Marshall Amplification EFFECT PEDAL ED1 COMPRESSOR Bedienungsanleitung

ED-1 Compressor

Compressor Suggested Settings

Owners Manual

SMOOTH ‘BUCKER’ - Controlled strummy humbucker

(Amp: Clean)

KENTUCKY TWANGED CHICKEN - Single coil snap

(Amp: Clean)

LEG OVER JAZZ - Warm, comfortable feeling!

(Amp: Clean)

LEGATO LEAD - Controlled smooth overdrive

(Amp: O/D, but not too much gain)

Whilst the information contained herein is correct at the time of

publication, due to our policy of constant improvement and

development, Marshall Amplification plc reserve the right to alter

specifications without prior notice.

7 / 05

Marshall Amplification plc

Denbigh Road, Bletchley, Milton Keynes,

MK1 1DQ, England.

Tel : +44 (0)1908 375411 Fax : +44 (0)1908 376118

www.marshallamps.com

WARNING!

IMPORTANT Precautions

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

WARNING

Do not expose the apparatus to rain or moisture. Do not expose

the apparatus to dripping or splashing. No objects filled with

liquids should be placed on or near the apparatus. Do not use

this apparatus near water.

Clean only with dry cloth.

Changes or modifications not expressly approved by Marshall

Amplification plc could void the user’s authority to operate the

equipment.

Heed all warnings.

Follow all instructions.

Keep these instructions.

European Product Only

2367

From The Chairman

I would like to personally thank you

for selecting one of our effects pedals.

For over 40 years the Marshall name has been synonymous

with the greatest guitar tones in music. We have worked hand

in hand with guitarists from all levels throughout the world to

maintain and improve that special ingredient, ‘The Marshall

Sound.’

Our range of effects pedals gives the opportunity to augment

the classic Marshall tone to add Marshall character to a guitar

set-up.

All our pedals are made with the same utmost attention to

quality, in both materials and manufacture as our world

renowned amplifiers, cabinets and combos, in order to provide

you with optimum reliability and tone.

I would like to wish you every success with all of your musical

endeavours and also your new Marshall effects pedal, which I

am sure you will find a pleasure to play for many years to

come.

Yours Sincerely,

ENGLISH

Introduction

Compression is perhaps one of the most useful and versatile

effects available to any guitarist who is interested in improving

their tone.

The purpose of the Compressor pedal is primarily to allow you

to modify the sustain and attack of your guitar sound. Using

classic variable gain techniques the Compressor will provide

masses of clean sustain, which you can utilise whatever your

style. The Compressor pedal senses the level of the incoming

guitar signal and as the signal level decays the gain of the

internal circuitry is boosted to provide extra level and hence

sustain.

The attack control modifies the dynamic response of the guitar

signal (the effect of plucking a string) and allows you to

achieve a range of effects from rounded and mellow to

percussive and funky.

The Compressor also features an Emphasis control which

allows you to assign compression and target the frequencies

you want to compress. This means that you can, for example,

tighten up or compress your bass notes and let your treble

notes ring out.

The Compressor features a passive bypass for the main signal

path to ensure complete tonal integrity and has a quality of

tone matched only by its versatility.

Here follows a complete run down of The Compressor’s

features for your information. We have also enclosed a

number of suggested settings to help guide you. It should be

remembered though that these are only suggested settings

and you should really take the time to experiment.

Though the Marshall Compressor can produce traditional type

effects it is also ideally suited to the player who wants

something a little bit different. So take the time to explore the

sonic avenues opened to you by the Compressor, you won’t be

disappointed.

Features

1. Out Jack

This is the output of The Compressor and is for connection

to the amplifier or to another effects pedal.

Always use good quality shielded leads.

Always use 9V regulated DC supply with centre negative.

Although it may seem obvious the first action in achieving a

good effected sound (be it duration / compression etc.) is to

find the perfect bypassed sound. This will then allow the

correct level to be set with the effect unit to allow a cut or

boost in volume and a realistic tone.

On clean channels it is advisable to set the gain (or volume)

to a setting of no less than one quarter maximum so as not to

get unrealistic results due to any volume dependent tonal

shaping on the amplifier preamp.

As is inherent in circuits of this type the increase in gain at

low signal levels inevitably leads to unwanted extra noise as

the circuit gain is maximum when the signal level is

minimum. Many players overcome their problem with

discerning use of a swell pedal or simply utilising the bypass

footswitch during performance.

Setting Up

ENGLISH

2. Emphasis

The Compressor allows you to specify which end of the aural

spectrum you wish to compress. Select “Hi” if you would like

to emphasise the treble in your tone to get that real twang and

to compress the bass. This is useful for tight funky low note

riffs with stabbing bright chords. Turning toward ‘Lo’ gives

maximum treble compression and hence a ‘Lo’ emphasis.

3. Volume

Controls the volume of the pedal, allowing you to set the pedal

for a boost or a drop in volume when in operation, should you

so wish.

4. DC Input

For input of a 9V DC adaptor (as previously described) should

you not wish to use batteries.

5. LED

Indicates when The Compressor is in operation.

6. Attack

This dictates how quickly compression comes in after pick

attack. With this set at minimum you will get a rounder more

spongy tone. As you increase the Attack the sound will get

sharper and more metallic, which is ideally suited for funky

styles.

7. Compression

This adjusts the amount of compression. The more you add

compression, the more you iron out the peaks and troughs in

your sound. This increases the amount of sustain and makes

for a smoother guitar tone.

8. In Jack

This is the input jack, for connection to your guitar or to

another effects pedal.

9. Foot Switch

For switching The Compressor on and off.

WHAT IF

OUTPUT

SOUND TOO

TREBLY OR

FIZZY

UNUSUAL

HUM

BASS

FEEDBACK

SOUND TOO

MUSHY OR

BASSY

UNUSUAL

FEEDBACK

INDICATOR

LED NOT

NOISE IN

BYPASS

CHECK

BATTERY

CHECK

LEADS

CHECK PEDAL

CONTROLS

DC INLET

CHECK AMP

CONTROLS

CHECK GUITAR

REDUCE

TREBLE

REDUCE

TREBLE

INPUT

LEAD

Trouble Shooting

3333

333

MOVE AWAY

FROM AMP

PICKUPS

MAY BE

VIBRATING

ESPAÑOL

Battery Replacement

1. To replace the battery, open

the easily accessed coin

screw battery cover plate by

loosening screw as shown,

then disconnect the battery

connector lead.

2. Use PP3 or equivalent

battery (for improved

battery life use alkaline

type)

3. Always ensure that the

battery is removed when the

pedal is not in use for long

periods.

4. Dispose of old battery

in a safe place.

Technical Specification

Power: 9V DC Centre Negative Regulated

Current Draw: 5mA

Controls: Emphasis Mode Select, Volume, Attack,

Compression

Switches: On/Off Switch

Indicators: On/Off LED

Jacks: Input/Output ‘Jacksockets’

Input Impedance: > 1MΩ

Output Load Impedance: < 20kΩ

Dimensions: 120mm x 65mm x 55mm

Weight: 510 grammes

Unas palabras

del Presidente

Quiero agradecerte personalmente el haber elegido uno de

nuestros pedales de efectos.

Desde hace más de 40 años el nombre de Marshall es

sinónimo del mejor sonido de guitarra. Hemos trabajado mano

a mano con guitarristas de todos los niveles y de todas partes

del mundo para mantener y mejorar este ingrediente especial:

“El sonido Marshall”.

Nuestra gama de pedales de efectos te da la oportunidad de

aumentar el clásico tono de Marshall o añadir personalidad a

cualquier equipo de guitarra. Están fabricados prestando tanta

atención a la calidad de los materiales como el resto de la

gama de amplificadores y combos Marshall, para ofrecerte

gran fiabilidad y tono.

Quiero desearte grandes éxitos en todas tus empresas

musicales y con tu nuevo pedal de efectos Marshall, que estoy

seguro te resultará un placer utilizar durante muchos años.

Sinceramente,

Inhaltsverzeichnis

Andere Marshall Amplification Musikpedal Handbücher

Marshall Amplification

Marshall Amplification EFFECT PEDAL EH-1 ECHOHEAD Bedienungsanleitung

Marshall Amplification

Marshall Amplification EFFECT PEDAL RG-1 REGENERATOR Bedienungsanleitung

Marshall Amplification

Marshall Amplification EFFECT PEDAL SV-1 SUPERVIBE Bedienungsanleitung

Marshall Amplification

Marshall Amplification JH-1 Bedienungsanleitung

Marshall Amplification

Marshall Amplification GUV'NOR Bedienungsanleitung

Marshall Amplification

Marshall Amplification EFFECT PEDAL RF-1 REFLECTOR Bedienungsanleitung

Marshall Amplification

Marshall Amplification JH-1 Bedienungsanleitung

Marshall Amplification

Marshall Amplification SHREDMASTER Bedienungsanleitung

Marshall Amplification

Marshall Amplification DRIVEMASTER Bedienungsanleitung

Marshall Amplification

Marshall Amplification EFFECT PEDAL BB2 Bedienungsanleitung

Marshall Amplification

Marshall Amplification Bluesbreaker Bedienungsanleitung

Marshall Amplification

Marshall Amplification GV-2 Guv’nor Plus Bedienungsanleitung

Marshall Amplification

Marshall Amplification EFFECT PEDAL VT-1 VIBRATREM Bedienungsanleitung

Marshall Amplification

Marshall Amplification EFFECT PEDAL VT-1 VIBRATREM Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung