MATSONIC MS6391E Bedienungsanleitung

Mainboard User’s Manual

This publication, including all photographs, illustrations and

software, is protected under international copyright laws, with all

rights reserved. Neither this manual, nor any of the material

contained herein, may be reproduced without the express written

consent of the manufacturer.

The information in this document is subject to change without

notice. The manufacturer makes no representations or warranties

with respect to the contents hereof and specifically disclaims any

implied warranties of merchantability or fitness for any particular

purpose. Further, the manufacturer reserves the right to revise this

publication and to make changes from time to time in the content

hereof without obligation of the manufacturer to notify any person

of such revision or changes.

Trademarks

IBM, VGA, and PS/2 are registered trademarks of International

Business Machines.

Intel, Pentium, Pentium-III, MMX, and Celeron are registered

trademarks of Intel Corporation.

Microsoft, MS-DOS and Windows 95/98/NT are registered

trademarks of Microsoft Corporation.

Sound Blaster is a trademark of Creative Technology Ltd.

PC-cillin and ChipAwayVirus are trademarks of Trend Micro Inc.

AMI is a trademark of American Megatrends Inc.

A3D is a registered trademark of Aureal Inc.

Gamut is a registered trademark of Formosoft International Inc.

SuperVoice is a registered trademark of Pacific Image

Communications Inc.

MediaRing Talk is a registered trademark of MediaRing Inc.

Other names used in this publication may be trademarks and are

acknowledged.

MS6391E, V1.3

S54T/JUNE 2000

MS6391E Mainboard User’s Manual

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

qReorient or relocate the receiving antenna.

qIncrease the separation between the equipment and the receiver.

qConnect the equipment onto an outlet on a circuit different from that

to which the receiver is connected.

qConsult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be

employed with this equipment to insure compliance with the pertinent RF

emission limits governing this device. Changes or modifications not

expressly approved by the system’s manufacturer could void the user’s

authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject

to the following conditions:

qThis device may not cause harmful interference, and

qThis device must accept any interference received, including

interference that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian

Interference-causing Equipment Regulations.

Cet appareilnumérique de la classeB respecte toutes les exigences du

Réglement sur le matériel brouilieur du Canada.

MS6391E Mainboard User’s Manual

III

Table of Contents

Chapter 1: Introduction..............................................................1

Key Features......................................................................2

Package Contents...............................................................5

Static Electricity Precautions...............................................6

Pre-Installation Inspection...................................................6

Chapter 2: Mainboard Installation...............................................7

Mainboard Components......................................................8

Install A CPU ....................................................................9

Install Memory.................................................................10

Setting Jumper Switches...................................................11

Install the Mainboard........................................................13

Install the Extension Brackets...........................................14

Install Other Devices........................................................20

Expansion Slots................................................................21

Chapter 3: BIOS Setup Utility..................................................23

Introduction.....................................................................23

Running the Setup Utility..................................................24

Standard CMOS Setup Page .............................................25

Advanced Setup Page.......................................................26

Power Management Setup Page ........................................28

PCI / Plug and Play Setup Page.........................................30

Load Optimal Settings ......................................................31

Load Best Performance Settings ........................................31

Features Setup Page .........................................................31

CPU PnP Setup Page........................................................33

Hardware Monitor Page....................................................34

Change Password.............................................................34

Exit..................................................................................35

Chapter 4 Software & Applications...........................................36

Introduction.....................................................................36

Using the PCI Sound Pro Application ................................36

The Four Speakers System................................................37

Speaker Installation ..........................................................37

Speaker Position...............................................................37

Mixer Setup .....................................................................38

Demo ..............................................................................38

MS6391E Mainboard User’s Manual

Appendix A: Gamut .............................................................A1

Introduction ....................................................................A2

Before Installation ..........................................................A3

Installation .....................................................................A4

Produce MP3 fileUse CD-Cashier ................................A5

Play MP3 filesUse Musician ........................................A7

Play music CDUse 3DFS-ACD .....................................A8

Play MIDI filesUse Midier ..........................................A9

Recording audio dataUse Voice-Catcher ....................A10

1: Introduction

Chapter 1

Introduction

This mainboard supports all Socket 7 processors including newer

designs which feature a 100 MHz system bus. The mainboard

firmware supports CPU Plug and Play so that the system will

automatically adopt the correct configuration for the Socket-7

processor that you install.

This mainboard uses the SiS540 chipset which integrates a 3D

AGP Graphics Acceleratorand has an embedded

10BaseT/100BaseTX Ethernet Network Interface.The

mainboard has a built-in PCI 3D Sound Systemand a V.90

Fax/Modem DAA module is shipped with the mainboard. There is

an ADIMM slot onboard for either an optional Video Bridge Card

or a display buffer cache card. The video bridge card connects to

an external TV, a TFT LCD panel display, or a secondary CRT

display monitor. In addition, the mainboard has a full set of I/O

Ports and two expansion slots.

This mainboard has all the features you need to develop a powerful

multimedia workstation that is network ready, and has built-in

communications. The board is Baby-AT form factor and supports

both AT/ATX power supply. If you use an ATX supply, it

supports all of the ATX power management features including

ACPI (Advanced Configuration and Power management Interface),

power saving modes and keyboard power on hot keys feature.

MS6391E Mainboard User’s Manual

Key Features

The key features of this mainboard include:

Socket-7 Processor Support

♦Supports all recent socket-7 processors including the Intel

P55C (Pentium MMX), the Cyrix/IBM 6x86L/6x86MX

/MII, the AMD K6/K6-2/K6-III, IDT C6, and WinChip

2/2A CPUs

♦Supports socket-7 processors with system bus frequencies

of 66/100 MHz

♦CPU Plug and Play support lets the firmware

automatically configure the CPU

Memory Support

♦Two DIMM slots for 168-pin SDRAM memory modules

♦Support for 66MHz, 100MHz memory bus

♦Maximum installed memory is 2 x 512MB = 1 GB

Expansion Slots

♦Two 32-bit PCI slots

♦One ADIMM slot for optional display cache card or video

bridge card

Onboard IDE channels

♦Primary and Secondary PCI IDE channels

♦Support for PIO (programmable input/output) modes

♦Support for Multiword DMA modes

♦Support for Bus Mastering and Ultra DMA 33/66 modes

Power Supply and Power Management

♦Provides AT/ATX power connector

♦ACPI and previous PMU support, suspend switch,

keyboard power on/off

♦Supports Wake on Modem, Wake on LAN and Wake on

Alarm

1: Introduction

Built-in Graphics System

♦Onboard 128-bit 2D/3D 100MHz Host interface AGP

Graphics Accelerator Complies with AGP V2.0

♦Shared memory architecture allows a maximum of 64 MB

main memory to act as frame buffer

♦Supports high resolutions up to 1920x1200 16M colors, up

to 2048x2048 Texture size and Virtual screen up to

4096x4096

♦Supports hardware DVD Accelerator

Sound System

♦Complies with the PC98 audio specification

♦16-bit CODEC for full-duplex playback and recording

♦HRTF 3D professional audio supports both Direct Sound

3D®and A3D®-compatible interfaces plus support for 4-

channel speakers

♦Driver support for MS-DOS, Microsoft Windows

95/98/2000/NT 4.0

♦Built-in 32ohm earphone buffer and 3D surround sound

♦Provides MPU-401 Game/MIDI port and legacy Sound

Blaster 16 support

♦Downloadable Wave-table Synthesizer supports Direct

Music®

♦Stereo Mixer supports analog mixing from CD-Audio and

Line In or digital mixing from voice, FM/Wave-table and

digital CD-Audio

MS6391E Mainboard User’s Manual

Onboard I/O Ports

♦Provides PC99 Color Connectors for easy peripheral device

connections

♦Floppy disk drive connector with 1Mb/s transfer rate

♦One serial port with 16550-compatible fast UART

♦One parallel port with ECP and EPP support

♦Optional ATX Form card provides two USB ports, a PS/2

port for mouse and a infrared port

Built-in Ethernet LAN

♦10BaseT/100BaseTX Ethernet LAN

♦LAN controller integrates Fast Ethernet MAC and PHY

compliant with IEEE802.3u 100BASE-TX, 10BASE-T and

ANSI X3.263 TP-PMD standards

♦Compliant with ACPI 1.0 and the Network Device Class

Power Management 1.0

♦High Performance provided by 100Mbps clock generator

and data recovery circuit for 100Mbps receiver

Fax/Modem DAA Module

♦56 Kbps Fax/Modem DAA module

♦Supports V.90, V.34, V.32bis, V.32, V.22bis, V.22

♦Supports Auto Fallback and MNP 5, V.42bis data

compression with 115,200-compatible Virtual UART

♦Requires 16MB RAM and Microsoft Windows 95/98/NT

Onboard Flash ROM

♦Automatic CPU and board configuration

♦Supports Plug and Play configuration of peripheral devices

and expansion cards

♦Built-in virus protection using Trend’s ChipAwayVirus

provides boot process virus protection.

1: Introduction

Bundled Software

♦PC-Cillin provides automatic virus protection under

Windows 95/98

♦SuperVoice is data, fax and voice communication software

♦Gamut provides professional audio features included MP3

encoding/playback

♦MediaRing Talk provides PC to PC or PC to Phone

internet phone communication

♦S-YXG50 is music synthesizer software to playback MIDI

files on the system

Dimensions

♦Baby-AT form factor (22cm x 22cm)

Package Contents

Your mainboard package ships with the following items:

qThe mainboard

qThis User’s Guide

q1 UDMA/66 IDE cable

q1 Floppy disk drive cable

qAudio ports and Game/MIDI port extension bracket

qSerial/parallel ports extension bracket

qVGA extension bracket

qSupport software on CD-ROM disc

MS6391E Mainboard User’s Manual

Optional Accessories

You can purchase the following optional accessories for this

mainboard.

qFax/Modem DAA module

qATX Form card (2 USB ports, IR port & PS/2 mouse Port)

q10BaseT/100BaseTX network adapter extension bracket

qSiS301 video bridge card

q8/32 MB display cache card

Static Electricity Precautions

Components on this mainboard can be damaged by static

electricity. Take the following precautions when unpacking the

mainboard and installing it in a system.

1. Keep the mainboard and other components in their original

static-proof packaging until you are ready to install them.

2. During installation, wear a grounded wrist strap if possible. If

you don’t have a wrist strap, discharge static electricity by

touching the bare metal of the system chassis.

3. Handle the mainboard carefully by the edges. Avoid touching

the components unless it is absolutely necessary. During

installation put the mainboard on top of the static-protection

packaging it came in with the component side facing up.

Pre-Installation Inspection

1. Inspect the mainboard for damage to the components and

connectors on the board.

2. If you suspect that the mainboard has been damaged, do not

connect power to the system. Contact your mainboard vendor

and report the damage.

Inhaltsverzeichnis

Andere MATSONIC Hauptplatine Handbücher

MATSONIC

MATSONIC MS9017C Bedienungsanleitung

MATSONIC

MATSONIC MS9027C Bedienungsanleitung

MATSONIC

MATSONIC MS6380SG Bedienungsanleitung

MATSONIC

MATSONIC MS7167D Bedienungsanleitung

MATSONIC

MATSONIC MS6393E Bedienungsanleitung

MATSONIC

MATSONIC MS7380SG Bedienungsanleitung

MATSONIC

MATSONIC MS9158 Series Bedienungsanleitung

MATSONIC

MATSONIC MS7192S Bedienungsanleitung

MATSONIC

MATSONIC MS9107C Bedienungsanleitung

MATSONIC

MATSONIC MS7192SM Bedienungsanleitung

MATSONIC

MATSONIC MS9307C Series Bedienungsanleitung

MATSONIC

MATSONIC MS7023D Bedienungsanleitung

MATSONIC

MATSONIC MS7132A Bedienungsanleitung

MATSONIC

MATSONIC MS8328E Series Bedienungsanleitung

MATSONIC

MATSONIC MS9077C Bedienungsanleitung

MATSONIC

MATSONIC MS7102C Bedienungsanleitung

MATSONIC

MATSONIC MS7117C Bedienungsanleitung

MATSONIC

MATSONIC MS9087C Bedienungsanleitung

MATSONIC

MATSONIC MS7191SM Bedienungsanleitung

MATSONIC

MATSONIC MS9138E Series Bedienungsanleitung

MATSONIC

MATSONIC MS7057CT Bedienungsanleitung

MATSONIC

MATSONIC MS7112C Bedienungsanleitung

MATSONIC

MATSONIC MS7177C Bedienungsanleitung

MATSONIC

MATSONIC MS7177CT Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung