Martin Mania PR1 Bedienungsanleitung

Mania PR1

user manual

Measurements are expressed in millimeters.

340

158

315

290

Ø13

without permission in writing from Martin Professional A/S, Denmark.

Printed in China.

P/N 35000148, Rev. B.

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Mania PR1 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

AC power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Overhead mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing a gobo/texture glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installing a color filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Focusing the Mania PR1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Gobo rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Remote control operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Lamp maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Reconfiguring the beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Lens assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Replacing the mains fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4 Mania PR1 user manual

Introduction 5

NTRODUCTION

Thank you for selecting a Martin Mania PR1. The Mania PR1 is a gobo

projector with a motorized rotating gobo. Gobo rotation speed and

direction can be adjusted, and a remote control is supplied with the

product. The beam angle can be adjusted from 25° to 32°. A 43° beam

angle can also be obtained using a separately available accessory.

SAFETY INFORMATION

Warning! This product is not for household use. It presents risks of

lethal or severe injury due to fire and heat, electric shock, and

falls.

Read this manual before powering or installing the fixture, follow the

safety precautions listed below and observe all warnings in this manual

and printed on the fixture. If you have questions about how to operate the

fixture safely, please contact a Martin distributor for assistance. Refer any

service operation not described in this manual to a qualified technician.

Do not modify the fixture or install other than genuine Martin accessories

and upgrade kits.

Refer servicing to qualified personnel.

Maximum ambient temperature Ta= 40°C(104°F).

See serial label for replacement fuse size and lamp type.

Suitable for mounting on normally flammable surfaces.

Do not look directly into the light.

Risk of fire, electrical shock and burns.

Use only in dry locations.

For indoors use only.

Do NOT block exhaust vents.

6 Mania PR1 user manual

Shields, lenses or ultraviolet screens must be changed if they become

visibly damaged to the extent that their effectiveness is impaired, for

example, by cracks or deep scratches.

The lamp must be changed if it becomes damaged or thermally deformed.

If the external power cord of this luminaire is damaged, it must be

replaced by a special cord exclusively available from your Martin dealer.

Avoiding electric shocks

Warning Always disconnect from mains power before replacing the

lamp, fuses, or any part, and when not in use.

• Before operation ensure that factory setting of voltage and frequency

match local power supply.

• Always ground (earth) the fixture electrically.

• Use only a source of AC power that complies with local building and

electrical codes and has both overload and ground-fault protection.

• Do not expose the fixture to rain or moisture.

• Never operate the fixture with missing or damaged lenses and/or covers.

Protecting yourself and others from burns and fire

Warning Hot lamp. The exterior of the fixture can become hot. Allow to

cool for at least 20 minutes before handling or opening.

• Surface temperature under steady state condition = 95°C (203° F).

• Minimum distance to flammable material = 0.3 m (1 ft).

• Minimum distance to illuminated surface 1.0 m (3.3 ft).

• Never attempt to bypass the thermostatic switch or fuses. Always replace

defective fuses with ones of the specified type and rating.

• Ensure that the air flow through vents is free and unobstructed.

• Provide a minimum clearance of 0.1 meters (4 inches) around air vents.

• Never place filters or other materials over the lens or in the optical path.

• The exterior of the fixture can become hot. Allow the fixture to cool for at

least 20 minutes before handling.

• Do not operate the fixture if the ambient temperature (Ta) exceeds 40° C

(104° F).

• Do not stare directly into the light.

• Never operate the fixture without all lenses and covers installed: an

unshielded lamp emits dangerous UV radiation that can cause burns and

eye damage.

Introduction 7

Preventing injuries due to falls

• When suspending the fixture above ground level, verify that the structure

can hold at least 10 times the weight of all installed devices.

• Verify that all external covers and rigging hardware are securely fastened

and use an approved means of secondary attachment such as a safety

cable.

• Block access below the work area whenever installing or removing the

fixture.

UNPACKING

The packing material is carefully designed to protect the fixture during

shipment - always use it to transport the fixture.

The Mania PR1 is packaged with the following:

• 3-wire power cable

• User manual

• Blue-hued texture glass

• Steel gobo with Martin logo

• Remote control unit with 5-metre (16.4 ft) RJ-45 cable

• White glove with Martin logo

8 Mania PR1 user manual

MANIA PR1 OVERVIEW

Cooling vent

Safety cable attachment eye

AC supply setting

Mains switch

Mains socket

Fuse holder

Cooling fan

Thumb screw (cover lock)

Gobo rotation direction switch

Remote control input

Gobo rotation speed

Remote control output

Installation 9

NSTALLATION

AC POWER

Before operation, ensure that factory setting of voltage and frequency

match local power supply.

Always ground (earth) the fixture electrically.

Use only a source of AC power that complies with local building and

electrical codes and has both overload and ground-fault protection.

Note: If the external power cord of this luminaire is damaged, it

must be replaced by a special cord exclusively available from

your Martin dealer.

Configuring for local mains power

The Mania PR1 has a switch-selectable power supply that can operate in

the following voltage ranges at 50-60 Hz:

• 115 - 120 volts (setting 115)

• 220 - 240 volts (setting 230)

Warning Do not operate the fixture on a power supply that falls outside

of these ranges.

Select the operating range using the red AC supply switch at the rear of

the fixture.

AC supply setting

10 Mania PR1 user manual

Installing a plug on the mains lead

Warning! For protection from dangerous electric shock, the fixture must

be grounded (earthed). The AC mains supply must have

overload and ground-fault protection.

Important! Verify that the feed cables are undamaged and rated for the

current requirements of all connected devices before use.

The fixture’s mains lead may require a grounding-type cord cap that fits

your power distribution cable or outlet. Consult a qualified electrician if you

have any doubts about proper installation.

Following the cord cap manufacturer’s instructions, connect the

appropriate wires to ground (earth), live, and neutral. The following table

shows some common wire identification schemes.

To apply power:

1 Connect the mains power cable.

2 Turn the power on using the mains switch.

OVERHEAD MOUNTING

The Mania PR1 is designed to be hung overhead with a clamp (not

included).

Function Wire (EU) Wire (US)

live brown black

neutral blue white

ground yellow/green green

Mains socket

Mains switch

Andere Handbücher für Mania PR1

Inhaltsverzeichnis

Andere Martin Beleuchtungsausrüstung Handbücher

Martin

Martin LIGHTING DIRECTOR Bedienungsanleitung

Martin

Martin RoboScan Pro 918 Bedienungsanleitung

Martin

Martin MAC Aura Bedienungsanleitung

Martin

Martin MAC 301 Wash Bedienungsanleitung

Martin

Martin FiberSource QFX 150 Bedienungsanleitung

Martin

Martin MAC 575 Krypton Bedienungsanleitung

Martin

Martin Wheeler Bedienungsanleitung

Martin

Martin MAC 350 Entour Bedienungsanleitung

Martin

Martin Extube Bedienungsanleitung

Martin

Martin MAC 700 PROFILE Bedienungsanleitung

Martin

Martin MAC 250+ Bedienungsanleitung

Martin

Martin Exterior 200 LED Bedienungsanleitung

Martin

Martin Xciter Bedienungsanleitung

Martin

Martin MAC 101 Series Bedienungsanleitung

Martin

Martin VDO Atomic Dot Bedienungsanleitung

Martin

Martin Alien LED Downlight Bedienungsanleitung

Martin

Martin EvenLED RGB LED Panel Bedienungsanleitung

Martin

Martin RoboColor III Bedienungsanleitung

Martin

Martin VC-Feeder Bedienungsanleitung

Martin

Martin MAC 250 Wash Bedienungsanleitung

Martin

Martin Magic Moon Bedienungsanleitung

Martin

Martin EFX500 Bedienungsanleitung

Martin

Martin Xciter Bedienungsanleitung

Martin

Martin PAL 1200 FX Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung