Marmitek MegaView50 Bedienungsanleitung

MEGAVIEW50 & 51

Composite audio/video

extender over cat5

MEGAVIEW50 & 51

Composite audio/video

extender over cat5

20286/20090119 • MEGAVIEW 50&51

USER MANUAL 3

GEBRAUCHSANLEITUNG 9

GUIDE UTILISATEUR 15

MODO DE EMPLEO 21

MANUALE D’ISTRUZIONE 27

GEBRUIKSAANWIJZING 33

2© MARMITEK

Megaview50 & 51

ENGLISH

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry

spaces. Do not expose the components to rain or moisture. Do not use the product

close to a bath, swimming pool etc.

• Do not expose the components of your systems to extremely high temperatures or

bright light sources.

• In case of improper usage or if you have altered and repaired the product yourself, all

guarantees expire. Marmitek does not accept responsibility in the case of improper

usage of the product or when the product is used for purposes other than specified.

Marmitek does not accept responsibility for additional damage other than covered

by the legal product responsibility.

• This product is not a toy. Keep out of reach of children.

• Do not open the product: the device may contain live parts. The product should only

be repaired or serviced by a qualified expert.

• Only connect the adapter to the mains after checking whether the mains voltage

is the same as the values on the identification tags. Never connect an adapter or

power cord when it is damaged. In that case, contact your supplier.

1. INTRODUCTION

Congratulations on your purchase of the Marmitek MegaView50/51! The

MegaView50/51 allows you to extend composite video and audio easily through CAT5

Ethernet cable (max. 300 meters). Devices which can be connected to this include a

settop box, Media Center PC, Media Player, hard drive recorder, DVD player, satellite

receiver or surveillance camera.

The MegaView51 has a built-in “infrared return channel”, which allows you to operate

the connected device from another room or through closed cabinet doors using your

own remote control.

All Marmitek products are manufactured with the utmost precision and are of high

quality. Please read this manual carefully and follow the instructions to enjoy the

possibilities of this product optimally.

4© MARMITEK

2. CONTENT OF THE PACKING

MegaView50 MegaView51

1x transmitter (Audio/Video Transmitter) 1x transmitter (Audio/Video Transmitter)

1x receiver (Audio/Video Receiver) 1x receiver (Audio/Video Receiver)

1x User manual 1x Infrared receiver

1x Infrared extender cable with 2 IR LEDs

1x Power adapter

1x User manual

3. CAT5E CABLE REQUIREMENTS

• UTP-, FTP- or STP-cable

• 24AWG or lower

• Solid twisted pair

• 100 ohm at 1MHz

• RJ-45 jack according to EIA/TIA T568B standard

Instead of CAT5 cable, CAT6 cable may also be applied (this offers better quality).

4. INSTALLATION

In order to check the correct operation of the system, it is recommended to check the

planned set-up first. For this purpose, please connect everything as indicated below

but do not yet stick the components or fasten the screws.

1. Switch off all A/V devices before you start connecting.

2. Connect the A/V device (for instance the settop box or Media Center PC) to the

Audio and Video IN of the MegaView50/51 transmitter (Audio/Video Transmitter)

[1] using a cinch cable (not included).

AUDIO VIDEO

OUT

DVD PLAYER

VIDEO

AUDIO( R / L )

Transmitter

IRExtendercable

AUDIO

VIDEO

INPUT

DISPLAY

VIDEO

AUDIO ( R / L )

IR WINDOW

IR Receiver

IR OUT

GND

V+

IR Receiver

Receiver IR Receiver

12VDC

POWER IN

up to 300m with Cat 5e cable

Megaview50 & 51

ENGLISH

3. Connect the MegaView50/51 receiver (Audio/Video Receiver) to your display device

[2] (for instance TV or projector) using a cinch cable (not included).

Please make sure that the colours of the plugs correspond to the input sockets. That

means red to red, white to white and yellow to yellow.

4. Use a CAT5 Ethernet cable (not included) to connect the MegaView50/51 transmitter

and receiver to each other [3].

INSTALLATION IR (INFRARED) RETURN (MEGAVIEW51 only)

1. Position the MegaView51 transmitter at an accessible location behind or next to

your A/V devices and close to a wall socket. Please take into account the cable

length of the IR LEDs and make sure that the connections remain accessible.

