In order to prevent harm or injury to those using the appliance or to any other persons and/or property,
please be sure to read and save the following safety instructions.
Place on a solid weight bearing level surface out of the reach of children. Children and persons unfamiliar
with theequipment should only use it under supervision. Not observing these precautions may cause burns,
electric shock and other injury.
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
Children being supervised are not to play with the appliance. Not observing these precautions may cause
burns, electric shock and other injury.
Never place outside. This system is for indoor use only.
Never attempt to change the specification or modify systems in any way. Any attempt to do so may result
in fire or injury. If in need of assistance, please contact customer service or your local MARS DRINKS™
supplier.
Ensure access to the rear of the system can be achieved easily to allow isolation of the electrical and
water supply.
Under no circumstances should you attempt to perform any servicing or repairs on this system.
Inexperienced persons may cause injury or malfunction. Always call customer service or your local MARS
DRINKS™ supplier.
Do not immerse in water.
Only clean specified areas with appropriate materials as instructed.
Do not install where a water jet could be used.
Supervise if any children, aged or infirm persons are using the system.
Never use without placing a cup under the water outlet. Hot water may get caught in the lid and drip tray
causing burns.
Drain water tank. Keep upright for transportation and storage. All water must be drained from the equipment
if it is to be stored or transported where it could be subjected to temperatures of 0˚C or below. If the
equipment has been subjected to temperatures of 0˚C or below, then the brewer should be left at room
temperature for no less than 2 hours before powering on. Water freezing inside the brewer or running the
equipment with frozen water could cause damage to the machine causing leaks which could result in electric
shock.
An ambient temperature range of +41°F (5°C) to +86°F (30°C) is recommended for system location.
The system is flash tested before it leaves the manufacturing premises. Repeated flash testing could
damage insulation.
The A-weighted sound pressure level is below 70 dB
Never do anything that might cause damage to the cord or plug, (such as modify them, place hot or
heavy objects on them, bend them, stretch them, or twist them). If the appliance is used when damaged,
electrical short circuit or fire may result. If in need of repair please contact your local MARS DRINKS™
Customer Service Ocer.
Clean the plug from dust regularly using a clean cloth. A build-up of dust on the plug will attract
condensation, which could cause cable damage resulting in fire.
The appliance must be earthed. Failure to do so may result in electric shock.
Make sure the plug is correctly inserted in the power socket. An unsafe plug may cause electric shock or
generate heat resulting in fire.
Do not use a damaged power cord, mains plug or power socket. Failure to do so may result in electric
shock, injury or malfunction.
Power socket must not be used with other appliances. When used alongside other appliances, heat
generated may result in fire.
Never plug or unplug the appliance with wet hands. This may result in electric shock.
SAFETY AND INSTALLATION GUIDELINES
GENERAL USE
1
ELECTRICAL SUPPLY AND CORD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
