Martin DT2H Bedienungsanleitung

Installation Manual

M3699UK

MARTIN® DT2H -

Main Scraper

Contents

I Contents

I Contents ............................................................................ 1

1 Introduction ...................................................................... 3

1.1 About this Installation Manual ............................................ 3

1.1.1 Scope ............................................................................ 3

1.1.2 Copyright ....................................................................... 3

1.1.3 Disclaimer ...................................................................... 3

1.1.4 Reference to additional documentation ......................... 4

1.1.5 Classification of hazards................................................ 5

1.2 Appropriate Use ................................................................. 6

1.2.1 Conveyor belt systems with open transfer systems ...... 6

1.2.2 Use in EX-protection areas ............................................ 6

1.2.3 Operating limits of this product ...................................... 6

1.3 Safety at work .................................................................... 7

1.3.1 Safety instructions, safety at work ................................. 7

1.3.2 Obligations of the operator ............................................ 7

1.3.3 Authorised personnel ..................................................... 7

2 Description of the product .............................................. 9

2.1 Contruction and Function ................................................... 9

2.2 Spring tensioners ............................................................. 10

2.3 Type explanation.............................................................. 10

3 Installation preparation ................................................... 3

3.1 Before installation............................................................... 3

3.1.1 Materials and tools required .......................................... 3

3.1.2 Preparatory measures ................................................... 3

4 Installation ........................................................................ 5

4.1 Safety instructions.............................................................. 5

4.2 Installation of the MARTIN® D2H main scraper................. 6

4.2.1 Determining the installation position .............................. 6

4.2.2 Installation of the spring tensioner................................. 8

4.2.3 Installing the scraper ..................................................... 9

4.2.4 Centre the scraper shaft below the conveyor belt ....... 12

4.2.5 Adjust the blade shaft parallel to the conveyor belt ..... 13

4.2.6 Levelling the blade shaft .............................................. 13

4.2.7 Tensioning the blade ................................................... 15

4.3 Test run ............................................................................ 19

4.4 Installations - Check-list ................................................... 21

4.5 Placing the warning label or the warning pendant ........... 22

5 Maintenance ................................................................... 23

5.1 Safety instructions............................................................ 23

5.2 Weekly maintenance........................................................ 23

5.3 Replacing the scraper blades........................................... 26

6 Troubleshooting ............................................................. 29

6.1 Safety instructions............................................................ 29

6.2 Troubleshooting .............................................................. 29

7 Storage, De-installation, Disposal ................................ 31

7.1 Storage............................................................................. 31

Contents

7.2 De-installation ................................................................... 31

7.3 Disposal ............................................................................ 31

8 Part numbers ...................................................................33

8.1 MARTIN®DT2H main scraper .......................................... 33

8.2 MARTIN® DT2H tensioners.............................................. 33

8.3 MARTIN® DT2H main scraper blade cartridge................. 33

8.4 MARTIN®Inspection Doors .............................................. 34

8.5 Installation manual............................................................ 34

8.6 Miscellaneous ................................................................... 34

8.7 Warning label / Warning tag.............................................. 34

8.8 MARTIN®DT2H main scraper .......................................... 35

8.9 MARTIN®IN-LINE spring tensioner.................................. 39

8.10 MARTIN®IN-LINE air tensioner........................................ 41

8.11 DURT TRACKER®Scraper blades.................................. 42

8.12 Part number - description.................................................. 43

9 Declaration of Incorporation ..........................................45

10 Notice ...............................................................................47

Introduction

1 Introduction

1.1 About this Installation Manual

Non-compliance with this installation manual can lead to the loss of

any liability claim and/or guarantee.

1.1.1 Scope

This installation manual is exclusively for the product that is de-

scribed herein, and is aimed at those people, that install the product,

take the product into operation, and monitor its use.

1.1.2 Copyright

The product described and this installation manual are protected by

rights to this document are reserved, including the reproduction and/

or distribution in any thinkable way or form. The reprinting of this

document is only allowed with written permission from Martin Engi-

neering.

The technical standard at the time of delivery of the product and

technical documentation is decisive, as long as no other information

is given. We reserved the right to make technical changes without

any announcement. Earlier documents will no longer be valid. Martin

Engineering General Conditions of Sale and Delivery apply.

1.1.3 Disclaimer

Martin Engineering guarantees the faultless operation of the product

according to the advertising, edited product information, and techni-

cal documentation. Martin Engineering does not accept any liability

for the efficiency and proper operation, if this product is used for any

other purpose, other than as described in the section "Appropriate

Use"; or for any damage caused by the use of accessories and/or

spare parts, that were not delivered and/or certified by Martin Engi-

neering.

The products from Martin Engineering are designed for a long ser-

vice life. They correspond to state-of-the-art scientific and technolo-

gy standards and were thoroughly inspected before delivery.

Additionally, Martin Engineering carries out continuous product and

market research for the further development of products.

In the event of faults and/or technical problems Martin Engineering

offers professional support. Appropriate steps will be taken immedi-

ately. Martin Engineering's warranty conditions apply, which can be

sent if required.

Introduction

1.1.4 Reference to additional documentation

The following documents are referred to in this installation manual:

•MARTIN

®Inspection door M3127

The following standards and guidelines were applied when compos-

ing this installation manual:

• EU Machinery Directive (2006 / 42 / EG)

• ISO/IEC Guide 37 "Installation instructions for end-

consumer used products“, edition 1995

• DIN 1421 "Structure and numbering in texts", edition 1983-

• DIN/EN 12100-1 "Safety of machinery - Basic concepts,

general principles of design", edition 2013-08

• DIN/ISO 16016 "Technical product documentation -

Protection notices for restricting the use of documents and

products", edition 2007-12

• DIN/EN 60204-1 "Safety of machinery - Electrical

equipment of machines, Part 1, General requirements",

edition 2007-06

• DIN EN 82079-1 Preparation of instructions for use -

Structuring, content and presentation - Part 1: General

principles and detailed requirements.

Introduction

1.1.5 Classification of hazards

DANGER!

This indicates an imminent danger that leads to serious physical

injuries or death, if not avoided.

WARNING!

This indicates a potentially dangerous situation that could lead to

serious physical injuries or death, if not avoided.

CAUTION!

This indicates a potentially dangerous situation that could lead to

minor physical injuries and/or damage to property, if not avoided.

NOTE

Contains information to the installation or use of the product and

points to situations, that cause neither injuries nor property dam-

age, but is nevertheless important information.

Introduction

1.2 Appropriate Use

The Martin®DT2H main scraper can be used only for cleaning a

conveyor belt in the lower section of a conveyor belt system. In do-

ing so, the scraper must be installed immediately behind a head

drum or counter pressure roller.

It can be used in conveyor belts having a maximum belt width of

3,000 mm and maximum conveyor speed of 6.1 m/sec.

Any other use of this product is deemed to be inappropriate. If you

would like to use the product described here for any other purpose,

please contact customer service at Martin Engineering. We shall be

pleased to assist you with the product configuration.

1.2.1 Conveyor belt systems with open transfer systems

This installation manual describes the installation on a conveyor belt

system with an encapsulated delivery system. For the installation on

open delivery systems different MARTIN®installation consoles can

be used.

If installation conditions prove to be difficult, as is the case with im-

passable static components, or using the head drum as the tension

point, Martin Engineering or a representative can help with the posi-

tioning or find customized solutions.

1.2.2 Use in EX-protection areas

Under certain circumstances the product described here can also be

used in potentially explosive areas. Contact Martin Engineering for

more information on use in potentially explosive areas.

The use of the scraper in a device protection category that is higher

than that specified or under operating conditions other than those

specified by Martin Engineering is not permissible or may be done

only if Martin Engineering has granted its approval.

1.2.3 Operating limits of this product

The use of the product mentioned here is allowed only within the

specifications given above. Using it in a higher than specified equip-

ment category or under operating conditions other than those

named and previously specified by Martin Engineering is considered

to be inappropriate use and can only be carried out if approved by

Martin Engineering.

If the MARTIN®D2H main scraper needs to be used for a different

purpose, then Martin Engineering or one of its representatives can

help with the product configuration.

Introduction

1.3 Safety at work

1.3.1 Safety instructions, safety at work

This installation manual should be read through completely before

beginning work on the product or the customer's conveyor belt sys-

tem.

The operator must ensure that all installation, inspection or mainte-

nance work is carried out only by authorised experts.

Basically, all work on conveyor belt systems and their accessories

has to be done when the system is at a standstill. The instructions in

the relevant installation manual, which describes how to shut-down

the conveyor belt, must be adhered to.

Upon completion of work, all safety equipment and protective

guards should be reinstalled and put back into operation.

Before commissioning, the installation should be completed. Before

the conveyor belt system can be used again, the flawless execution

of all steps should be checked. All notes on installation and commis-

sioning of the product should be observed.

1.3.2 Obligations of the operator

The operator of this product must ensure that only those personnel

install, service and use this product who

• know the rules for safety and accident prevention,

• have been instructed in this product’s use, and have read

and understood this installation manual.

1.3.3 Authorised personnel

Personnel are considered to be authorised, if they have appropriate

education, technical experience as well as knowledge on the rele-

vant standards and guidelines and are also in a position to assess

any tasks to identify critical situations at an early stage.

Operating or maintenance and installation personnel

Personnel are considered to be authorised, if they have been in-

structed in the use of the product and have read the installation man-

ual completely and understood it.

Introduction

Inhaltsverzeichnis

Andere Martin Elektrowerkzeuge Handbücher

Martin

Martin M3910 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch