MARTINDALE F Bedienungsanleitung
1375 Hird Ave., Cleveland, OH 44107 • Phone (216) 521-8567 • Fax Local 521-9476 / USA & Canada (800) 344-919
MODEL F BLOWER
INSTRUCTIONS
OPERATION:
To use as blower, attach the tapered nozzle to the discharge opening of the blow-
er, and the protective screen lock to the air intake opening.
To use as a suction cleaner, attach the dust bag to the air discharge opening.
Remove the protective screen lock from the air intake opening and attach the
swivel end of the hose by turning the swivel untill it is secure. Attach the desired
nozzle to the other end of the hose.
MAINTENANCE:
The carbon brushes should be checked periodically and replaced when worn
down to approximately 3/8” long. To check the brushes, unscrew the screws hold-
ing the brush cap guard. Unscrew the brush cap and remove the brushes. Be
sure to note position of the brushes when they are being removed so that if they
are still of sufficient length they can be reassembled in the same position.
The bearings are prelubricated and sealed and do not require further lubrication.
1375 Hird Ave., Cleveland, OH 44107 • Phone (216) 521-8567 • Fax Local 521-9476 / USA & Canada (800) 344-919
PART NO. DESCRIPTION
2206 Cover, Aluminum
2663 Bearing, Ball
2681 Washer, Split; for Bearing Cover
2700 Washer, Felt; for Cover
2579 F10 Armature, 115V., Without Bearing
2580 F10 Armature, 115V. With Bearing
2581 Coil, Field, 115V., Complete
2969 Brush & Spring, Carbon
2579 F10 Armature, 230V.; Without Bearing
2580 F10 Armature, 230V.; With Bearing
2581 F10 Coil, Field, 230V, Complete
2875 Holder, Brush, Carbon; With Bushings
2842 Cap, Brush
2411 P Housing, Motor, Aluminum; With Brush Holders
3342 Guard, Cap, Brush
3347 Switchbox, Aluminum; only
3347 A Switchbox Assembly
3370 Plate, On-Off; for Switchbox
3380 Switch
3404 Grommet, Rubber, 3/8” Hole
3417 Cable, Conductor, #18/3, 20”; with Plug
3860 Fan, Impeller, Aluminum
3920-1 Gasket, Rubber; for Screenlock & Nozzle
4640 Chamber, Fan
4762 Screenlock; with Gasket
4762 Screenlock
4960-1 Handle, Aluminum; Complete
5764 W Screw, 10/24 x 7/16”; for Handle
5807 Screw, 8/32 x 3/8”; to Hold Housing & Guard to Switchbox
5811 Screw, 8/32 x 2”; to Hold Field Coil
5985 Screw, 8/32 x 1/2”, Flat Head; for Cover
5981 Nut, 8/32, Hex; for Cord Clip
6020 Screw, 10/24 x 3/8”, Set; for Fan Cover
6800 Nozzle, Blower, Plastic
9417 Bushing
5114 Washer,Lock, Shakeproof; to hold Coil & Wire
MODEL F GENERAL-DUTY BLOWER
PARTS LIST
Inhaltsverzeichnis
Andere MARTINDALE Gebläse Handbücher