2. Plug the required IR Extender cable (with the 2 IR LEDs) [4] into the MegaView51

transmitter.

• Self-adhesive foil has been supplied with the IR LEDs. This allows you to attach the

IR LEDs to the IR sensor of your A/V device.

• Test the position and operation of the IR LEDs before sticking them definitively to

the IR sensor of your A/V device.

• In case you want to operate another device besides your A/V device (of which you

are transmitting the signal), you may use the second IR LED for this.

• If you are only using one of the two IR LEDs, please leave the second IR LED

unused. Never remove it from the extender cable!

3. Now connect the IR Receiver [5] to the MegaView51 receiver.

• Position the supplied IR receiver in sight of your infrared remote control and as

little as possible in the proximity of potential sources of interference such as direct

sunlight, strip light, energy saving bulbs, etc. The infrared indicator LED in the IR

receiver will light up or blink when it receives infrared communication. Use this

indicator LED to position the IR receiver at the most interference-free location

(indicator LED will not or hardly light up when it does not receive a signal).

• By using the supplied self-adhesive strip, placement is possible almost everywhere.

Please experiment with the right positioning before definite attachment of the IR

receiver.

• Attention! The adhesive strip may cause discolouration on certain surfaces or

leave behind traces of glue.

4. Connect the power adapter [6] to the “POWER” socket of the MegaView51 receiver

and plug the adapter into a wall socket.

6© MARMITEK

5. USAGE

1. Switch on the connected A/V device (for instance settop box or Media Center PC).

2. Switch on the display device (for instance TV or projector) and select the appropriate

input. Usually you will do this by pressing the 0, A/V or EXT button of your remote

control.

3. You will receive images from the connected A/V device immediately.

4. With the MegaView51 you may now also operate the connected device from this

room using your own remote control, by pointing it at the IR receiver.

6. FREQUENTLY ASKED QUESTIONS

Bad (or no) image and sound

• Check if all cables are connected properly.

• Check if the A/V device is switched on.

• Use only CAT5 cable as specified in chapter 3 (CAT5e Cable Requirements).

• Check if the CAT5 cable provides a solid connection (no cable faults).

• Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.

Please refer to attachment page 39

• Please ensure that the maximum cable length is not exceeded.

• Check if the cinch cables on the A/V device, the screen and the MegaView50/51 have

been connected to the correct colours.

• Install your system as far away from any RF sources (wireless devices).

Bad (or no) infrared return signal (MegaView 51)

• Both the built-in and the surface-mounted IR Receivers have a reception sensitivity

of approx. 10 meters at a 90 degrees angle of aperture. Range is also dependent on

the remote control used. The IR reception indicator LED in the IR receiver will light up

on reception of an IR signal.

• Check if the power adapter has been connected to the MegaView51 transmitter

• Please ensure that the IR receiver and the IR extender cable have been connected

properly and that they are fully plugged in.

• Please ensure that the LEDs of the IR extender cable are placed correctly to the

infrared sensor of the A/V device, this has to be done very precisely. The exact

position can be found easily by shining at it with a flashlight.

Do you have any questions that are not answered above?

Please check www.marmitek.com.

Megaview50 & 51

ENGLISH

7. TECHNICAL DATA

MegaView50 MegaView51

Audio/Video

Bandwidth Video: 6 MHz 6 MHz

Bandwidth Audio: 20 Hz to 20 kHz 20 Hz to 20 kHz

Impedance Video: 75 ohm 75 ohm

Impedance Audio: 600 ohm 600 ohm

Max. Input Audio/Video: 1.1 Vp-p 1.1 Vp-p

Max. CAT5e cable length: 300 meters 300 meters

Audio/Video Transmitter

A/V input: RCA (1x Video, 2x Audio) RCA (1x Video, 2x Audio)

Connection IR LED: - 1x 3.5mm jack plug

Dimensions: 106 x 61 x 29 mm 106 x 61 x 29 mm

Weight: 79g 84g

Audio/Video Receiver

A/V output: RCA (1x Video, 2x Audio) RCA (1x Video, 2x Audio)

IR receiver: - 1x 3.5mm jack plug

Power: - 100-240VAC/50Hz, 12VC 500mA

Dimensions: 106 x 61 x 29 mm 106 x 61 x 29 mm

Weight: 79g 84 g

IR Receiver

Frequency range: - 30-100 KHz

IR reception range: - ± 10 meters

Cable length: - 2 meters

IR receiver: - reception indicator LED:

IR angle of aperture: - 90º (+45º/-45º from centre)

Dimensions: - 51x10x8mm

IR extender cable

Connection: - 3.5 mm jack plug

IR LEDs: - 2x IR LED

Cable length: - 3 meters

Specifications may be modified without prior notice.

8© MARMITEK

8. OPTIONAL ACCESSORIES

Extra remote control

If you want to operate your device from various places in your home, or if you want

to use just one single remote control for all your A/V devices, then make your choice

from the complete range of Marmitek universal remote controls; EasyControl or

EasyTouch. These replace almost every remote control you are using at the moment.

More information about these so called universal remote controls can be found at

www.marmitek.com.

Connecting multiple devices

You want to connect multiple A/V devices? With the Marmitek Connect series you can

connect all your devices with just one cable, retaining quality. More information about

this so called switchgear can be found at www.marmitek.com.

Environmental Information for Customers in the European Union

European Directive 2002/96/EC requires that the equipment bearing this symbol on the product

and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates

that this product should be disposed of separately from regular household waste streams. It is your

responsibility to dispose of this and other electric and electronic equipment via designated collection facilities

appointed by the government or local authorities. Correct disposal and recycling will help prevent potential

negative consequences to the environment and human health. For more detailed information about the

disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop

where you purchased the product.

Megaview50 & 51

DEUTSCH

SICHERHEITSHINWEISE

• Um Kurzschluss vorzubeugen, dieses Produkt bitte ausschließlich innerhalb des

Hauses und nur in trockenen Räumen nutzen. Setzen Sie die Komponenten nicht

Regen oder Feuchtigkeit aus. Nicht neben oder nahe eines Bades, Schwimmbades

usw. verwenden.

• Setzen Sie die Komponente Ihres Systems nicht extrem hohen Temperaturen oder

starken Lichtquellen aus.

• Bei einer zweckwidrigen Verwendung, selbst angebrachten Veränderungen

oder selbst ausgeführten Reparaturen verfallen alle Garantiebestimmungen.

Marmitek übernimmt bei einer falschen Verwendung des Produkts oder bei einer

anderen Verwendung des Produktes als für den vorgesehenen Zweck keinerlei

Produkthaftung. Marmitek übernimmt für Folgeschäden keine andere Haftung als

die gesetzliche Produkthaftung.

• Dieses Produkt ist kein Spielzeug. Außer Reichweite von Kindern halten.

• Das Produkt niemals öffnen: Das Gerät kann Teile enthalten, worauf lebensgefährliche

Stromspannung steht. Überlassen Sie Reparaturen oder Wartung nur Fachleuten.

• Schließen Sie den Netzadapter erst dann an das Stromnetz an, nachdem Sie

überprüft haben, ob die Netzspannung mit dem auf dem Typenschild angegeben

Wert übereinstimmt. Schließen Sie niemals einen Netzadapter oder ein Netzkabel

an, wenn diese beschädigt sind. In diesem Fall nehmen Sie Kontakt mit Ihrem

Lieferanten auf.

1. EINFÜHRUNG

Herzlichen Glückwunsch zum Erwerb des Marmitek MegaVieuw50/51! Der

MegaView50/51macht esaufeinfacheWeisemöglich,Komposite-VideoundAudio über

CAT5 Ethernet Kabel (max. 300 Meter) zu verlängern. Geräte die hieran angeschlossen

werden können sind beispielsweise Settop Boxen, Media Center PC, Media Player,

HD-Recorder, DVD-Player, Satellitenempfänger und Überwachungskameras.

Der MegaView51 besitzt einen eingebauten “Infrarot Retourkanal”, mit dem das

angeschlossene Gerät von einem anderen Raum aus oder durch geschlossene

Schranktüren hindurch mit der eigenen Fernbedienung bedient werden kann.

Die Produkte Marmiteks werden mit großer Sorgfalt hergestellt und sind von hoher

Qualität. Lesen Sie diese Anleitung bitte sorgfältig durch und befolgen Sie die

Anweisungen, um die Möglichkeiten dieses Produkts optimal nutzen zu können.

10 © MARMITEK

2. VERPACKUNGSINHALT

MegaView50 MegaView51

1x Sender (Audio/Video Transmitter) 1x Sender (Audio/Video Transmitter)

1x Empfänger (Audio/Video Receiver) 1x Empfänger (Audio/Video Receiver)

1 x Gebrauchsanleitung 1x Infrarot-Empfänger

1 Infrarot Verlängerungskabel mit 2 LED

1 x Speisungsadapter

1 x Gebrauchsanleitung

3. ANFORDERUNGEN CAT5E KABEL

• UTP-, FTP- oder STP- Kabel

• 24AWG oder niedriger

• Solid Twisted Pair Kabel

• 100 Ohm bei 1MHz

• RJ-45 Anschluss gemäß der EIA/TIA T568B Norm

Anstatt eines CAT5 Kabels kann auch ein CAT6 Kabel verwendet werden (dieses ist

von besserer Qualität).

4. INSTALLATION

Zur Kontrolle der Betriebsfähigkeit des Systems empfehlen wir, die von Ihnen geplante

Aufstellung zunächst auszuprobieren. Schließen Sie dazu alles wie nachstehend

umschrieben an, kleben oder schrauben Sie die Komponenten jedoch noch nicht fest.

1. Schalten Sie, bevor Sie mit dem Anschließen beginnen, sämtliche A/V-Geräte aus.

2. Schließen Sie das A/V Gerät (beispielsweise Settop Box oder Media Center PC)

mithilfe eines Cinch-Kabels (nicht im Lieferumfang enthalten) an den Audio und

Video IN des MegaView50/51 Senders (Audio/Video Transmitter) [1] an.

AUDIO VIDEO

OUT

DVD PLAYER

VIDEO

AUDIO( R / L )

Transmitter

IRVerlängerungs-

kabel

AUDIO

VIDEO

INPUT

DISPLAY

VIDEO

AUDIO ( R / L )

IR WINDOW

IR Empfänger

IR OUT

GND

V+

IR Empfänger

Empfänger IREmpfänger

12VDC

POWER IN

Bis zu 300m mit Cat 5e Kabel

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Marmitek Extender Handbücher

Marmitek

Marmitek IR Eye Bedienungsanleitung

Marmitek

Marmitek GIGAVIEW 820 Bedienungsanleitung

Marmitek

Marmitek Powermid 300 XTRA Bedienungsanleitung

Marmitek

Marmitek MegaView61 Bedienungsanleitung

Marmitek

Marmitek Megaview60 Bedienungsanleitung

Marmitek

Marmitek 100304 Bedienungsanleitung

Marmitek

Marmitek IR CONTROL 8 Bedienungsanleitung

Marmitek

Marmitek Powermid XL PM10E Bedienungsanleitung

Marmitek

Marmitek IR Control 10 XTRA Bedienungsanleitung

Marmitek

Marmitek IR CONTROL PRO 8 Bedienungsanleitung

Marmitek

Marmitek IR 100 USB Bedienungsanleitung

Marmitek

Marmitek MegaView 60 Bedienungsanleitung

Marmitek

Marmitek IR 100 USB Bedienungsanleitung

Marmitek

Marmitek MegaView 251 Pro Bedienungsanleitung

Marmitek

Marmitek GIGAVIDEO 570 Bedienungsanleitung

Marmitek

Marmitek GigaView 911 UHD Bedienungsanleitung

Marmitek

Marmitek IR Control 10 Bedienungsanleitung

Marmitek

Marmitek POWERMID XL Bedienungsanleitung

Marmitek

Marmitek Invisible Control 6 XTRA Bedienungsanleitung

Marmitek

Marmitek Megaview 80 Bedienungsanleitung

Marmitek

Marmitek GIGAVIEW810 Bedienungsanleitung

Marmitek

Marmitek POWERMID XL Gebrauchsanweisung

Marmitek

Marmitek Powermid XS Bedienungsanleitung

Marmitek

Marmitek MegaView 65 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung