Marantz RC-5400 Bedienungsanleitung

Rhein Tech Laboratories Client: Philips RCS

360 Herndon Parkway

Suite 1400

Model: RC5400

FCC ID: PT5RC5400

Herndon, VA 20170 Standards: FCC Part 15.231

http://www.rheintech.com RTL WO# : 2003133

Page 29 of 49

APPENDIX G: MANUAL

Please see the following pages.

Model RC5400 User Guide

Touch Screen Remote Control

Automating Your Home Theater With The Marantz RC5400

RC5400 Remote Control User Guide

The information in this manual is copyright-protected. No part of this user guide may be

copied or reproduced in any form without prior written consent from Marantz.

MARANT SHALL NOT BE LIABLE FOR OMISSIONS OR FOR TECHNICAL OR EDITO-

RIAL ERRORS CONTAINED IN THIS USER GUIDE. MARANT SHALL NOT BE HELD

LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE

SUPPLYING OR USE OF THIS INFORMATION. MARANT SHALL NOT BE HELD LIA-

BLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE

PERFORMANCE OR USE OF THE MATERIALS DESCRIBED IN THIS USER GUIDE.

The information in this user guide may be subject to change without prior notice.

All other brand or product names are trademarks or registered trademarks of their respec-

tive companies or organizations.

FCC Complian y:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rule. These limits are designed to provide reasonable protection

against harmful interference in residential installation. This equipment generates, uses, and can

radiate radio frequency energy and , if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is not guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

nReorient or relocate the receiving antenna.

nIncrease the separation between the equipment and receiver.

nConnect the equipment into an outlet on a different circuit from the receiver.

nConsult the dealer or an experienced radio/TV technician for help.

CAUTION:

The user changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

For Europe

User Guide

Introdu tion 2

1. The Marantz RC5400 2

2. The Battery 3

Getting Started 6

1. Activating the RC5400 6

2. Navigating the RC5400 7

3. Operating a Device 11

4. Check Battery Life - The Information Page 12

5 The Setup Pages 12

6. The Mode Menus 14

7. Adjusting the Touch Screen Contrast 14

Customizing Your RC5400 16

1. Introduction 16

2. Cloning All Your Existing Remotes 16

3 Complex Operation? Macros or Help... 18

4. Programming Help Lists 20

5. Macro Capabilities 21

6. Programming Macros 23

Referen e 26

1. Learning IR Commands 26

2. Labeling Buttons, Pages and Devices 30

3. Adding Devices 33

4. Deleting Buttons and Devices 37

5. Moving Devices 39

6. Programming Macros 40

7. Using the Remote Control with RF (Radio Frequency) 44

8. Wizz.it Software 46

Maintaining the RC5400 48

Troubleshooting 49

Frequently Asked Questions 52

Overview of Symbols 54

Spe ifi ations 56

Index 57

Servi e and Support 62

Table of Contents

User Guide

The RC5400 is designed to control most devices that understand infra-

red (IR) remote control signals. Its easy-to-use Touch Screen and its

intuitive interface make it a perfect remote control for every user.

The RC5400 is completely customizable and programmable. You can

add devices and functions, re-label buttons, record macros and animate

your macros. Although the RC5400 is pre-programmed for Marantz

components, a vast collection of built-in tab guided panels with pre-

arranged button art enables you to easily choose the perfect interface

for any non-Marantz component. The RC5400 easily “learns”com-

mands from the vast majority of manufacturers’remote controls.

Introdu tion

VOLUME Up/Down

CHANNEL Up/Down

MUTE buttons

(page 11)

Infrared (IR) Eyes (page 26)

Right Fun tion

button (page 8)

4-Way Cursor navigation

buttons (page 11)

Page +/ -

buttons (page 10)

Ba klight

button (page 6)

USB Port

(page 47)

HOME

button (page 7)

1. The Marantz RC5400

Tou h S reen

Left Fun tion

button (page 8)

button (page 11)

ENTER

button (page 11)

EXIT

button (page 11)

The Touch Screen

When you use the RC5400 for the first time, you will have to:

•Install the battery pack.

•Place the RC5400 in the docking station and charge the

RC5400.

•Tap the INFO button on the Upper System Area to check

battery life.

Warning:Use the docking station only with supplied NiMH rechargeable

battery pack.

We strongly advise you NOT to plug other appliances (like mobile

phones, PDA’s) into the docking station. This will damage both

the connector and the appliance.

User Guide

Introdu tion

MODE icon

(page 7)

INFO

button(page 3)

DEVICE SCROLL

button (page 9)

DEVICE OVERVIEW

button (page 8)

UPPER TOOL BAR

CURSOR NAVIGATION

button (page 9)

USER CONTROL AREA

LOWER TOOL BAR

PAGE OVERVIEW

button (page 9)

2. The Battery

DEVICE SCROLL

button (page 9)

User Guide

Installing the Battery Pack

1 Press the latch on the battery cover and remove the battery

cover from the RC5400.

2 Place the battery pack in the battery compartment.

3 Plug the cable of the battery pack in the connector as illustrated.

4 Place the battery cover back on.

Note Make sure the cable of the battery pack does not get stuck

between the molded interior and the battery cover.

After a few seconds, the RC5400 starts up automatically and an

Introduction screen appears. The RC5400 beeps twice to

indicate that it has finished starting up.

Because the battery pack of the RC5400 is not fully pre-

charged, you will have to charge it as described in the next

page.

Introdu tion

Charging the RC5400

For charging the RC5400, you use the docking station.

1 Connect the power adapter to the docking station and plug it

into a wall outlet.

2 Place the RC5400 in the docking station.

Make sure you hold the RC5400 at an angle of 30° to 45°

when you place it in the

docking station.

Charging starts immediately. The blue charging LED on the front

of the docking station indicates charging takes place. When the

RC5400 is fully charged, the LED goes off.

Note Normal charging time is 2 to 3 hours, depending on the

condition of the battery pack.

You can operate the RC5400 while it is being charged.

The battery pack does not have to be entirely empty before

recharging.

You can place the RC5400 in the docking station at any time.

When the battery is running low, the Low Battery

icon flashes in the Upper Tool Bar. Recharge the

RC5400 as soon as possible to ensure perfect performance.

Note The RC5400 retains all settings when the battery is completely

dead. You will only have to reset the clock.

User Guide

Introdu tion

30° to 45°

User Guide

Turning on the Touch Screen

Tap the Touch Screen gently with your finger or a blunt, soft

object like a pencil eraser.

The display is activated and you see the Home page.

Notes ·If the display stays blank or becomes black, adjust the contrast

using the buttons on the left side (see page 15).

·If another panel is displayed, press the HOME button.

·The RC5400 shuts down automatically after being

left alone for a few seconds (you can adjust the time

out period in the Setup pages).

Using the Backlight

RC5400’s backlight can be activated in three different ways,

Pressing the BACKLIGHT button

By pressing the BACKLIGHT button on the left side of the

RC5400, the backlight is turned on.

Pi king up the RC5400

The RC5400 has the Pickup sensor in it. By picking your

RC5400 from the docking station and tilting more than 50°,

the backlight is turned on.

Note To enable this function, the “pickup sensor” setting in the Setup

has to be set to “Active” (see page 13) .

Tapping the Tou h S reen

By tapping the Touch Screen,the backlight is turned on.

Note To enable this function, the “Auto backlight” setting in the Setup

has to be set to “Active” (see page 13).

The backlight shuts off after a few seconds to save power.

Getting Started

1. A tivating the RC5400

Modes

The RC5400 has different “Modes”. When you activate the RC5400

for the first time, it starts up in USE mode allowing you to immedia-

tely operate your devices. In USE mode, the center of Lower Tool

Bar displays the Mode icon .Tap and hold the Mode icon

more than 3 seconds. The Mode menu page will appeares. If the

center of Lower Tool Bar shows another icon, like , tap it to

reveal the Mode menu and press the Left function button labeled

“Exit” to return to USE mode.

Note If you do not see the Mode icon; it has been deactivated via the

Setup. Press and hold the center of Lower Tool Bar to override

the Mode menu deactivation.

Your RC5400 is capable of displaying hundreds of different control

pages. RC5400 presents you various ways to navigate to the speci-

fic device and page easily.

Navigating the Devices

Home — The Home Page displays

convenient instant jump buttons

to the main control page of your

system devices (your Amp., TV, DVD

player etc.). These buttons

also select the Input of your Home

Theater Receiver or Preamp.

Access Home page by

tapping the Home button

at the bottom left of the remote.

lDevice buttons in the Home page perform two actions

when pressed;

1, Jumps to the main page of the Device.

2, Changes your home theater receiver/preamp to the

appropriate input. To program for a non-Marantz

receiver/preamp, see page 28.

User Guide

Getting Started

2. Navigating the RC5400

Andere Handbücher für RC-5400

Inhaltsverzeichnis

Andere Marantz Fernbedienung Handbücher

Marantz

Marantz RC2001 Bedienungsanleitung

Marantz

Marantz RC5000i Bedienungsanleitung

Marantz

Marantz RC-9500 Bedienungsanleitung

Marantz

Marantz RC5000i Bedienungsanleitung

Marantz

Marantz RC1200 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Marantz

Marantz RC101 Kurzanleitung

Marantz

Marantz RC-9500 Bedienungsanleitung

Marantz

Marantz RC-1400 Bedienungsanleitung

Marantz

Marantz RC-1400 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Marantz

Marantz RC3200 Bedienungsanleitung

Marantz

Marantz RC3001/E1B Bedienungsanleitung

Marantz

Marantz RC5200 Bedienungsanleitung

Marantz

Marantz RC5000 Bedienungsanleitung

Marantz

Marantz RC3200 Bedienungsanleitung

Marantz

Marantz RC3200 Bedienungsanleitung

Marantz

Marantz RC-1400 Bedienungsanleitung

Marantz

Marantz RC-5400 Bedienungsanleitung

Marantz

Marantz RC3200/A Bedienungsanleitung

Marantz

Marantz RC2001 Bedienungsanleitung

Marantz

Marantz RC9200 Bedienungsanleitung

Marantz

Marantz RC-9500 Bedienungsanleitung

Marantz

Marantz RC2000MKII Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung

Logitech

Logitech HARMONY 950 Bedienungsanleitung