MangoKit MD3 Bedienungsanleitung

Table of Contents

1 Introduction - --------------------------------------01

1.1 Safety instruction ---------------------------------------01

1.2 Features ---------------------------------------02

1.3 Carton contents ---------------------------------------02

2 Controls, connectors and display

2.1 Main controls ---------------------------------------02

2.2 Connectors ----------------------------------------04

3 Started and setup ---------------------------------------05

4. DAB radio mode ---------------------------------------05

5 FM radio mode ---------------------------------------08

6 Bluetooth mode ---------------------------------------09

7 Alarms snooze and sleep ---------------------------------------10

7.1 Alarms ---------------------------------------10

7.2 Snooze ---------------------------------------11

7.3 Sleep ---------------------------------------12

8 System settings ---------------------------------------12

8.1 Equalizer ---------------------------------------13

8.2 Time/Date ---------------------------------------14

8.3 Backlight ---------------------------------------14

8.4 Language ---------------------------------------15

8.5 Factory reset ---------------------------------------15

9 Troubleshooting and error messages

9.1 Error messages -------------------------------------15

9.2 Troubleshooting --------------------------------------16

10 Technical Specification --------------------------------------17

1. Introduction

1.1 Safety Instructions

Please store this instruction manual for future reference.

• Do not use this product near water or moisture.

• Clean only with a dry cloth.

• Unplug this product from the wall outlet before cleaning.

• Place the unit on a solid surface.

• Do not put it in a closed bookcase or a cabinet that may keep air

from flowing through its ventilation openings.

• Do not install near any heat sources, such as radiators, heat

registers, stoves or other appliances that produce heat.

• Protect the power cord from being walked on or pinched

particularly at plugs and the point where they exit from the product.

• Servicing is required when the product has been damaged. Do not

attempt to service this product yourself. Opening or removing

covers may expose you to dangerous voltages orother hazards.

• Please contact the manufacturer to be referred to an authorized

service center near you.

• To prevent risk of fire or electric shock, avoid over loading wall

outlets, extension cords, or integral convenience receptacles.

• Do not let objects or liquids enter the product.

• Use proper power sources. Plug the product into a proper power

source, as described in the operating instructions or as marked on

the product.

1.2 Features

This manual describes how to use the MD3 with the following

modes:

• DAB/DAB+ digital radio with a wide choice of channels and digitaL

quality sound broadcast free-to-air.

• FM with RDS (Radio Data System)

• Bluetooth to act as a Bluetooth wireless speaker for Bluetooth

capable smart devices.

1.3 Carton contents

After you unpack the box, you will find the following items:

• 1 MD3 unit

• 1 Owner’s manual

• 1 Power adaptor

2. Controls, connectors and display

2.1 Main controls

3 4 5 6 7 8 9

1.PRESET: To store preset 1 or 2, Press and hold the preset 1 or 2

buttons until the display shows the text ‘preset # stored’ . To store

preset 3-20, Press and hold preset button 3+,The display will shows

a list of the Preset stores numbered 1 to 20, these are displayed as

either ‘Empty’ or with the currently stored station name. Use the

/ button to choose a preset memory then press ‘Select’ to store

the currently-playing station. After confirming the preset station is

stored the display reverts to the Now playing screen.

Recall a station from the Preset list

To recall preset 1 or 2, Press preset button 1 or 2. This will play the

radio station stored in preset 1 or 2. To recall a preset 3-20. Press

preset button 3+.The display will show a list of the presets stored

number 1-20.Use the / button to choose a preset and press

‘Select’ to play that station.

2. press the MENU to show the MENU for the current mode. MENU:

Press again to show now playing screen.

3 press the BACK to return to the previous screen.. BACK:

4. SELECT/ VOLUME/MUTE/SNOOZE:

a. Turn on or back to standby mode (showing clock and Power:

date), or cancel sleep, or cancel alarm function.

b. Rotate the SELECT button to adjust the volume up or VOLUME:

down during playback.

c. Press the SELECT button to mute the music when MUTE:

playing.

d. Rotate the SELECT button scroll through a menu or SELECT:

station list. Press to the SELECT button to select the chosen option.

Press and hold Select button to auto scan DAB/FM stations.

e. Press the SELECT button to snooze a set time when SNOOZE:

alarm sounding.

5 SOURCE: , , Press to Source to select different modes DAB FM

Bluetooth.

6. View more information about the station or track playing. INFO:

Press again to cycle through further information screens then return

to the normal playing screen.

FULL SIDESHOW: Press and hold INFO button to switch DAB

normal playing screen image to full screen slide show image.

7. : Next: Press to select the next track under FM/DAB/

Bluetooth Mode; Press and hold the button 2 seconds to auto-

scan the stations under the FM mode.

8. : Press to select Play/Pause under BT mode.

9. : Previous: Press to select the previous track under FM/DAB

/Bluetooth mode.; Press and hold the button 2 seconds to

auto-scan the stations under the FM mode.

2.2 Connectors.

As shown below has connectors [ from left to right ] for

the following:

10 1 1 12

10 DC power in (5V) 12 Battery compartment.

11 Headphones out.

9. Previous

1. Preset 1,2,3+

7. Next

2. Menu

3. Back

6. Info

4. Power on/off&Volume&Select/Snooze/Mute

5. Source

8. Play/Pause

3. Started and setup

MD3 is easy to use. To play DAB or FM radio, all you need is a

power source (a 100-240 V mains supply);

1). Place MD3 on a suitable shelf or table.

2). Extend the telescopic antenna.

3). Connect the power adaptor between MD3 and the mains supply.

4. DAB radio mode

DAB radio mode receives DAB/DAB+ digital radio and displays

information about the station and programme /track as broadcast.

To enter DAB mode, either press Mode until the display shows DAB

Radio.

4.1 Scanning for stations

The first time you use MD3, or if the station list is empty, the

radio automatically performs a full scan to see what stations are

available. You may also need to start a scan manually to update

the list of stations for one of the following reasons:

New stations may become available from time to time.

If reception was not good for the original scan (for example the

antenna was not up), this may result in an empty or incomplete list of

available stations.

If you have poor reception of some stations causing the audio to

break up, you may wish to list only stations with good signal

Strength.

To do a full scan Select Menu > Full scan.

Once a scan is complete, the radio returns to playing the

previously-selected station or first station on the station list.

To remove stations that are listed but unavailable Select Menu

> Prune invalid.

4.2 Manual tune

As well as the normal method of scanning, you can also manually

tune to a particular channel / frequency. This can be useful for

adjusting your antenna to achieve the best possible reception and

scanning a particular channel to update the station list.

To manually tune

Press Menu > Manual tune then use select control button to display

a particular channel/frequency, press Select to tune to that

channel/frequency.

The display shows a live indication of the received signal strength

on the selected frequency.

Adjustments to your antenna will be manifested in the received

signal strength displayed.

Note: The division in the signal strength bar indicates the audio

quality threshold – if the signal strength, as indicated by the solid

rectangles, falls below this threshold the audio quality will

deteriorate.

When a channel/frequency is selected MD3 also scans for any DAB

stations on the selected frequency and updates the station list with

any new stations found. To listen to any stations found return to the

Now playing screen and select the required station from the station

list as normal.

4.3 Now playing information

While a station is playing, the screen shows its name and DLS

(Dynamic Label Segment) information broadcast by the station such

as programme name, track title and contact details.

Slideshow

The normal now playing screen shows a thumbnail of the currently

available slideshow image. (If no slideshow image is available a

default DAB thumbnail image is displayed). The Select button

cycles through the following slideshow displays.

Slideshow image and DLS text being broadcast by the current

station.

Normal now playing screen.

To view further information Press Info .

Each time you press Info , the next set of information is displayed,

cycling through: DLS text, DL Plus information (this is only

displayed if broadcast by the station), programme type,

ensemble name, channel number/frequency, signal strength, power

status and date.

4.4 Other settings

Dynamic range compression (DRC)

This function reduces the difference between the loudest and

quietest audio being broadcast.

Effectively, this makes quiet sounds comparatively louder, and

loud sounds comparatively quieter.

Note: DRC only works if it is enabled by the broadcaster for a

specific station.

To change the DRC setting Select Menu > DRC > The options

available are: DRC high | low | off.

5 FM radio mode

FM radio mode receives analogue radio from the FM band and

displays RDS (Radio Data System) information about the station

and show (where broadcast).

To enter FM mode: Press Mode until the display shows FM Mode.

5.1 Selecting stations

The first time you select FM radio, MD3 is set to the lowest

frequency in the FM band. On subsequent selections the last used

frequency/station is displayed.

To scan for a station in FM mode

Press Select MD3 scans up through the FM band frequencies,

showing the current frequency on the screen display.

A scan stops when a signal is found. MD3 can be set to stop at each

station or only at stations with a strong signal.

Alternatively, you can tune, using the select control button to rotate

in 50 kHz steps.

5.2 Now playing information

While FM radio is playing, the screen shows its frequency, or if RDS

information is available, station name and any further

RadioText' information. If no information is available, just the

frequency and a No RadioText message is shown.

To view further information about the broadcast Press Info.

Each time you press Info, the next set of information is displayed,

cycling through: RDS Radio text programme type, frequency, name,

mono/stereo,power status, and date.

5.3 Settings

Scan settings

By default, FM scans stop at any available station (All

stations).This may include poor quality audio from weak

stations.

Options: Strong stations only | All stations

To change the scan settings, to stop only at stations with good

signal strength

Select Menu > Scan setting then Strong stations only.

Audio settings

By default, all stereo stations are reproduced in stereo. For

weak stations, this may result in poor quality audio. The audio

quality can be improved using mono.

Options: Stereo allowed | Forced mono

To play weak stations in mono

Select Menu > Audio setting > Forced mono.

6. Bluetooth

Bluetooth mode allows MD3 to act as a wireless speaker playing

audio content from a connected Bluetooth capable device.

To enter Bluetooth mode: Press source to choose Bluetooth mode

To connect a Bluetooth capable device. Use your Bluetooth

capable smart device to pair and connect with the MD3.

6.1 Display information

The screen displays either a Bluetooth Pairing or Bluetooth

connected message depending on the connection state.

7 Alarms snooze and sleep

As well as a clock/calendar, there are two versatile wake-up alarms

with snooze facility, and a sleep function to turn the system off after

a set period of time. The alarm sound for each alarm can use a

buzzer or a selection from the audio sources.

To set the clock/calendar

The settings for the internal clock and setting Alarm, Snooze

and Sleep function are all accessible via the Systems Setting

menu.

7.1 Alarms

Note: Alarms will only function when the MD3 unit is On or in

Standby mode.

An active alarm is indicated by its icon in the bottom line of the

display.

Note: Alarms can be switched on or off in standby mode (see

below).

To set alarms

Press Menu/System setting/Alarm and use the Select control knob

to select the required Alarm 1 or 2.

To exit alarm setting mode, press Menu or Back (alternatively, the

Alarm display will timeout and automatically return to the Now

Playing screen after a short time).

The alarm setup prompts you for the following parameters.

Select a value for each parameter in turn the select turning

control button and press Select to confirm and move on to the

next parameter.

Parameters

Alarm – Off | On

Frequency - Daily | Once | Weekends | Weekdays

109

Choose the days on which the alarm is active .

Note: if you choose Once’ you are prompted to enter the required‘ ,

date.

Wake Up time – hours and minutes

Source - Buzzer Digital Radio FM | |

If DAB or FM is chosen as the audio source you will also be

prompted to select the Last played station.

Duration minutes– 15 | 30 | 45 | 60 | 90 | 120

If the alarm is not cancelled MD3 returns to standby after this time

period.

Volume – rotate the top control button to set the required alarm

volume 4-16.

This is the volume the alarm will build up to. (Initially the alarm

sounds at a low volume and gradually gets louder to the set volume).

In all listening modes active alarms are indicated by displaying the

relevant Alarm and or Alarm icons 1 / 2 .

At the set time the alarm will sound quietly at first then gradually , , ,

building up to the set volume When an alarm sounds the icon in the . ,

display flashes .

To cancel a sounding alarm and switch the radio to standby by

pushing in the SELECT knob.

7.2 Snooze

To temporarily silence a sounding alarm press Snooze You can , .

change the snooze period by repeatedly pressing Snooze .

Snooze periods are 5, 10, 15 and 30 minutes. The radio returns to

standby for the set time period with a snooze countdown displayed.

When the countdown reaches 0 (zero) the alarm is triggered again.

Push in SELECT knob and hold 3 seconds to fully cancel a sounding

alarm and switch the radio to standby.

7 Sleep.3

To set the sleep timer while the radio is playing Press > Menu

System setting>Sleep. You can choose the sleep delay time in

minutes from: Sleep Off | 15 |30 | 45 | 60 | 90.

Use SELECT knob to cycle through the options then PUSH in

SELECT knob to choose the displayed option.

Once you select a sleep delay period the display returns to ,

the Now playing screen displaying a Crescent moon icon and

the remaining time in minutes before the sleep time expires , , .

After the sleep delay period the radio switches to standby

mode.

8 System settings

The System Settings allow you to tailor the MD3 with a variety of

options to suit you.

To access system settings from any mode Select Menu >System

Settings >, then choose from the various options as described in the

menu as below.

The System Setting Menu options are :

• Sleep

• Alarm

• Equaliser

• / Time Date

• Backlight

• Language

• Factory Reset

• Software upgrade

• Software version

1211

To navigate through the menus

The following controls are used to move about the menu tree to

choose and select the required settings:

SELECT– (pressing the Select knob) this selects the currently

displayed option, if the option has a further sub-menu the first option

of the sub-menu is displayed. If the option is a setting value, the

displayed value is selected and either the next setting is highlighted

or, if there are no further settings, the display returns to the parent

menu for that setting.

SELECT knob– cycles forwards and backwards through the current

menu or setting options.

BACK - jumps back to the parent menu of the currently

displayed menu or setting.

MENU to return to the Now Playing screen.

8.1 Equalizer

This presents a My Equaliser option to allow you to create your

own equaliser settings.

8.1.1 My EQ setup…

This option allows you to set a bias in the treble and bass audio

frequencies and turn 'Loudness' On or Off. Values can be set

between -7 (Minus 7) and +7 (plus 7).

Treble – (Use the select control button to choose a bias value

between -7 and +7)

Bass – (Use the select control button to choose a bias value

between -7 and +7)

Loudness – No or Yes. (When Yes, low-level high and low frequency

sounds are boosted to give a ‘fuller' sound.)

8.2 Time/Date

The time and date can be updated manually or automatically With

auto-update, the time and date are automatically synchronised with

national time signals broadcast over DAB and FM (when available).

You can also select the display format for the time and date.

The Time menu contains the following options:

• Set Time/Date – (see below)

• Auto update - Update from Any | Update from digital radio | Update

from FM | No Update

• Set 12/24 hour - 12 | 24

• Set date format - DD-MM-YYYY | MM-DD-YYYY.

Set time/date

This option is for manually setting the time and date

displayed.The time displays as hh:mm, with the first value,

hh, active (flashing). Adjust each value using the select control

button and press Select to confirm. The next value then

becomes active and flashes. The date values follow and are set

in the same way.

Note: The date displays as DD-MM-YYYY or MM-DD-YYYY

depending on your choice of date format (see above).

8.3 Backlight

The MD3 has a backlight with three brightness settings, and

adjustable timeout (this is the time delay, in seconds, after which the

display switches to the Dim level).

There are three settings:

• Timeout - Light On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 sec

• On level - High | Mid | Low

• Dim level - High | Mid | Low

1413

8.4 Language

The default language is English. To change, select Menu > System

settings > Language >then select your language.

8.5 Factory reset

A factory reset clears all user defined settings, replacing them

with the original default values, so time/date,preferences/

settings and DAB station list are all lost.

If you select Factory reset, you are asked to confirm by

selecting “Yes”.

9 Troubleshooting and error messages

9.1 Error messages

Message

Description

DAB mode

Service not available

No DAB reception

Signal error

The DAB signal has been interrupted.

No DAB Station

The current station does not broadcast an identity name.

(No Name)

The listed station cannot be found.

No stations found

No DAB stations are available - check aerial.

FM mode

No RadioText

No RDS text information is available on this station.

No PTY

No RDS programme type information is available.

No Name

No RDS station name is being broadcast

General messages

Update failed

Software upgrade failed

9.2 Troubleshooting

Check/move antenna, Move radio

Rescan high-strength stations only.

For DAB or DAB+, check the

current status of local coverage

with your national digital radio

authority.

As above then rescan stations

Solutions

Low signal

Cause

strength

FM: Hiss

DAB: burbling/

intermittent

cut-out

DAB:

No stations

available’

message

Problem

Message

Description

Time is not set

No time value is currently set on this platform.

Time Not saved

Any changes made to the time settings will be lost.

Alarm Not saved

Any changes made to the Alarm settings will be lost.

Invalid Date

The entered value does not match a valid date.

1615

Power Supply: 5V DC or 4 x AA batteries [battery not included]

Dimension (mm): 175*106*54MM

Weight: 0.45KG

10 Technical Specification:

Model: MD3

Type:

Speaker:

1 X 2.5” full range speaker

Portable DAB & FM Radio

Power: 3W RMS

Specifications subject to change without notice.

If you have any questions or suggestions, Please contact with us

freely.

info@mangokitsmart.com

www.mangokitsmart.com

Inhaltsverzeichnis

Andere MangoKit Radio Handbücher

MangoKit

MangoKit MP2 Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

auna multimedia

auna multimedia Yellowstone 10026851 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung