Matrix Orbital MX Series Bedienungsanleitung

MX Series PC Bay Insert

Installation Manual for the

MX2, MX3, MX4, MX5 or MX6

Contents

Installation and Startup Guide

for the MX2, MX3, MX4, MX5 or MX6 Series ................................................. 3

Installing Your Display ................................................................................ 4

Installing Windows USB Drivers

for the MX2, MX3, MX4, MX5 or MX6 ............................................................. 5

Installing Windows XP USB Drivers ........................................................ 5

Installing LCDC .................................................................................................... 10

Registering LCDC Software .....................................................................10

Installation & Startup of LCDC ............................................................... 12

Notes .......................................................................................................................16

Technical Support

Matrix Orbital tech support is available Monday to Friday, 9:00am to 5:00pm.

You can call 1-403-229-2737 ext. 3 or e-mail suppor[email protected].

Please e-mail your Windows version, display used, what you have tried

and the problem in detail so we can help you faster and more efﬁciently.

As well, please visit our forums (www.lcdforums.com) where most

common problems have probably been talked about.

For more detailed instructions, please use the supplied eCD.

E-commerce: www.matrixorbital.com

Support: www.matrixorbital.ca

Forums: www.lcdforums.com

LCDC: www.lcdc.cc

Page 2

Installation and Startup Guide for the

MX2, MX3, MX 4, MX5 or MX6 Series

Thank you for purchasing the original and one of the world’s ﬁnest

PC bay insert displays. At Matrix Orbital, we are proud to offer quality

products that are easy to install and use. Please note that the MX2,

MX3, MX4, MX5 and MX6 are identical for installation purposes.

They are different only in the technology that they possess. These

instructions are also available on the eCD in full color.

Now please check that everything was correctly shipped to you:

• 1x Display in bay insert

• 1x 3ft USB cable attached to LCD

• 1x eCD (with a LCDC activation code on top)

• 4x screws (they will be attached to the bay insert)

If any items are missing please contact us at 403-229-2737 or email

[email protected] and the problem will be corrected immediately.

Page 3

Installing Your Display

1. Turn off your computer.

2. Remove the cover from an empty 5¼” drive bay and the sides of

the case.

3. Insert the display into the drive bay.

4. Screw the bracket into place.

5. Feed the USB cable through an empty PCI bracket. If you have the

optional Internal USB cable, please refer to the Internal USB

install page.

6. Plug in the USB cable into a free USB port on your computer.

7. Replace the sides of your case. Peel off the protective sticker on the

PC Bay insert face.

8. Turn on your computer. The display should power up and display

“Matrix Orbital MX2xx, MX3xx, MX4xx, MX5xx or MX6xx”.

234

567

Page 4

Installing Windows USB Drivers for

the MX2, MX3, MX4, MX5 or MX6

The MX2/MX3/MX4/MX5/MX6 will require Windows drivers to operate

that can be downloaded from our website or directly from the eCD.

Drivers are located on the eCD under USB_Drivers/. These drivers are

for all the Windows versions. These drivers have been tested with

Windows 98, Windows ME, Windows 2000 and Windows XP. The

drivers will create a “Virtual COM Port” on your computer, allowing

you to use any Display software or utilities. If you are installing for

Windows 2000, please use the instructions on the eCD.

Installing Windows XP USB Drivers

When the display is plugged in, Windows will detect new hardware.

Page 5

1. The Windows Installation Wizard Loads to help with the install.

Press next to continue.

2. Select Search for a suitable driver for my device and press next.

3. Specify a location.

4. Go to your CD-ROM

drive, and to the directory

USB_Drivers.

5. Windows should ﬁnd a

correct info ﬁle. Press OK,

then press next.

Page 6

6. Press “Continue Anyway”.

7. Part I of the install is now completed.

8. Windows will now detect a second new device.

9. Once again, press Search for a suitable driver for my device and

press next.

Page 7

10. Like before, specify a location.

11. Point the Install Wizard to the correct directory.

12. Windows install will ﬁnd a second info ﬁle, press OK and

then next.

13. Press “Continue Anyway”.

Page 8

14. Installation of the drivers is now completed.

15. Lets double check that the device drivers were properly loaded

by going into the Control Panel/Hardware.

Now you are ready to install LCDC!

Page 9

Installing LCDC

Welcome to the exciting world of Matrix Orbital and LCDC. As part

of the MX bundle you have a full copy of LCDC included for your

personal use. LCDC has been developed by Matthew Augier

(aka Mat-d-Rat) for Matrix Orbital displays. LCDC is the worlds most

advanced LCD/VFD software featuring the most advanced plugins

and features. The LCDC software is included on the eCD with your

display and can be found in the LCDC directory or here. If you already

have a copy of LCDC and you are looking for the latest upgrade, click

here. You will require to register your copy of LCDC with the activation

number you received on the front of your eCD. To register your LCDC

please click HERE.

The LCDC manual has been broken up into several sections to cover

the basics of LCDC. For more information, please visit the LCDC

Website manual.

Registering LCDC Software

You will be required to activate your LCDC key, please note that the

key code on the front of the CD IS NOT your LCDC serial key!

Step 1. Activating your LCDC key

Please visit http://www.lcdc.cc/bundled/

Step 2. Fill out the information and your LCDC Serial number will be

e-mailed to you right away

Page 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Matrix Orbital Computerzubehör Handbücher

Matrix Orbital

Matrix Orbital PK202-25 Bedienungsanleitung

Beliebte Computerzubehör Handbücher anderer Marken

Motorola

Motorola ATRIX Bedienungsanleitung

HP USB Media Docking Station Bedienungsanleitung

Cherry

Cherry B.UNLIMITED 3.0 Bedienungsanleitung

Logitech

Logitech IO2 Bedienungsanleitung

ARM

ARM DSTREAM-ST Bedienungsanleitung

Bartec

Bartec TC 7 Series Bedienungsanleitung

Philips

Philips SPC3540 Bedienungsanleitung

Logitech

Logitech mk220 Bedienungsanleitung

SilverStone

SilverStone LC02 Bedienungsanleitung

Flexispot

Flexispot ML2B Bedienungsanleitung

Hamlet

Hamlet UNIVERSAL COVER 101 KBT2 Bedienungsanleitung

Adam Equipment

Adam Equipment RS-485 Bedienungsanleitung

Vivo

Vivo MOUNT-KB05-4DW Bedienungsanleitung

Kvaser

Kvaser Memorator Professional Bedienungsanleitung

DRC

DRC D-Imaging Bedienungsanleitung

Sven

Sven Base 305 сombo Bedienungsanleitung

Hama

Hama 108310 Bedienungsanleitung

SpeechWare

SpeechWare FlexyMike FMK03 Bedienungsanleitung