Matrix Switch Corporation MSC-XD1608L Bedienungsanleitung

Matrix Switch Corporation

MSC-XD1608L

Product Manual

1RU 16 input 8 output 3G-SD Video Router with Button Control Panel

Revision 1.4

MSC-XD1608L Product Manual

Legal isclaimers

All material in this document is the legal property of Matrix Switch Corporation.

Information contained in this publication regarding device applications and the like is

provided for your convenience only and may be superseded by updates. It is your

responsibility to ensure that your application meets with your specications. MA RIX

SWI CH CORPORA ION MAKES NO REPRESEN A IONS OR WARRAN IES OF ANY

KIND WHE HER EXPRESS OR IMPLIED, WRI EN OR ORAL, S A U ORY OR

O HERWISE, RELA ED O HE INFORMA ION, INCLUDING BU NO LIMI ED O

I S CONDI ION, QUALI Y, PERFORMANCE, MERCHAN ABILI Y OR FI NESS FOR

PURPOSE. Matrix Switch Corporation disclaims all liability arising from this

information and its use. Use of Matrix Switch Corporation devices in life support and/or

safety applications is entirely at the buyer’s risk, and the buyer agrees to defend,

indemnify and hold harmless Matrix Switch Corporation from any and all damages,

claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly

or otherwise, under any Matrix Switch Corporation intellectual property rights.

Contacting Matrix Switch Corporation

Website http://www.matrixswitch corp.com

Toll Free (800) 764-4084

Phone +1 (530) 477-9122

Grass alley, California

Email info@matrixswitch corp.com

MSC-XD1608L Product Manual

Table 1: Document Revision History

Revision & ate Changes

Revision 1.4

2016-08-01

•Mascot protocol updated to 3.0 with System Parameter commands,

Matrix I/O mapping commands, and Panel/GPIO commands.

•Improved Software Update documentation.

•Added pinouts for RS-232 and RS-485 serial port and GPIO

Auxiliary interface.

•Added XD series systems.

Revision 1.3

2016-05-17

•Added MSC-CP59X59E panel.

Revision 1.2

2015-08-20

•Added protocol commands: MtxGroup, PanelDis, and PanelExtEn.

•Updated Mascot protocol information to version 2.4.

•New manuals for MSC-V1616(LS)(+DC), MSC-1HD1616(LS)(+DC)

Revision 1.1

2014-06-24

•Updated External Button Control Pinout section.

•Added External Button Control information for MSC-HD42L.

2014-03-17 •Fixed some document cross references.

•Minor text content and gure position changes.

2013-11-29 •MSC-4HDX6464 manual released.

•Updated Mascot protocol information to version 2.3.

•Added Vars Mascot command description.

Revision 1.0

2013-04-15

•Initial release of modular product manual.

MSC-XD1608L Product Manual

Table of Contents

1 Getting Started....................................................................................................................................................7

1.1 Device Connections......................................................................................................................................7

1.2 Powering Up The Device..............................................................................................................................8

1.3 Front Panel Button Inter ace.........................................................................................................................8

1.3.1 Audio Breakaway..................................................................................................................................8

1.4 Web Page Inter ace........................................................................................................................................8

1.4.1 Accessing The Web Page Inter ace........................................................................................................8

1.4.2 Network Settings...................................................................................................................................9

1.4.3 Matrix Routing......................................................................................................................................9

1.4.4 Labels....................................................................................................................................................9

1.4.5 Presets..................................................................................................................................................10

1.4.6 Panel Remote Router IP Address.........................................................................................................10

1.5 Network Planning........................................................................................................................................10

1.5.1 Installation Example............................................................................................................................12

1.6 Advanced Panel Con iguration...................................................................................................................12

2 Web page interface............................................................................................................................................13

2.1 Overview.....................................................................................................................................................13

2.2 Routing Tab.................................................................................................................................................13

2.2.1 Changing a connection........................................................................................................................14

2.2.2 Loading a preset..................................................................................................................................14

2.3 Presets Tab...................................................................................................................................................14

