3
SAFETY INFORMATON
1.2 Operating Safety
Failure to follow instructions in this manual may lead to serious injury or even death! This
equipment is to be operated by trained and qualified personnel only! This equipment is for
industrial use only.
The following safety guidelines should always be used when operating the concrete saw:
DO NOT operates or services this equipment before reading the entire manual. Always read,
understand, and follow procedures in operator’s Manual before attempting to operate
equipment.
ALWAYS be sure to operator is familiar with proper safety precautions and operating
techniques before using the saw. This equipment should not be operated by persons under 18
years of age.
NEVER operate this equipment without proper protective clothing, shatterproof glasses,
steel-toed boots and other protective devices required by the job.
NEVER operate this equipment when not feeling well due to fatigue, illness or under the
influence of drugs or alcohol.
NEVER use accessories or attachments, which are not recommended by MASALTA for this
equipment. Damage to the equipment and/or injury to user may result.
The manufacturer does not assume responsibility for any accident due to equipment
modifications.
Whenever necessary, replace nameplate, operation and safety decals when they become
difficult to read.
ALWAYS check the machine for loosened threads or bolts before starting.
NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before
servicing engine or saw.
High Temperatures – Allow the engine to cool before adding fuel or performing service and
maintenance functions. Contact with hot components can cause serious bums.
NEVER operate the saw in any enclosed or narrow area where free flow of the air is restricted.
There is a risk of carbon monoxide poisoning. It could cause serious damage to the saw or
engine and may cause injury to people.
ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the
engine and allow it to cool. Do not smoke around or near the machine.
NEVER operate the saw in an explosive atmosphere or near combustible materials. Fire
and/or explosions may result from errant sparks from the equipment.
Stop the engine when leaving the saw unattended. Block the unit when leaving or when using
on a slope.
Maintain this equipment in a safe operating condition at all times. Never use fuel as a cleaning
agent.
ALWAYS store equipment properly when it is not being used. Equipment should be stored in a
clean, dry location out of the reach of children.
