Matrix Appliances MS100 Referenzhandbuch
Single Oven
Manual for installation,
use and maintenance
MS100
parts +1 year labour
year
guarantee
www.matrixappliances.co.uk
2
Important
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied with
this product following incorrect installation or misuse of the appliance
or use in a commercial environment.
This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault
with your appliance and to register your appliance for guarantee
purposes.
Appliance Model
Serial Number
EU Declarations of Conformity
This appliance has been manufactured to the strictest standards
and complies with all applicable legislation, including Electrical safety
(LVD) 2014/35/EU and Electromagnetic interference (EMC) 2014/30/
EU.
3
Parts intended to come into contact with food conform to 1935/2004/
EC.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both
energy and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
Important
• Read the user instructions carefully before using the
oven for the first time.
• Follow the instructions for first use of the oven.
• Clean the oven regularly.
• Remove spills as soon as they occur.
• Always use oven gloves when removing shelves and
trays from the oven.
• Do not allow children near the oven when in use.
• Do not allow fat or oils to build up on the oven shelves,
grill pan or oven base.
• Do not place any cooking utensils or plates directly on
the oven base.
• Always grill with the oven door closed.
4
• Do not grill food containing fat without using the grill pan
grid.
• Do not cover the grill pan grid or the oven walls with
aluminium foil.
• Do not use the oven tray for roasting.
• Do not perform maintenance or cleaning of the oven
without first switching off the electricity supply. If the
oven has recently been used, allow to cool.
• Do not place hot enamel parts in water. Leave them to
cool first.
• Do not allow vinegar, coffee, milk, saltwater, lemon or
tomato juice to remain in contact with enamel parts.
• Do not use abrasive cleaners or powders that will
scratch the surface of the enamel or stainless steel.
• Do not attempt to repair the internal workings of your
oven.
• Do not cover the oven floor with aluminium foil.
Before First Use
• The decorative metal finish of this appliance has been coated
with a preservative to protect it during transport and storage. This
should be removed during installation by using a non-abrasive
stainless steel cleaner, and dried thoroughly afterwards. Always
follow the instructions given with the cleaner being used.
• Before using the oven for the first time we recommend that you
clean the oven with soapy water, rinse carefully and then heat on
each of the programs on page 5 at maximum temperature for the
specified time. An unpleasant smell may be produced, caused
by grease remaining on the oven elements from the production
process.
5
15 minutes of full grill
30 minutes of fan oven
Please note:
• This oven has been fitted with a cooling fan to achieve maximum
efficiency and to maintain low surface temperatures. The cooling
fan will switch on automatically when the oven switches on. It
is normal for the cooling fan to run for an hour or more after use,
depending on the duration, temperature and type of cooking
program used.
• The oven light remains on for every cooking function.
6
Control Panel
Control panel:
A. Temperature control knob B. Function control knob
Oven Controls and Use
Temperature knob
• To set the temperature, turn the temperature knob clockwise to the
required temperature.
• Once the oven has reached the required temperature, the
temperature indicator lamp on the control panel will switch off.
• The temperature indicator lamp will light up when the oven
elements are in operation.
Cooking function knob
To set the function, turn the function control knob to the required
function.
Each of the oven functions uses different elements within the oven to
offer you the best choice of cooking every time. These are explained
on page 7.
50
75
100
125
150
175
200
225
250
0
0
fig.1 1
A B
7
Please note, the oven light will operate on all functions.
Defrost
Using the fan only this oven function circulates the air
around the oven cavity, speeding up the natural defrost
process
Fan Oven
Using the circular element and the fan with a
temperature between 50°C and 250°C, this cooking
function blows the air into and around the oven cavity.
Heating in this manner helps to ensure uniform heat
circulation. Both cooking temperatures and cooking
times can be reduced for a more energy efficient
cooking process.
Full Grill
This function radiates the heat from the grill element and
the top element.
This fully temperature variable grill is ideal for grilling a
full family meal. It can be set between 50°C and 250°C
maximum.
Half Grill
This function radiates the heat from the grill element.
This fully temperature variable grill can be set between
50°C and 250°C maximum.
8
For each grill function please note:
• Always grill with the oven door closed.
• Put the grill pan as close to the grill as possible.
• Do not grill for more than 30 minutes at a time.
• Preheat the grill for up to five minutes with the oven door closed.
Internal shelf positions
The shelves and grill pan can be inserted into any one of five different
positions.
To refer to these they are numbered from “1” to “5”, with “5” nearest the
grill elements at the top of the oven. Printing on the inside of the oven
door frame is designed to remind you of this numbering.
Cleaning and maintenance
Keeping your oven clean and well maintained helps to prolong the
fault-free lifespan of it. It is important that, before any cleaning or
maintenance is performed, you switch off the oven at the mains
supply. Do not start any cleaning or maintenance until the oven
has been allowed to cool completely.
Cleaning the oven exterior
As the oven has a stainless steel or enamel surface, you should use a
nonabrasive cleaner. Any abrasive cleaner (including Cif) will scratch
the surface and could erase the control panel markings. Stainless
steel can be effectively cleaned by simply using a dilute solution of
water and mild detergent and drying to a shine with a clean cloth.
Proprietary stainless steel cleaners are available. We recommend a
microfibre cloth for stainless steel surfaces. If necessary, wipe any
9
area that has been cleaned using a damp soft cloth or tissue to
remove any residual cleaning fluid and then wipe dry with a clean,
dry cloth or tissue (such as kitchen towel).
Cleaning the oven interior
The oven should always be cleaned after use when it has been
allowed to cool down.
The cavity should be cleaned using a mild detergent solution and
warm water and then wiped dry with a suitable, clean cloth.
Suitable proprietary chemical cleaners may be used after first
consulting with the manufacturers’ recommendations and testing a
sample on a small area of the oven cavity. Abrasive cleaning agents
or scouring pads/cloths should not be used on the cavity surface.
IMPORTANT:
• Steam cleaners must not be used when cleaning this
appliance.
•Once care and maintenance is complete, ensure that all parts
are correctly replaced before using the oven.
Removing the appliance door
In order to allow for easier access into the oven cavity for cleaning,
it is possible to remove the door. Before removing the door, ensure
that you have an area prepared in which you can place the removed
door. This area should ideally be protected by something like a
folded, dirt-free, towel to help prevent damage to surfaces and the
door.
• Open the door fully
• Lift and tilt the safety catch part of the hinge so that is fully
10
extended and points towards the
door (fig. 2).
• Close the door most of the way, lift
it slightly and then pull it, safely but
firmly, towards you.
Replacing the appliance door
• Hold the door to the appliance
in the closed position and
manoeuvre the hinges so that the
part of the hinge, highlighted by the
star in fig. 3, inserts into the hinge
slot in the cavity frame.
• Next, ensure the notch on the
underside of the hinge sits on
the lip of the hinge slot. Open the
door fully. Each hinge should be
seated in the same way as the
hinge in fig. 4. If it is not, follow the
steps for removing the door and try
replacing it again.
• Finally, lift the safety catch part
of the hinges back into place so
that they are lying flat against the
hinges.
Please note: If the hinge safety
catches are not in the correct place then the door and/or appliance
may receive damage when attempting to close the door,
fig. 2
fig. 3
fig. 4
Inhaltsverzeichnis
Andere Matrix Appliances Ofen Handbücher
