Marshall Amplification ORIGIN 5 COMBO Bedienungsanleitung

ORIGIN 5

COMBO

USER MANUAL

CONGRATULATIONS ON

PURCHASING YOUR MARSHALL

ORIGIN AMPLIFIER.

ENGLISH

THE ORIGIN PROVIDES USEFUL MODERN FEATURES INCLUDING: TILT TONE

CONTROL, TO BLEND BETWEEN TWO DISTINCTLY DIFFERENT VOICES,

AND POWER STAGING, MAKING IT ADAPTABLE TO A VARIETY OF PLAYING

ENVIRONMENTS.

WE HOPE YOU ENJOY YOUR NEW AMPLIFIER AS MUCH AS WE HAVE

ENJOYED DESIGNING AND BUILDING IT FOR YOU.

THE MARSHALL TEAM

IMPORTANT SET UP INFORMATION:

1. Ensure that the power switch is set

to the off position (front panel

function 3.9).

2. Connect the supplied mains (power)

lead into the mains input on the rear

panel rst (rear panel function 4.1) and

then into an electricity outlet.

3. Ensure that the volume controls on the

front panel are set to zero.

4. Plug your guitar into the input jack

socket (front panel function 3.1).

5. Select either high or low power (front

panel function 3.8).

6. Turn the front panel power switch on

(front panel function 3.9) and wait a

couple of minutes.

7. Turn the volume up to your preferred

level and your amplier is ready to play.

Warning: Before going any further, make

sure that your amplier is compatible

with your mains electricity supply. If you

have any doubt, please seek help from a

qualied technician – your Marshall dealer

can help you with this.

MAINS INPUT & FUSE:

The specic mains input voltage

rating that your amplier has been

manufactured for is indicated on the rear

panel of the amplier. Your amplier is

provided with a detachable mains (power)

lead, which should be connected to the

mains input socket on the rear panel of the

amplier. The correct value and type of

mains fuse is specied on the rear panel.

Never attempt to bypass the fuse or t

one of the incorrect value or type.

TRANSPORTING YOUR EQUIPMENT:

Please ensure that your amplier is

switched off, unplugged from the mains

electricity supply and all removable

cables have been disconnected from your

equipment before attempting to move it.

1.0

WARNING! SAFETY INSTRUCTIONS

PLEASE READ THIS MANUAL CAREFULLY BEFORE PLUGGING IN. FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.

Your Origin 5 combo amplier has

been designed to offer the perfect

solution for players looking to create

great music.

The tone of the Origin 5 combo amplier

is unmistakeably Marshall using 2x ECC83

preamp valves and 1x EL84 power valve to

generate rich harmonics and exceptional

tone. While the amplier itself is a single

channel unit, the design of the tone circuit

means it offers two very distinctive voices.

Accessing your preferred sound can be

easily achieved using the inbuilt tilt control

which when turned fully counter clockwise

will access a subtler tonal structure.

Dialling the tilt control fully clockwise will

increase the brightness of sound for a more

cutting tone.

Additional functionality such as foot-

switchable gain boost, effects loop, and

ability to run the amplier in high or low

power modes, make the Origin 5 an

exceptional amplier for the modern

player.

VALVES

2x ECC83 + 1x EL84

SPEAKER

Celestion Eight-15 8”

POWER CONTROL

2 way switchable

High and low

TILT CONTROL

Single channel control

Adjust between normal and high treble

EQUALISATION

Treble, middle and bass

FOOTSWITCHABLE FEATURES

Effects loop

Gain boost

2.0

OVERVIEW AND SPECIFICATION

1. INPUT

Connect to your guitar using a ¼”

instrument cable.

2. VOLUME

Control the output volume and gain of your

amplier. Pull this knob to engage the gain

boost feature. This control can be operated

using a 2-way foot switch (PEDL-90016).

Note: when a foot switch is connected

to the amplier it will override the front

panel control meaning the gain boost can

only be turned on and off using the foot

switch.

EQ Settings: your Origin amplier has

3 equalisation controls (bass, middle and

treble) plus an amplier channel voice

control (tilt). All these controls allow you

to adjust the frequency response of your

amplier and the voicing to adjust how

it sounds. When adjusting to your sound

familiarise yourself with how each of

these controls affects your overall tone to

get the most from your amplier.

3. TILT

Your Origin amplier has a tilt control to

add more exibility to your EQ.

Tilt: the tilt control adjusts your EQ to add

more exibility to your amplier’s sound.

This control is independent of the main

EQ providing a highly effective lter that

can change the voice of your amplier

from a traditional normal Marshall tone

to a vintage high treble voice. Dialled all

the way to the left the sound is warm and

full providing a thick overall tone. When

dialled all the way to the right the overall

tone is brighter for players looking for

more cut through and bite.

3.0

FRONT PANEL FUNCTIONS

ENGLISH

VOLUME

INPUT TREBLEMIDDLEBASSTILT

PULL BOOST EQUALISATION

POWEROUTPUT

HIGH ON

LOWOFF

1 2 3 45 6 7 8 9

4. BASS

Controls the lower frequency of your

sound.

5. MIDDLE

Controls the middle frequency of your

sound.

6. TREBLE

Controls the higher frequency of your

sound.

7. POWER LIGHT

When the unit is switched on this light

will illuminate.

8. OUTPUT LEVEL

Adjust the output power level from low to

high using this switch.

Note: reducing the power output allows

you to drive the power stage harder at

low volumes. This provides the ability to

benet from the rich tonal qualities that a

valve power amp can create without the

need to operate at loud volume levels.

9. POWER SWITCH

Turn your amplier on and off using this

switch.

3.0

FRONT PANEL FUNCTIONS CONTINUED

ENGLISH

VOLUME

INPUT TREBLEMIDDLEBASSTILT

PULL BOOST EQUALISATION

POWEROUTPUT

HIGH ON

LOWOFF

1 2 3 45 6 7 8 9

1. MAINS INLET

Connect your amplier to the supplied

mains lead using this socket.

2. 16 OHM OUTPUT

Your Celestion Eight-15 speaker is

connected here.

Note: always ensure before connecting

and disconnecting speaker loads from

your Origin that it is switched off rst.

3. EFFECTS LOOP RETURN

Return your signal from your effects or

outboard processor here.

4. EFFECTS LOOP SEND

Send your signal to your effects or

outboard processor from this socket.

5. FOOT SWITCH

Connect a 2-way foot switch

(PEDL-90016) to this socket to control

the gain boost function and turn the effects

loop on and off.

4.0

REAR PANEL FUNCTIONS

ENGLISH

345 1

WHILST THE INFORMATION CONTAINED HEREIN IS CORRECT AT THE TIME

OF PUBLICATION, DUE TO ITS POLICY OF CONSTANT IMPROVEMENT AND

DEVELOPMENT, MARSHALL AMPLIFICATION PLC RESERVES THE RIGHT TO

ALTER SPECIFICATIONS WITHOUT PRIOR NOTICE.

MARSHALL AMPLIFICATION PLC,

DENBIGH ROAD,

BLETCHLEY, MILTON KEYNES,

MK1 1DQ, ENGLAND.

T: +44 (0) 1908 375411

F: +44 (0) 1908 376118

MARSHALL AMPLIFICATION PLC

REGISTERED IN ENGLAND

REGISTERED NUMBER: 805676

BOOK-91018-V.01-20 NOVEMBER 2017

Inhaltsverzeichnis

Andere Marshall Amplification Verstärker für Musikinstrumente Handbücher

Marshall Amplification

Marshall Amplification DBS 7200 Bedienungsanleitung

Marshall Amplification

Marshall Amplification JTM60 Bedienungsanleitung

Marshall Amplification

Marshall Amplification Valvestate 2000 AVT series Bedienungsanleitung

Marshall Amplification

Marshall Amplification 1960A Bedienungsanleitung

Marshall Amplification

Marshall Amplification Silver Jubilee Series JCM 25 Bedienungsanleitung

Marshall Amplification

Marshall Amplification MG100DFX Bedienungsanleitung

Marshall Amplification

Marshall Amplification JVM410HJS Joe Satriani Bedienungsanleitung

Marshall Amplification

Marshall Amplification Valvestate 8100 Bedienungsanleitung

Marshall Amplification

Marshall Amplification DSL40CR Bedienungsanleitung

Marshall Amplification

Marshall Amplification MG15CFX Bedienungsanleitung

Marshall Amplification

Marshall Amplification JCM 2000 TSL 60 Bedienungsanleitung

Marshall Amplification

Marshall Amplification JCM600 Bedienungsanleitung

Marshall Amplification

Marshall Amplification JTM series Bedienungsanleitung

Marshall Amplification

Marshall Amplification JCM-1H Bedienungsanleitung

Marshall Amplification

Marshall Amplification Acoustic Soloist AS80R Bedienungsanleitung

Marshall Amplification

Marshall Amplification JVM205C Bedienungsanleitung

Marshall Amplification

Marshall Amplification MF350 Bedienungsanleitung

Marshall Amplification

Marshall Amplification Class 5 H Valve Amplifier Bedienungsanleitung

Marshall Amplification

Marshall Amplification MG100FX Bedienungsanleitung

Marshall Amplification

Marshall Amplification G30RCD Bedienungsanleitung

Marshall Amplification

Marshall Amplification Astoria Dual AST3C Bedienungsanleitung

Marshall Amplification

Marshall Amplification ValveState Bedienungsanleitung

Marshall Amplification

Marshall Amplification Super 100JH Bedienungsanleitung

Marshall Amplification

Marshall Amplification Valvestate VS230R Bedienungsanleitung

Beliebte Verstärker für Musikinstrumente Handbücher anderer Marken

Peavey

Peavey Wiggy Bedienungsanleitung

acus

acus One Forstreet 10 Bedienungsanleitung

Pyle Pro

Pyle Pro PPG860A Bedienungsanleitung

Laney

Laney BC30 Bedienungsanleitung

Vox

Vox Pathfinder 15SMR Bedienungsanleitung

Crate

Crate Professional BV-120H Bedienungsanleitung

Peavey

Peavey Basic 60 Bedienungsanleitung

Fender

Fender Bassman 1200 Bedienungsanleitung

ZT Club Bedienungsanleitung

Ibanez

Ibanez IFS2X Bedienungsanleitung

Crate

Crate GLX1200H Bedienungsanleitung

Laboga

Laboga THE BEAST Bedienungsanleitung

Falken1

Falken1 Traveller Pro Bedienungsanleitung

Hughes & Kettner

Hughes & Kettner Bass Kick 303 Bedienungsanleitung

Yamaha

Yamaha GA-10 Bedienungsanleitung

Engl

Engl Powerball-2 Service-Handbuch

Gibson

Gibson GA5WTR Kurzanleitung

Engl

Engl Powerball-2 Bedienungsanleitung