2.3.1 Loading Work Matrix rom a source target.........................................................................................15

2.3.2 Saving Work Matrix to a target...........................................................................................................15

2.3.3 Usage scenarios...................................................................................................................................15

2.4 Labels Tab...................................................................................................................................................15

2.5 Con ig Tab...................................................................................................................................................16

2.5.1 System Settings...................................................................................................................................17

2.5.2 Network Settings.................................................................................................................................17

2.5.3 Button Panel Settings..........................................................................................................................18

2.6 Command Tab.............................................................................................................................................19

3 Mascot Control Protocol..................................................................................................................................20

3.1 Protocol Changes........................................................................................................................................20

3.2 Telnet Access...............................................................................................................................................21

3.3 Serial Access...............................................................................................................................................21

3.4 Command Format........................................................................................................................................21

3.4.1 Command Names................................................................................................................................22

3.5 Response Format.........................................................................................................................................22

3.6 Command Arguments..................................................................................................................................23

3.7 System Parameters......................................................................................................................................24

3.7.1 System Parameter Table......................................................................................................................25

3.8 Core Commands..........................................................................................................................................25

3.9 Con iguration Commands...........................................................................................................................26

3.10 Miscellaneous Commands........................................................................................................................27

MSC-XD1608L Product Manual

3.10.1 C Command.......................................................................................................................................27

3.10.2 DestNames Command.......................................................................................................................27

3.10.3 DHCP Command...............................................................................................................................28

3.10.4 E Command.......................................................................................................................................28

3.10.5 Firmware Command..........................................................................................................................29

3.10.6 FrameIP Command............................................................................................................................29

3.10.7 Gateway Command...........................................................................................................................30

3.10.8 Get Command....................................................................................................................................30

3.10.9 GetS Command.................................................................................................................................31

3.10.10 Help Command................................................................................................................................31

3.10.11 IP Command....................................................................................................................................31

3.10.12 LockStatus Command.....................................................................................................................32

3.10.13 MAC Command..............................................................................................................................32

3.10.14 MapDest Command.........................................................................................................................32

3.10.15 MapSrc Command...........................................................................................................................33

3.10.16 MascotVer Command......................................................................................................................34

3.10.17 MtxC g Command...........................................................................................................................34

3.10.18 MtxGroup Command.......................................................................................................................36

3.10.19 NetMask Command.........................................................................................................................37

3.10.20 P Command.....................................................................................................................................37

3.10.21 PAdd Command...............................................................................................................................38

3.10.22 PairIO Command.............................................................................................................................38

3.10.23 PanelCmd Command.......................................................................................................................39

3.10.24 PanelCmdEn Command..................................................................................................................40

3.10.25 PanelCond Command......................................................................................................................40

3.10.26 PanelDis Command.........................................................................................................................41

3.10.27 PanelExtEn Command.....................................................................................................................41

3.10.28 PanelRate Command.......................................................................................................................42

3.10.29 PClr Command................................................................................................................................42

3.10.30 ProtoSer Command.........................................................................................................................43

3.10.31 PsetNames Command......................................................................................................................43

3.10.32 PSub Command...............................................................................................................................44

3.10.33 PView Command.............................................................................................................................44

3.10.34 Reboot Command............................................................................................................................45

3.10.35 ReclkDis Command.........................................................................................................................45

3.10.36 RemoteSync Command...................................................................................................................45

3.10.37 S Command.....................................................................................................................................46

3.10.38 SerBaud Command..........................................................................................................................46

3.10.39 Set Command..................................................................................................................................47

3.10.40 SetA Command................................................................................................................................47

3.10.41 SetS Command................................................................................................................................48

3.10.42 SrcNames Command.......................................................................................................................48

3.10.43 SysName Command........................................................................................................................49

3.10.44 SysType Command..........................................................................................................................49

3.10.45 Vars Command................................................................................................................................50

3.10.46 W Command....................................................................................................................................51

MSC-XD1608L Product Manual

3.10.47 WebPass Command.........................................................................................................................51

3.10.48 X Command.....................................................................................................................................51

4 Software Updates..............................................................................................................................................53

4.1 So tware Update on Pyxis Series Devices..................................................................................................53

4.2 So tware ailsa e recovery procedure..........................................................................................................53

4.3 TFTP So tware............................................................................................................................................54

4.3.1 Windows..............................................................................................................................................54

4.3.2 Mac OS X............................................................................................................................................55

4.3.3 Linux....................................................................................................................................................55

5 Troubleshooting.................................................................................................................................................57

5.1 Unknown IP address....................................................................................................................................57

5.2 Unexpected reboots.....................................................................................................................................57

6 Reference...........................................................................................................................................................58

6.1 Speci ications..............................................................................................................................................58

6.2 Serial Inter ace Pinout.................................................................................................................................58

6.3 GPIO Auxiliary Inter ace............................................................................................................................59

6.4 Glossary.......................................................................................................................................................60

7 Matrix Switch Corporation Warranty............................................................................................................61

MSC-XD1608L Product Manual

1 Getting Started

Congratulations on your purchase o a quality Matrix Switch Corporation product. This section contains a

general overview o device unctionality and provides in ormation to get you up and running quickly.

Additional sections in this manual can be consulted or more detailed in ormation on the subsystems and

eatures o this product.

1.1 evice Connections

The MSC-XD1608L comes with a power supply adapter, a redundant power supply and a documentation CD.

Additional cables and hardware are not usually provided.

•Power supply adapter – A 12 Volt 5 Amp power supply adapter is provided which is connected to the

5.5mm OD 2.1mm ID coaxial connector on the device and plugged into a 100-240V 50/60Hz AC power

source.

•Redundant power supply (Optional) – The additional redundant power supply can be connected via

the second power supply connector, to provide an additional power source in the event that one o the

supplies ails or is disconnected rom the power source.

•Ethernet connector (Optional) – Connect to a network switch with an Ethernet cable. Required or

accessing the web page inter ace, TCP/IP Mascot inter ace or or inter acing with remote control panels.

This device can also be connected directly to a computer or remote panel (supports auto MDI-X

allowing a crossover or straight through Ethernet cable to be used).

•SD BNC Video nputs – Connect SDI sources to input connectors using 75 Ohm Coax cable with

BNC connectors designed or high speed SDI video applications. Unused inputs can be le t

unconnected. Inputs with supported standard rate (3G, HD or SD) SDI signals will be auto re-clocked

or reduced jitter. Other non standard rates between 125 Mbit/s and 2.97 Gbit/s will be passed through

without re-clocking or jitter reduction. Adaptive cable equalization on each input can equalize input

signals rom Belden type 1694A cables up to lengths o 120m (@3G), 140m (@HD) and 400m (@SD).

•SD BNC Video Outputs – Connect SDI destinations to output connectors using 75 Ohm Coax cable

with BNC connectors designed or high speed SDI video applications. Unused outputs can be le t

unconnected. Outputs utilize standard SMPTE levels o 800mV peak-to-peak.

•Composite Video – Connect composite video sources to input connectors and destinations to output

connectors using 75 Ohm Coax cable with BNC connectors. Unused inputs or outputs can be le t

unconnected.

•External Audio Router (Optional) – An additional Matrix Switch Corporation AES or analog audio

router can be utilized with this router by connecting it to the AUX/GPIO connector with a 25 pin straight

through cable, adding an additional audio level independent o SDI embedded audio. NOTE: The audio

router should be powered on be ore the video router to ensure proper initial routing state or alternatively

Preset 0 can be recalled to initialize it at any time.

•Sync Reference (Optional) – I switching on vertical sync pulse is desired, connect one o the Sync

Re erence connectors to a sync pulse signal (NTSC, PAL or tri-level) using 75 Ohm Coax with BNC

connectors and the other Sync Re erence connector can be used as a pass-through to additional properly

75 Ohm terminated equipment or a 75 Ohm terminator should be installed. I the sync re erence

unctionality is not used, both connectors can be le t unconnected.

•RS-232 Serial (Optional) – I serial control is desired, using the Mascot P rotocol, connect a D9 emale

to male straight through cable to a control system, such as a computer. Use 115200 bps 8N1 as the serial

MSC-XD1608L Product Manual

con iguration and enable local echo to see typed characters. See Serial Inter ace Pinout or additional

details.

•RS-485 Serial (Optional) – An RS-485 port is also available utilizing pins on the same D9 connector as

the RS-232 inter ace. This port is con igured as a Mascot P rotocol control inter ace by de ault, but can

also be used to control other routers as additional matrix levels. See Serial Inter ace Pinout or

additional details.

•General Purpose /O – A D25 connector provides a GPIO auxiliary port with up to 24 input or output

3.3V logic lines or control and status inter acing with external equipment (LEDs, buttons, etc). See

GPIO Auxiliary Inter ace or more details.

1.2 Powering Up The evice

This device is not equipped with a power switch and is simply connected to the power supply adapter which is

plugged into a suitable AC power source, to power it up.

Once the device is powered it goes through the ollowing startup sequence:

•Reset switch is checked and i it is pressed then the So tware ailsa e recovery procedure is entered.

•Routing matrix is initialized to Preset 0 state (de aults to source 1 connected to all destinations).

•The button control panel is initialized and buttons are illuminated to show the initial routing status.

1.3 Front Panel Button Interface

The MSC-XD1608L is equipped with a 16x16 button panel which provides one o several options or

controlling and viewing the status o the routing matrix.

This panel inter ace provides separate input and output buttons. One output button is active at a time, indicated

by it being lit. The current connection status or the active output is indicated by the relevant numbered input

button being lit. Pressing an input button will cause that input to be connected to the current active output.

1.3.1 Audio Breakaway

An audio breakaway is per ormed by irst selecting the desired output, by pressing the relevant output button,

then pressing and holding an input button, ollowed by pressing another input button. The 1st input button

pressed selects the source o the primary level. The 2nd input button pressed will become the secondary (audio)

source and will lash, indicating a breakaway.

1.4 Web Page Interface

All Matrix Switch Corporation router and panel devices come with a built-in web page inter ace.

This is the recommended inter ace or con iguration and is also a convenient way to control the matrix routing

o the device.

Devices come actory con igured with de ault settings, unless a pre-con iguration request is made during

purchase, an example being a multi device application.

1.4.1 Accessing The Web Page Interface

The de ault network IP address or this device is 192.168.2.60. Re er to the table below or the de ault IP

addresses or other types o Matrix Switch Corporation devices.

MSC-XD1608L Product Manual

Device Type Default P Address

Video/Audio Routers 192.168.2.60

Remote Button Panels 192.168.2.64

Remote LCD Screen Panels 192.168.2.80

Table 2: Default System IP Addresses

To access the web page inter ace o the device:

1. Connect the Ethernet port o a computer either directly to the device using a straight through or

crossover cable to the same Ethernet network through a network switch or other LAN in rastructure.

2. Manually con igure the computer's IP address to be a unique address on the same IP subnet as the

device. For example 192.168.2.10. The Netmask should be 255.255.255.0. A Gateway address is not

necessary or this purpose, but could be set to 192.168.2.1.

3. Make sure the device is powered on.

4. Using a web browser on the computer, enter the device's IP address into the Location bar and press

ENTER. The device web page inter ace should load. I the web page inter ace ails to load, double

check the computer's network settings and physical Ethernet connections. In the event that the IP

address o the device is unknown, re er to the Unknown IP Address troubleshooting section.

1.4.2 Network Settings

Network settings can be changed on the Con ig tab o the Web Page Inter ace. This includes DHCP enable, IP

address, Netmask and Gateway settings. DHCP should only be used or assigning speci ic network settings

rom a central DHCP server or when assigned IP addresses can be determined, otherwise con iguring the device

via its IP address would be prevented i the IP address is unknown. A ter changing network settings, click the

Save button and then click the Reboot button to restart the device. Re er to the Con ig Tab - Network Settings

section or more details.

In the event that the device's IP address is unknown, re er to the Unknown IP Address troubleshooting section.

Re er to the Network Planning section or assistance with developing a network plan or multi-device

applications.

1.4.3 Matrix Routing

The Routing tab o the Web Page Inter ace provides a convenient way to view and change the matrix routing

state and is the de ault page shown.

A preset can also be recalled rom this inter ace, by selecting one rom the Load Preset drop down control.

Re er to the Routing Tab section or more details.

1.4.4 Labels

Labels can be assigned to video (and audio i applicable) sources and destinations. Labels can also be assigned

to presets. Labels can be up to 8 characters in length. The de ault source labels use “Src” as a pre ix, and the

destination labels use “Dest” as a pre ix (example: Src1). The presets are labeled “Startup” or Preset 0 and

“PresetN”, where N is a number rom 1 to 9, or the remaining presets.

MSC-XD1608L Product Manual

The Labels Tab on the Web Page Inter ace can be used or modi ying labels. Click the Save button to store any

changes that are made. Re er the Labels Tab section or more details.

1.4.5 Presets

There are 10 stored matrix routing presets. Preset 0 is recalled on power up and by de ault routes source 1 to all

destinations. All other presets de ault to “No Change” or all destinations, which when recalled will have no

e ect. Presets can assign a partial subset o destinations or all destinations as desired.

Presets can be modi ied on the Presets Tab o the Web Page Inter ace. Re er to the Presets Tab section or more

details.

1.4.6 Panel Remote Router IP Address

Remote panels control Matrix Switch Corporation video/audio routers with the TCP/IP protocol via the Ethernet

port.

NOTE: The button panel inter ace o a router device may also be used to remotely control a di erent router. In

that case the Control Mode selection setting is used to determine the mode o the panel inter ace.

The Remote Router P setting on the Con ig Tab o the Web Page Inter ace de ines the IP address o the

remote router which the panel inter ace will control. This de aults to 192.168.2.60 on remote panels, which is

the de ault IP address o Matrix Switch Corporation routers.

A ter changing the Remote Router P setting click the Save button to store the changes, which take e ect

immediately (a reboot is not required).

Re er to the Con ig Tab - Button Panel Settings section or more details on con iguring the Remote Router IP

Address.

Re er to the Network Planning section or more details on con iguring devices in multi-device applications.

1.5 Network Planning

The de ault device settings can be used without change in applications with a single router and optionally one

remote panel on the same Ethernet network. Larger installations or integration with existing IP LAN networks

require some network planning.

NOTE: Matrix Switch Corporation can assist in planning and pre-con iguring devices or speci ic application

requirements at purchase time. Just ask a sales or customer service representative.

Manual IP address management is recommended, although a DHCP server can be a convenient option or

centrally managing IP addresses by device MAC address, the net e ect still being a ixed IP or each device.

Consult your DHCP server documentation or in ormation on assigning IP addresses by MAC address, i this

option is chosen.

All devices which need to communicate with one another (routers, remote panels and computers) need to be

physically connected to the same LAN or allow IP packet routing between networks i on separate LANs.

SECUR TY WARN NG: Matrix Switch Corporation devices are meant or installation in trusted LAN

environments. In the event that remote device con iguration or control is desired over public networks or the

Internet, it is strongly recommended that some orm o inter-network security is utilized, such as irewalls and

encrypted VLAN or secure data tunnels. This is necessary to prevent undesired access to devices.

Inhaltsverzeichnis

Andere Matrix Switch Corporation Schalten Handbücher

Matrix Switch Corporation

Matrix Switch Corporation MSC-XV1616L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP8X4E Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD1632S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3208S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3224L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-V3248 Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DES Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-TXD44L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD0824L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD1624L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD42L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-5-3248 Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-1HD1616S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-5-6416 Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD88S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-5-1664 Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP8X8E Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD0832L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-TXD62L Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP16X1E Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD0824S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD1632S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-1HD0816S Bedienungsanleitung

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD164L Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung