MM436
CCCllleeeaaannniiinnnggg aaannnddd mmmaaaiiinnnttteeennnaaannnccceee
To maximum the efficiency of the heater
cleans regularly. Switch power switches
to OFF position, unplug and allow
the heater to cool. Wipe surfaces with
a soft cloth. Do not use detergent or
abrasives as this with scratch the surface.
Ensure the intake grills free front dust,
as this will reduce the airflow. Light ac-
cumulated dust can be removed with
soft cloth or vacuum cleaner. Allow sur-
face to fully dry before using the heater
again.
MMMaaaxxxiiimmmuuummm ttthhheee LLLiiifffeee ooofff YYYooouuurrr HHHeeeaaattteeerrr
Avoid knocking or scratching the
heater.Do not in dusty environment.
When not in use cover heater and store
in clean, cool and dry area.
TTTooo UUUssseee
Turn the heater to the “o” position before
plugging in. The operating temperature
is selected by a combination of the heater
switches and thermostat.
Thehottestsetting
willbewhen theheater
switchesarebothon
andthethermostat is
turned to “maximum”.
To determine
the correctworking temper-
ature for your
conditions, turn the heater to
“high” and the thermostat to “maximum”
when the
room has reached the required
temperatu
re turn the thermostat slowly
to the left until the temperature is o. The
tempera
ture will now be kept constant. If
you want
to lower the operating temper-
ature select
the one of the heater switch
only and
repeat the above procedure. The
heater is
tted with an automatic cutout
in the event that it overheats. If is this ac-
tivates, turn the heater to the o position
and unplug. Allow the heater to cool and
remove anything restricting the airow
before using the heater again. If the auto-
matic cut out operates repeatedly contact
a quantied electrician for advice.
Notes
For maximum benet, closing windows
and door when the heater is open Do not
cover the ventilation holes as this will cau se
overheating and will activate the cut out.
NOTE!
Product design and Technical paramet-
ers may be change without notice. This
mainly concerns parameters technic-
al, software and user manual present.
Users Manual is a general orientation
on service product.
Manufacturer and distributor do not
assume any responsibility as com-
pensation for any inaccuracies errors in
the descriptions appearing in this user
manual.
10
