Master Bilt Pizza Prep Unit PPT-67 Bedienungsanleitung
ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
CONSTRUCTION
• Design meets NSF 7 criteria
• Extra deep 191/2" full length
removable cutting board
standard
• Stainless steel interior and
exterior
• Foamed-in-place “low ODP”
urethane insulated walls and
doors
• Standard recessed door handles
• Adjustable, heavy-duty stainless
steel wire shelves
• 5" diameter casters (2 locking, 2
non-locking)
• Door width: 243/8"
• Stainless steel louver distributes
air to all areas of the unit
• Louver is food acid and
stain-resistant
• Front air intake and rear exhaust
• Nine 6" deep polycarbonate
pans included with unit
REFRIGERATION
• Refrigerant: R-134a
• Powerful forced-air refrigeration
system holds constant
temperature throughout cabinet
• Condensate drain pan
• Large evaporator fan for
optimum cooling efciency
• Self-contained, no plumbing
required
• Minimum 4” clearance required
between cabinet back and wall
• Temperature range: 33° to 41°F
(1° to 5°C)
• R-factor (insulation efciency
rating): 14.75 for bottom, sides
and rear, 13.12 for top
WARRANTY
• Standard limited four year
extended compressor and one
year limited parts and labor
FEATURES
PPT-67
PPT SERIES
Pizza Prep Unit
MODELS
❑ PPT-67
NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
PPT SERIES
PIZZA PREP UNIT
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. PPT-67.
Provide_______________( ) Pizza Prep
Unit(s), Master-Bilt model no. PPT-67.
Model design will meet NSF 7 criteria
with a stainless steel interior and exte-
rior. Standard features include adjustable,
heavy-duty stainless steel wire shelves and
5" diameter casters. All doors to have stan-
dard recessed handles. Prep unit will also
1225-7/09-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
Via plug in, 10 foot long, exible 3
wire 16/3 cord with molded plug.
PLAN VIEW SIDE VIEW ELEVATION VIEW
feature a standard extra-deep 191/2" full
length removable cutting board. In addi-
tion, nine 6-inch deep polycarbonate pans
will be included with the unit.
Forced-air refrigeration system will be
self-contained and will use R-134a refrig-
erant. Each unit will also contain a stan-
dard condensate evaporator. A stainless
steel louver will provide air distribution
throughout the unit. The temperature range
will be 33° to 41°F (1° to 5°C).
Unit to have a standard limited four year
extended compressor and one year limited
parts and labor warranty.
Unit to be UL, C-UL and NSF listed.
NEMA 5-15P
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS AMPS
UNIT
H.P.
NO. OF
SHELVES
PAN
CAPACITY
CAPACITY
CU. FT.
SHIP
CU. FT.
SHIP
WT.
LB/KGL D H* L D H*
PPT-67 67 323/8413/41701 822 1060 115 10.4 5/8 4 9 20.0 64.2 395/180
*Height includes casters.
Andere Master Bilt Tisch zur Lebensmittelzubereitung Handbücher
