrical wiring be carried out.
Protecve sleeves must be added to the incoming and outgoing wires of the device.
Conrm that the circuit breaker and all incoming/outgoing wires meet the requirements of the
device during wiring.
Use special prescribed tools for the installaon and wiring of the device.
If any damage to the mechanical or electrical components of the device is noted, immediately
stop the installaon, and contact the supplier promptly.
If any malfuncon occurs during use, turn o the power and check the cause of the malfuncon.
Do not strike the device while trying to repair it as it will only damage the equipment.
Switch the power supply o when performing maintenance checks and cleaning.
Live maintenance must be performed by professionals with the required protecve measures.
Do not modify any crical components of the device as it may lead to property, personal, or
product harm..
Do not use damaged, broken, or worn wires and connectors. Protect the wires from physical
damage - such as compression, door closures, or being ed into knots or stepped on.
Do not place incoming and outgoing wires in areas where water or other liquids may come into
contact with them.
2. Product Introducon
2.1 Overview
This product is an electrical control distribuon box designed for MANGO POWER Union and
MANGO POWER E products. The mPanel Pro connects the MANGO POWER Union or MANGO
POWER E to the load to assist in automacally switching the energy supply between the grid and the
MANGO POWER backup power sources.
Note: When two MANGO POWER E units are connected in parallel, the output voltage can support a
240V split-phase and allows them to meet the requirements of most household appliances.
©2023 MANGO POWER. All rights reserved. MANGO POWER, the MANGO POWER logo, MANGO POWER Union, MANGO POWER E, MANGO POWER
mPanel Pro, and other trademarks or service names are the trademarks of MANGO POWER, inc. Date subject to change
4
2.2 What's in the BOX
MANGO POWER Union
No.
Type
Quanty
1
mPanel Pro
1
2
Expansion plug
3
3
Self-tapping screw
3
4
Manual
1
5
Warranty Card
1
6
AC Input Cable for POWER Move
1
7
AC Input Cable for POWER Home
1
8
AC Output Cable
2
©2023 MANGO POWER. All rights reserved. MANGO POWER, the MANGO POWER logo, MANGO POWER Union, MANGO POWER E, MANGO POWER
mPanel Pro, and other trademarks or service names are the trademarks of MANGO POWER, inc. Date subject to change
5
MANGO POWER E
No.
Type
Quanty
1
mPanel Pro
1
2
Expansion plug
3
3
Self-tapping screw
3
4
Manual
1
5
Warranty Card
1
6
AC Input Cable
2
7
AC Output Cable
2
8
E-Link Cable
1
©2023 MANGO POWER. All rights reserved. MANGO POWER, the MANGO POWER logo, MANGO POWER Union, MANGO POWER E, MANGO POWER
mPanel Pro, and other trademarks or service names are the trademarks of MANGO POWER, inc. Date subject to change
6
2.3 Product specicaon
Product
mPanel Pro
Size
554*280*108mm
Mains input voltage
120V, 240V
Mains input current
50A
Output port
2×30A
Backup input Port
2×30A
Load output port
4x15A
Working temperature
-10°C- 45°C
2.4 Features
©2023 MANGO POWER. All rights reserved. MANGO POWER, the MANGO POWER logo, MANGO POWER Union, MANGO POWER E, MANGO POWER
mPanel Pro, and other trademarks or service names are the trademarks of MANGO POWER, inc. Date subject to change
7
NO.
Name
Descripon
1
Rotary Switches
Controls the output circuit to accommodate the power
supply of four output circuits and allows the power supply
to be quickly switched between the grid and the power
backup soluon.
2
Grid Breaker
Controls the shutdown of the mains input.
3
Output Breaker
Controls the shutdown of the mains input
3
Neutral load Access
Terminal
Connects to the output neutral wire line.
4
Live Load Access Terminal
Connects to the output live wire - the maximum current
of a single port is 15A.
5
Mains Input
The mains input live wire is connected to the L terminal,
the mains input neutral wire is connected to the N
terminal, the earth wire is connected to the PE terminal,
and the maximum current is 50A.
6
Output-1 Port
Connects to the input port of MANGO POWER Union or
MANGO POWER E device - the maximum current is 30A.
7
Output-2 Port
Connects to the input port of MANGO POWER Union or
MANGO POWER E device - the maximum current is 30A.
8
Backup Input-1 Port
Connects to the output port of a separate Power Move,
Power Home, or MANGO POWER E device - the
maximum current is 30A.
9
Backup Input-2 Port
Output port when connecng the MANGO POWER
Union device or 2 sets of the MANGO POWER E device -
the maximum current is 30A.
©2023 MANGO POWER. All rights reserved. MANGO POWER, the MANGO POWER logo, MANGO POWER Union, MANGO POWER E, MANGO POWER
mPanel Pro, and other trademarks or service names are the trademarks of MANGO POWER, inc. Date subject to change
8
3. Product Installaon
3.1 Materials Required for Installaon
●Power cables:
A 6 AWG black silicone cable, a 6 AWG white silicone cable, and a 6 AWG green-
yellow silicone cable.
A 12 AWG black silicone cable and a 12 AWG white silicone cable.
●Tools:
Power drill, screwdriver, and insulated gloves
3.2 Product Fixing
(1) Mark the posions of the three xing holes on
the wall where the product needs to be installed.
Use a power drill to make holes at the marked
posions for installaon, insert expansion plugs
into the holes, and screw a self-tapping screw
into the top screw hole.
(2) Hang the mPanel Pro on the top screw that
was just inserted so that the two lower screw
holes align with the installaon holes below the
mPanel Pro. Take out the other 2 self-tapping
screws, align them with the two holes, then
insert and ghten them.
Inhaltsverzeichnis
Andere MANGO POWER Stromversorgung Handbücher
