Marvel 80RF-BB-F Handbuch

Installation

Operation

and

Maintenance

Instructions

Refrigerator / Freezer Models

61RF

80RF

MARVEL

TABLE OF CONTENTS

Unpacking your refrigerator........................

.........

..2

Removing the packaging......................

............

..2

Warranty Registration.....................

.................

....2

Installing your refrigerator........................

..........

..3

Selecting the location..........................

.............

..3

Cabinet Clearances..................................

.........

Leveling legs......................................

.............

...3

Grounding method..............................

...

...........

Electrical Requirements........................

...........

....3

Using Your Refrigerator..................................

.......

Setting the temperature control..............

...........

...4

Defrosting instructions........

....

.............

..............

..4

Dimensions For Models 61RF Solid Door............

.. 5

Recommended Rough in Opening Dimensions

For Models 61RF Solid Door................................ 5

Dimensions For Model 61RF Solid Overlay Door

....

Recommended Rough in Opening Dimensions

For Model 61RF Solid Overlay Door.

...................

Dimensions For Model 80RF Solid Door...............

..7

Recommended Rough in Opening Dimensions

For Model 80RF Solid Door..

.................

............

Dimensions For Model 80RF Solid Overlay Door

.....

Recommended Rough in Opening Dimensions

For Model 80RF Solid Overlay Door.

............

....... 8

Full Overlay Panel Installation Instructions....

.........

Care and Cleaning...................................

..........

..12

Troubleshooting Guide.........................

...........

......13

Obtaining Service...............................

.......

.........

..13

Household Product Warranty................

...............

...14

Important Safety Instructions

Warnings and safety instructions appearing in this

guide are not meant to cover all possible condi-

tions and situations that may occur. Common sense,

caution, and care must be exercised when installing,

maintaining, or operating this appliance.

Recognize Safety Symbols,

Words, and Labels.

WARNING-Hazards or unsafe practices which could

result in personal injury.

CAUTION-Hazards or unsafe practices which could

result in personal injury or property or product damage.

NOTE-Important information to make a problem free

installation.

UNPACKING YOUR REFRIGERATOR

Remove Packaging

Your refrigerator has been packed for shipment with

all parts that could be damaged by movement securely

fastened. Cut the banding material at the bottom of the

carton, unfold the carton at the bottom and remove the

carton from the appliance. Remove the plastic bag, styro-

foam corner posts and any tape holding the door closed

and internal components in place. The owners manual is

shipped inside the refrigerator in a plastic bag along with

the warranty registration card.

Important

Keep your carton packaging until your refrigerator has

been thoroughly inspected and found to be in good con-

dition. If there is damage, the packaging will be needed

as proof of damage in transit. Afterwards please dispose

of all items responsibly in particular the plastic bags

which can be a suffocation hazard.

Note to Customer

This merchandise was carefully packed and thoroughly

inspected before leaving our plant. Responsibility for

its safe delivery was assumed by the retailer upon ac-

ceptance of the shipment. Claims for loss or damage

sustained in transit must be made to the retailer.

DO NOT RETURN DAMAGED MERCHANDISE TO THE

MANUFACTURER - FILE THE CLAIM WITH THE RETAILER.

Help Prevent Tragedies

Child entrapment and suffocation are not problems of the

past. Junked or abandoned refrigerators are still danger-

ous - even if they sit out for “just a few days”.

If you are getting rid of your old refrigerator, please follow

the instructions below to help prevent accidents.

Before you throw away your old refrigerator or freezer:

Take off the doors or remove the drawers.•

Leave the shelves in place so children may not easily•

climb inside.

If the unit was shipped or has been laying on its back for

any period of time allow the refrigerator to sit upright for

a period of at least 24 hours before plugging in. This will

assure oil returns to the compressor. Plugging the re-

frigerator in immediately may cause damage to internal

parts.

It is important you send in your warranty registration card im-

mediately after taking delivery of your refrigerator or you can

The following information will be required when registering

your unit.

Model Number

Serial Number

Date of Purchase

Dealers name and address

The model number and serial number can be found on the

serial plate which is located inside the cabinet on the left side

near the top.

Warranty Registration

INSTALLING YOUR REFRIGERATOR

Figure 2

Do not splash or spray water from a hose on the re-•

frigerator! Doing so may cause an electrical shock,

which may result in severe injury or death.

This unit should not, under any circumstances, be•

ungrounded.

Grounding Method

This product is factory equipped with a power supply cord

that has a three-pronged, grounded plug. It must be

plugged into a mating grounding type receptacle in accor-

dance with the National Electrical Code and applicable lo-

cal codes and ordinances (see Figure 2). If the circuit does

not have a grounding type receptacle, it is the responsibility

and obligation of the customer to exchange the existing

receptacle in accordance with the National Electrical Code

and applicable local codes and ordinances. The third

ground prong should not, under any circumstances, be cut

or removed.

Electrical Connection

115 volts, 3.3 amps running max. 15 amp dedicated circuit

required. 3 prong grounded receptacle required.

Leveling Legs

Front Grille,

keep this

area open.

Figure 1

Select Location

The proper location will ensure peak performance of your

appliance. We recommend a location where the unit will

be out of direct sunlight and away from heat sources. To

assure your product performs to speciﬁcations the recom-

mended installation location temperature range is from 65

to 90°F(18 to 32°C).

Cabinet Clearance

Ventilation is required from the bottom front section of the

unit. Keep this area open and clear of any obstructions.

Adjacent cabinets and counter top can be installed around

the unit as long as the grille and door access remain unob-

structed.

Do not use an extension cord

with this appliance.

Front Grille

Do not obstruct the front grille. The openings within the

front grille provides air to ﬂow into and exit from the refrig-

erator condenser. For this reason it is important this area to

not be obstructed and be kept clean. Marvel does not rec-

ommend the use of custom made grilles as air ﬂow may be

restricted because of inadequate openings. (See Figure 1).

Leveling Legs

Adjustable legs at the front and rear corners of the unit

should be set so the unit is ﬁrmly positioned on the ﬂoor

and level from side to side and front to back. Turn leveling

legs clockwise to raise unit, counterclockwise to lower it.

(See Figure 1).

USING YOUR REFRIGERATOR

Setting the temperature control:

Initially set the cold control midway between the numbers

(between the #3 and #4).After at least 2 hours adjust to

the temperature that suits you. The higher the number you

select, the cooler the temperature. (See ﬁgure 3). After

loading the refrigerator allow at least 24 hours for your

refrigerator to reach a new temperature setting.

Defrosting instructions:

Never use a scraper or any tool that might scratch or pierce

the cooling plate. Follow these steps whenever 1/4” or more

of frost accumulates:

1) Disconnect the power cord and set the cold control knob

to the “OFF” position.

2) Remove contents.

3) Place pans of hot water on the cooling plate if you wish

to speed up defrosting.

4) Wipe out the interior and replace contents.

5) Connect power cord to outlet.

6) Set temperature control to desired level.

Cold control

underneath door

in grille

Figure 3

Recommended Rough in Opening Dimensions, Models 61RF Solid Door

*24” (61 cm)

standard cabinet

depth

* Depth dimension may vary depending on

each individual installation.

34-1/2”

(87.6 cm)

Electrical Requirements: 115 volts,

3.3 amps running max. 15 amp

dedicated circuit required. 3 prong

grounded receptacle required.

Power outlet can be located in the

back wall behind unit. Add 1” to

depth for thickness of plug, or recess

outlet 1” into the wall. Power outlet

can also be installed in adjacent

cabinetry with a cutout for routing of

power cord. Follow all local building

codes when installing electrical and

unit.

Product weight = 120 lbs. (54.5 kg.)

24” (61 cm)

DIMENSIONS FOR MODELS 61RF SOLID DOOR

3” to 3-1/4”

7.62 to 8.26cm)

34-1/4” to 34-1/2”

87 to 87.6cm)

23-7/8”

(60.66cm)

22”

(55.8cm)

24-1/16”

(61.11cm)

26”

(66.04cm)

47”

(119.38cm)

Recommended Rough in Opening Dimensions, Model 61RF Solid Overlay Door

*24” (61 cm)

standard cabinet

depth

* Depth dimension may vary depending on

each individual installation.

34-1/2”

(87.6 cm)

Electrical Requirements: 115 volts,

3.3 amps running max. 15 amp

dedicated circuit required. 3 prong

grounded receptacle required.

Power outlet can be located in the

back wall behind unit. Add 1” to

depth for thickness of plug, or recess

outlet 1” into the wall. Power outlet

can also be installed in adjacent

cabinetry with a cutout for routing of

power cord. Follow all local building

codes when installing electrical and

unit.

Product weight = 120 lbs. (54.5 kg.)

24” (61 cm)

DIMENSIONS FOR MODEL 61RF SOLID OVERLAY DOOR

3” to 3-1/4”

7.62 to 8.26cm)

34-1/4” to 34-1/2”

87 to 87.6cm)

23-7/8”

(60.66cm)

22”

(55.8cm)

24-1/16”

(61.11cm)

46-27/32”

(119.02cm)

23-5/16”

(59.21cm)

*24” (61 cm)

standard cabinet

depth

* Depth dimension may vary depending on

each individual installation.

34-1/2”

(87.6 cm)

Electrical Requirements: 115 volts,

3.3 amps running max. 15 amp

dedicated circuit required. 3 prong

grounded receptacle required.

Power outlet can be located in the

back wall behind unit. Add 1” to

depth for thickness of plug, or recess

outlet 1” into the wall. Power outlet

can also be installed in adjacent

cabinetry with a cutout for routing of

power cord. Follow all local building

codes when installing electrical and

unit.

Product weight = 135 lbs. (61.4 kg.)

30” (76.2 cm)

Recommended Rough In Opening Dimensions, Model 80RF Solid Door

DIMENSIONS FOR MODEL 80RF SOLID DOOR

3” to 3-1/4”

7.62 to 8.26cm)

34-1/4” to 34-1/2”

87 to 87.6cm)

22”

(55.8cm)

26”

(66.04cm)

24-1/16”

(61.11cm)

47”

(119.38cm)

29-7/8”

(75.9cm)

Recommended Rough In Opening Dimensions, Model 80RF Solid Overlay Door

*24” (61 cm)

standard cabinet

depth

* Depth dimension may vary depending on

each individual installation.

34-1/2”

(87.6 cm)

Electrical Requirements: 115 volts,

3.3 amps running max. 15 amp

dedicated circuit required. 3 prong

grounded receptacle required.

Power outlet can be located in the

back wall behind unit. Add 1” to

depth for thickness of plug, or recess

outlet 1” into the wall. Power outlet

can also be installed in adjacent

cabinetry with a cutout for routing of

power cord. Follow all local building

codes when installing electrical and

unit.

Product weight = 135 lbs. (61.4 kg.)

30” (76.2 cm)

DIMENSIONS FOR MODEL 80RF SOLID OVERLAY DOOR

3” to 3-1/4”

7.62 to 8.26cm)

34-1/4” to 34-1/2”

87 to 87.6cm)

22”

(55.8cm)

24-1/16”

(61.11cm)

23-5/16”

(59.21cm)

29-7/8”

(75.9cm)

46-27/32”

(119.02cm)

FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS

Step 1: Verify door alignment

The door should be parallel to the sides and top of the

refrigerator. If alignment is necessary the door may be

adjusted by loosening the 2 screws which secure the

hinge adapter brackets to the door and adjusting the

door side to side. Use a 5/32” allen wrench for this pro-

cedure. (See Figure 4 below).

Figure 4

Hinge adapter screws loos-

en these to adjust door, on

the top and bottom of the

door

Top hinge pin

remove to remove

the door.

Door must be

parallel to top

and sides of

refrigerator

Step 2: Remove door

Remove the top hinge pin from the hinge with an 1/8”

allen wrench. Remove the door by angling the top of the

door outward and lifting the door off the bottom hinge.

(See detail in Figure 4).

Step 3: Remove gasket

Lay the door on its front being careful not to scratch it.

Remove the door gasket by peeling up and out of the

channel.

Step 5: Clamp panel to door

Set the overlay panel on the door front, align the edges,

and clamp together. Clamp the panel ﬁrmly but be care-

ful not to crush the foam in the door or scratch the door.

Step 4: Cut overlay panel

Depending on the refrigerator model cut the overlay

panel to the dimensions shown in Figure 5 and Table A

below.

Front of

overlay

panel

Figure 5

Model W H

61RF 23-5/8”

(59.99cm)

30-5/16”

(76.99cm)

80RF 29-5/8”

(75.23cm)

30-5/16”

(76.99cm)

Table A

For overlay with lock option panel thickness to be

3/4” (19mm) maximum to 5/8” (16mm) minimum.

Weight of the overlay panel should not exceed 20 pounds

(9.1 kilograms).

For the door closer to work properly it is necessary to

maintain a minimum space of 9/32” (7mm) between the

door and cabinet ﬂange as shown . This space can be

adjusted by adjusting the top and bottom hinge adapters.

9/32”

(7mm)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Marvel Kühlschrank Handbücher

Marvel

Marvel 66SWBE-BD Bedienungsanleitung

Marvel

Marvel 61AR-BB-O Bedienungsanleitung

Marvel

Marvel MOKR124-SSD1A Bedienungsanleitung

Marvel

Marvel 66BWM-BS-G Bedienungsanleitung

Marvel

Marvel 30AR-BB-O Bedienungsanleitung

Marvel

Marvel MLCP215-IS01B Bedienungsanleitung

Marvel

Marvel MPFZ424-IS31A Bedienungsanleitung

Marvel

Marvel 66WBM-BS-G Bedienungsanleitung

Marvel

Marvel MARE124 Bedienungsanleitung

Marvel

Marvel MLCL215-IS01B Bedienungsanleitung

Marvel

Marvel 6BAR-BN Bedienungsanleitung

Marvel

Marvel MLRE215-SG01A Bedienungsanleitung

Marvel

Marvel 80RF-BB Bedienungsanleitung

Marvel

Marvel 61AR-BB Bedienungsanleitung

Marvel

Marvel 6ADA-BB Bedienungsanleitung

Marvel

Marvel 61WCM-BB-G Bedienungsanleitung

Marvel

Marvel MPBV424SS31A Bedienungsanleitung

Marvel

Marvel MPWD424-IS31A Bedienungsanleitung

Marvel

Marvel MOKR124 Bedienungsanleitung

Marvel

Marvel MOKR224 Bedienungsanleitung

Marvel

Marvel 6BAR-BD Bedienungsanleitung

Marvel

Marvel MLRE124-IS11A Bedienungsanleitung

Marvel

Marvel 60RD-BB-F Bedienungsanleitung

Marvel

Marvel AGA MP42SS2 Fehlerbehebungshandbuch

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung