MasterCraft 058-8987-8 Bedienungsanleitung
INSTRUCTION MANUAL
AIR-POWERED
MINI PALM-GRIP NAILER
058-8987-8
TABLE OF CONTENTS
2
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
QUICK START GUIDE
TECHNICAL SPECIFICATIONS 3
SAFETY GUIDELINES 4–9
KEY PARTS DIAGRAM 10
IMPORTANT INFORMATION 11–13
TYPES OF FASTENERS 14
OPERATING INSTRUCTIONS 15–17
MAINTENANCE 18–19
TROUBLESHOOTING 20–21
EXPLODED VIEW 22
PARTS LIST 23
WARRANTY 24–25
SAFETY GUIDELINES
4
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
Safety guidelines
This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING
EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it
thoroughly before using the product. The symbols listed below are used to indicate this information.
Note- The word “Note” is used to inform the
reader of something he/she needs to know about
the tool.
PERSONAL SAFETY
These precautions are intended for the personal safety of the user and others working with the user.
Please take time to read and understand them.
DANGER!
Potential hazard that will result in serious
injury or loss of life.
WARNING!
Potential hazard that could result in
serious injury or loss of life.
CAUTION!
Potential hazard that may result in
moderate injury or damage to equipment.
SAFETY GUIDELINES
5
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
SAFETY GUIDELINES
DANGER!
Potential hazard that will result in serious injury or loss of life.
•Keep children away from the work area. Do not allow children to handle
power tools.
•Do not use this tool in the presence of flammable liquids or gases. Sparks
that are created during use may ignite gases.
•Do not point the tool towards yourself or other people with the nail loaded.
•Do not keep the tool pressed while loading the nail.
•Do not disconnect or reconnect the air hose with the tool pressed or with a
nail in the nail guide. The Air-powered Mini Palm-grip Nailer may fire when
it is reconnected to the air supply.
•Do not use oxygen or any other combustible or bottled
gas to power air-powered tools. Failure to observe this
warning can cause explosion and serious personal injury
or death. Use only compressed air to power air-powered
tools. Failure to comply will result in serious injury or loss
of life.
•Risk of electric shock: Do not expose a compressor to rain. Store it indoors.
Disconnect the compressor from the power source before servicing.
Compressor must be grounded. Do not use grounding adaptors.
Oxygen
Hydrogen
Explosive
Combustible
MC-OM-02
SAFETY GUIDELINES
6
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
•Risk of personal injury: Do not direct compressed air from the air hose
towards the user or other persons.
•Risk for breathing: Never directly inhale the air produced by the compressor.
•Risk of bursting: Do not adjust the pressure switch or safety valve for any
reason. They have been preset at the factory for this compressor’s maximum
pressure. Tampering with the pressure switch or the safety valve may cause
personal injury or property damage.
•Risk of burns: The pump and the manifold generate high temperatures. In
order to avoid burns or other injuries, do not touch the pump, the manifold,
or the transfer tube while the compressor is running. Allow the parts to cool
down before handling or servicing. Keep children away from the compressor
at all times.
•Risk of bursting: Make sure the regulator is adjusted so
that the compressor outlet pressure is set lower than the
maximum operating pressure of the tool. Before starting
the compressor, pull the ring on the safety valve to make
sure the valve moves freely. Drain water from tank after
each use. Do not weld or repair tank. Relieve all pressure
in the hose before removing or attaching accessories.
MC-OM-22
SAFETY GUIDELINES
7
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
WARNING!
Potential hazard that could result in serious injury or loss of life.
•Do not allow inexperienced or untrained individuals to operate an
Air-powered Mini Palm-grip Nailer or any other air-powered tool.
•Keep hands and other parts of the body away from the nail guide during
use. Keep hands, feet, and all other parts of the body at least 8" (20 cm)
away from the firing head. Objects in the workpiece can cause serious injury
if they cause the nails to be deflected or to be driven away from the point of
entry.
•Do not connect the tool to a compressed air source with a pressure output
that is higher than 120 psi.
•Do not drive fasteners on top of a nailed fastener. The fastener may
ricochet, causing serious personal injury.
•Do not drive fastener on scaffoldings, ladders, or such similar construction,
not working on airtight case, and vehicles.
•Use only genuine parts and accessories recommended by the manufacturer.
•Use only nails of the proper size and gauge, as specified in this manual
(see
section “Technical specifications”)
. Failure to comply could lead to serious
injury or loss of life.
SAFETY GUIDELINES
8
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
•Carry the tool by the handle only, keeping fingers away from the trigger. Do
not carry the tool by the hose, magazine, or any other parts.
•Keep proper footing at all times in order to ensure correct balance.
•Do not drive nails close to the edge of the workpiece. The workpiece may
split, which could allow the nail to fly free or ricochet and cause serious
personal injury.
• Do not use a tool that is leaking air, that has missing or damaged parts, or
that requires repairs. Verify that all screws are securely tightened.
• For optimal safety and tool performance, inspect the tool daily in order to
ensure free movement of the trigger, safety mechanisms, and springs.
•Keep the work area clean. A cluttered or dirty workbench may lead to an
accident. Floors should be kept clear.
•This tool is not a toy. Use it with caution.
•Handling and storage of oil: Use with adequate ventilation. Avoid contact of
oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a
tightly closed container in a cool, dry, well-ventilated area free from
incompatible substances.
•Tripping hazard: The air hose may become a tripping hazard when it is
placed in the work area. Use care when walking in the work area.
SAFETY GUIDELINES
9
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
Note: Recycle unwanted materials rather than disposing of them as waste. Sort the tools, hoses, and
packaging in specific categories and take to the local recycling centre or dispose of in an
environmentally safe way.
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
•Disconnect the tool from the air supply and turn off the
compressor before performing any maintenance or changing
accessories, when the tool is not in use, when it is being
handed to another person, and when it is left unattended.
Failure to comply may result in moderate injury.
•Use safety goggles and ear protection:
Wear safety glasses with side shields when operating the
tool and verify that others in the work area are also wearing
safety glasses. Safety glasses must conform to American
National Standards Institute (ANSI Z87.1) requirements and
must provide protection from flying particles from the front
and the sides.
Air-powered tools are loud and the sound can cause hearing
damage. Always wear ear protection to help prevent hearing
damage and loss. Failure to comply may result in moderate
injury.
MC-588987-09
MC-OM-01
KEY PARTS DIAGRAM
10
AIR-POWERED MINI PALM-GRIP NAILER 058-8987-8
No. Description No. Description
1 Air inlet plug 3 Turn buckle
2 Magnet
MC-588987-01
1
2
3
Inhaltsverzeichnis
Andere MasterCraft Elektrowerkzeuge Handbücher
MasterCraft
MasterCraft 054-4273-8 Bedienungsanleitung
MasterCraft
MasterCraft 058-9847-6 Bedienungsanleitung
MasterCraft
MasterCraft SC20IFS Bedienungsanleitung
MasterCraft
MasterCraft 054-1266-4 Bedienungsanleitung
MasterCraft
MasterCraft 055-5530-8 Bedienungsanleitung
MasterCraft
MasterCraft 54-4892-4 Bedienungsanleitung
MasterCraft
MasterCraft 054-5849-4 Bedienungsanleitung
MasterCraft
MasterCraft 055-5509-2 Bedienungsanleitung
MasterCraft
MasterCraft 054-3121-6 Bedienungsanleitung
MasterCraft
MasterCraft 058-7732-0 Bedienungsanleitung
MasterCraft
MasterCraft 54-4790-6 Bedienungsanleitung
MasterCraft
MasterCraft 058-9331-2 Bedienungsanleitung
MasterCraft
MasterCraft 054-8223-4 Bedienungsanleitung
MasterCraft
MasterCraft 054-8259-0 Bedienungsanleitung
MasterCraft
MasterCraft 54-6505-6 Bedienungsanleitung
MasterCraft
MasterCraft 54-8110-2 Bedienungsanleitung
MasterCraft
MasterCraft 055-5511-4 Bedienungsanleitung
MasterCraft
MasterCraft 054-8296-0 Bedienungsanleitung
MasterCraft
MasterCraft 058-813-2 Bedienungsanleitung
MasterCraft
MasterCraft 054-1252-6 Bedienungsanleitung
