Matrix SETU VFX88L Bedienungsanleitung

SETU VFX88L/VFX44L

Quick Start

SETU VFX88L/VFX44LSETU VFX88L/VFX44L

SETU VFX88L/VFX44L

8-Port VoIP to FXS Gateway with Lifeline

Quick Start

Thank you for choosing Matrix SETU VFX88L!

This Quick Start is meant to help you to install your SETU VFX88L and do

basic configurations to enable you to make and receive VoIP calls using it as

easily as a normal telephone call. For detailed information on installing and

configuring SETU VFX88L, please refer 'Matrix SETU VFX88L System

Manual' on CD-ROM provided to you with the product.

Know your SETU VFX88L

SETU VFX88L has 1 Ethernet port, 8 FXS ports, 1 Lifeline port, a Power

Socket and 10 LEDs.

Figure 1: Back Side Panel

RJ11

Computer

Router

Ethernet

Switch

12VDC 2A(Max)

ETHERNET FXS1 FXS2 FXS3 FXS4 FXS5 FXS6 FXS7 FXS8

LIFELINE

FXO

Figure 2: Front Side Panel

PWRF1F2F3F4

STS F5 F6 F7 F8

Before You Start

1. Verify Package Contents

Two Screw M 7/30

Two Screw Grip

Warranty Card Set

SETU VFX88L Adaptor 12V, 2Amp

(Country Specific)

CD containing System Manual,

Quick Start and User Card

Quick Start and User Card Ethernet Cable (RJ45)

Line Cord (RJ11)

Mounting Template

Make sure that all the above mentioned accessories are present when you

open the Sales Kit of SETU VFX88L. In case any of the part is missing or

damaged, contact the vendor/ITSP/system administrator from whom you have

purchased the system.

2. Get your Internet Connection ready

To install SETU VFX88L you must have:

• Broadband Internet Connection to make/receive calls through Public

Internet. If you want to make calls within your network, you do not

need an Internet connection.

• A SIP Account from an Internet Telephony Service Provider (ITSP). If

you want to make Peer-to-Peer calls (i.e. calls made without the

intervention of a SIP/Proxy server), you do not need the services of

an ITSP.

3. Get your Network Information ready

Ask your LAN Administrator/ISP for:

• Connection Type

• PPPoE User ID, Password and Service Name (in case of PPPoE

Connection type)

• IP Address

• Subnet Mask

• Gateway Address

• DNS Address

• DNS Domain Name

4. Get your SIP Account Information ready (if you want to make call

using SIP Account of an ITSP)

Ask your ITSP for:

• SIP ID/User ID

• Authentication User ID (in most cases same as SIP ID)

• Authentication Password

• Registrar Server Address

• Registrar Server Port

• Outbound Proxy Address

• Outbound Proxy Server Port

Installing SETU VFX88L

Precautions & Safety Instructions:

Take following precautions while installing SETU VFX88L to reduce the risk of

fire, electric shock and injury to the system as well as the person using it:

• Do not install the system where sulfuric gases are produced and do not

use the telephone to report a gas leak in the vicinity of the leak.

• Do not install the system at the places where shocks or vibrations are

frequent or strong.

• Do not install the system at dusty places or places where it may come in

direct contact with oil or water.

• Read and understand all the instructions given in the system manual

properly.

• Unplug the product from the wall outlet before cleaning and do not use

liquid cleaners. Use only dry and soft cloth.

• Do not open the system in power ON condition.

• To reduce the risk of electric shock or damage to the system, take the

product to the qualified serviceman when some repair work or servicing is

required. Removing covers or opening the system or incorrect reassembly

may cause electric shock when used subsequently.

Mounting the VFX88L on wall

• Select a suitable place on the wall for mounting the SETU VFX88L.

• Drill a hole of appropriate size.

• Insert the nail grip in the hole.

• Insert the screw and tighten it leaving the screw head a few millimeters

protruded of the wall.

• Check the strength of the nail.

• Hang the SETU VFX88L on the wall.

Applications:

1. In Small Office/Home office

Broadband

Router/Modem

PSTN

WAN

LifeLine

Port

FXS1

FXS2

FXS3

FXS8

SETU VFX88L

FXO6

FXS1

FXS2

FXS3

FXSn

FXO2

FXO1

FXO5

FXO7

FXOn

PBX

PSTN

2. In Corporate Office

PSTN

WAN

LifeLine

Port

SETU VFX88L

FXS1

FXOn

PBX

FXO2

FXO1 FXS1

FXS2

FXS3

FXSn

FXS2

Broa dband

Modem/Router

FXS8 FXO8

3. Peer to Peer Application-Corporate Users (Scenario-1)

IP N/w

Broadband

Modem/Router

Broadband

Modem/Router

WAN

SETU VFX88L

FXO1

FXO2

FXS1

FXS2

FXOn

FXS1

FXSn

PSTN

WAN

SETU VFX88L

FXS8

Head Office Branch Office

FXS1

PBX

FXO8 FXS8 LifeLine

PSTN

LifeLine

4. Peer to Peer Application-Corporate Users (Scenario-2)

IP N/w

Broadband

Modem/Router

WAN

SETU VFX88L

FXO1

FXO2

FXS1

FXS2

FXOn

FXS1

FXSn

PSTN

PBX

FXO8 FXS8 LifeLi ne

Broadband

Modem/Router

PSTN

FXO1

FXO2

FXOn

FXS1

FXSn

PBX

WAN

SETU VFX88L

LifeLine

FXS1

FXS2

FXS8 FXO8

Connecting SETU VFX88L

• Connect the Ethernet port of the SETU VFX88L to the Ethernet Port of the

broadband modem/LAN switch using an Ethernet cable provided with the

system.

• Connect FXS ports of SETU VFX88L to the telephone instrument/FXO

ports of PBX using RJ11 cables.

• Connect the PSTN line to the Lifeline FXO port when it is required to be

used.

• Connect the power adaptor to the SETU VFX88L.

Switching ON the SETU VFX88L

• Power the SETU VFX88L.

• The 10 LED's on the front panel display the events of FXS port/status of

SIP Accounts.

LED marked with F1-F8 represents FXS port LED and SIP Account (1-8)

Status LED.

LED marked with STS represents System Status LED.

LED marked with PWR represents Power LED. Power LED glows Red

when gateway is powered ON.

Following LED sequence would be observed during Power ON:

• All LEDs would be OFF.

• After around 2-3 minutes, all LEDs glow Green for 500msec, Red for 500

msec, Orange for 500msec.

• All LEDs would be OFF again.

• On successful completion of initialization cycle,

• STS LED will blink Green for 1sec ON-1sec OFF continuously.

• F1-F8 LED would be OFF.

After attaining the normal state, LED F1-F8 will show the status of its response

as shown below:

Event LED Colour LED Cadence

FXS Port Idle + SIP Active Green 200ms ON - 4800ms OFF

FXS Port Idle + SIP

Authentication Failed

Green 200ms ON - 200ms OFF

200ms ON - 4800ms OFF

Incoming Ring Event on FXS

port

Red 1000ms ON - 4000ms OFF

Off-hook Event on FXS port Red Continuous

Speech Red Continuous

Configuring the SETU VFX88L using the Web Interface

How to reach the Home Page of Web Server?

• Connecting the SETU VFX88L with the computer

• Connect the Ethernet Port of the SETU VFX88L to the Ethernet Port

of the Computer/LAN switch using the RJ-45 cable provided with the

system.

• To know the IP Address and Subnet Mask of the Ethernet port of the

computer go to: My Network Places





Properties





Local Area

Connection





Properties





Internet Protocol (TCP/IP)





Properties (For computers with windows 2000 and XP Operating

Systems).

• Follow below steps to change IP address and Subnet Mask of

Network port of SETU VFX88L such that computer and Network port

of SETU VFX88L are in same subnet.

Default IP address and Subnet Mask of Network port of SETU VFX88L

is 192.168.001.156 and 255.255.255.0 respectively.

Step 1: Entering into the Programming mode

• Pick up handset of telephone instrument connected to SETU

VFX88L.

• Dial #19-1234 (1234 is the default SE Password)

• You will hear Programming Tone.

Step 2: Assigning an IP Address

• Enter into the programming mode by following the step 1 i.e "Entering

into the Programming mode".

• Dial the SE command 11-IP Address-#*.

• For example, if the IP address 192.168.1.182 is to be programmed,

the SE command shall be given as, 11-192168001182-#*.

• SETU VFX88L will restart once you enter this command.

Step 3: Assigning Subnet Mask

• Enter into the programming mode by following the step 1 i.e "Entering

into the Programming mode".

• Dial the SE command 12-Subnet Mask-#*.

• For example, if the subnet mask 255.255.255.0 is to be programmed,

the SE command shall be given as, 12-255255255000-#*.

• SETU VFX88L will restart once you enter this command.

• Access the Webjeeves of the SETU VFX88L

• Open the Web browser/Internet Explorer.

• Enter the IP address of the SETU VFX88L Network Port in the URL

field of the Web browser/Internet Explorer and press Enter key.

• The SETU VFX88L will prompt for login as shown below:

• Enter the SE Password (default: 1234) in the 'Password' field.

• Click on the 'Login' button.

• On successful login, you will be taken to the Home Page.

Andere Handbücher für SETU VFX88L

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Matrix Tor Handbücher

Matrix

Matrix simado gfx11 Benutzerhandbuch

Matrix

Matrix SETU VFXTH Bedienungsanleitung

Matrix

Matrix SETU ATA211 SIP-FXS-FXO Benutzerhandbuch

Matrix

Matrix SETU VG Benutzerhandbuch

Matrix

Matrix SIMADO GFX44 Benutzerhandbuch

Matrix

Matrix SETU VGRX Benutzerhandbuch

Matrix

Matrix SIMADO GFX44 Benutzerhandbuch

Matrix

Matrix SIMADO GFX44 Bedienungsanleitung

Matrix

Matrix SETU VFX88L Benutzerhandbuch

Matrix

Matrix SETU VGFX Bedienungsanleitung

Matrix

Matrix SETU VFXTH Benutzerhandbuch

Matrix

Matrix SETU VFX Bedienungsanleitung

Matrix

Matrix SETU VTEP Bedienungsanleitung

Matrix

Matrix SETU VGFX Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung