2
A wall-socket must be close to the product and readily accessible.
The overall system is protected against overload by the branch circuit
protection in accordance with the current edition of the NEC or CEC
Introduction
Specifications
Setup Instructions
Operating Instructions
Maintenance
Troubleshooting
The machine will not feed tape.
The ON/OFF switch is not illuminated.
The motor doesn’t run.
The machine doesn’t operate when a key is pushed.
The tape slips at the feed wheel.
The machine doesn’t stop feeding tape.
The cutter doesn’t cut the tape.
The tape is jamming or tearing.
The tape is cut, but the cutter blades don’t return to neutral position.
The tape is not the correct length.
The tape doesn’t stick to the carton.
The tape slips on the carton.
The heater doesn’t heat.
RepairRemoving the Right Side Cover
Attaching the Right Side Cover
Removing the Left Side Cover
Attaching the Left Side Cover
Removing the Timing Belt
Attaching the Timing Belt
Removing the Small Timing Pulley
Attaching the Small Timing Pulley
Removing the Large Timing Pulley
Attaching the Large Timing Pulley
Removing the Pinch Roller
Attaching the Pinch Roller
Removing the Weighted Brush Cover
Attaching the Weighted Brush Cover
Removing the Tape Channel Plate
Attaching the Tape Channel Plate
Removing the Tape Basket/Motor Cover
Attaching the Tape Basket/Motor Cover
4
5
6
9
12
14 14
15
15
17
17
18
18
19
19
19
20
20
21
22 23
23
25
25
27
27
28
28
29
29
30
30
33
33
35
35
37
37
Table of Contents
Marsh Shipping Supply Co., LLC. Collinsville, IL 62234 U.S.A. | Tel: 618.343.1006 | Fax: 618.343.1016 42901 09/21/2016
Need Parts? We have all parts on our
website with pictures and prices.
Visit:
http://www.propacksolutions.com/2100-
Electric_c_428.html
or call 877-776-7225 toll free.
