MAXDATA PLATINIUM 9000-2R Bedienungsanleitung
User‘s Manual
MAXDATA PLATINUM 9000-2R Server
2Contents
3
MAXDATA PLATINUM 9000-2R Server
2Contents
3
MAXDATA PLATINUM 9000-2R Server
Contents
Safety Precautions 5
Safety Steps ...........................................................................................................................................5
1 Specifications and Disclaimers 7
Declaration of the Manufacturer ............................................................................................................8
Safety Compliance .................................................................................................................................8
Electromagnetic Compatibility (EMC).....................................................................................................8
Laser Compliance Notice .......................................................................................................................8
Electromagnetic Compatibility Notices (International)............................................................................8
Europe (CE Declaration of Conformity) .............................................................................................8
2 Setting up the system 9
Removing the Server from the Box........................................................................................................9
Selecting a Site.......................................................................................................................................9
Checking Power Cords.........................................................................................................................10
Connections and Controls ....................................................................................................................11
Connecting the Monitor, Keyboard, and Mouse ..................................................................................15
Powering On the Server for the First Time ..........................................................................................15
Mounting the DVD/CD-RW Device ......................................................................................................16
The MAXDATA PLATINUM 9000-2R Server Resource CD..................................................................17
The MAXDATA PLATINUM 9000-2R Server Product Guide ................................................................17
Figures
1. MAXDATA PLATINUM 9000-2R Server ............................................................................................7
2. Chassis Front View..........................................................................................................................11
3. Front View of MAXDATA PLATINUM 9000-2R Server (Shown with Bezel Removed) ..................11
4. Front Panel View .............................................................................................................................12
5. Chassis Back Features ...................................................................................................................14
Tables
1. MAXDATA PLATINUM 9000-2R Server Physical Specifications.......................................................7
2. Front Panel Control and Indicator Description.................................................................................12
3. Back Panel Features........................................................................................................................14
4Contents
5
MAXDATA PLATINUM 9000-2R Server
Safety Precautions
The Following safety symbols are used in this manual:
WARNING
Failure to follow these guidelines may result in personal injury or even death
CAUTION
Failure to follow these guidelines may result in damage to the system or its
components
NOTE General usage tips
WARNINGS
The power supply in this product contains no user-serviceable parts. There may be more than one
supply in this product. Refer servicing only to qualified personnel.
Do not attempt to modify or use the supplied AC power cord if it is not the exact type required. A
product might be equipped with more than one AC power cord.
The power button on the system does not turn off all system AC power. To remove all AC power
from the system, you must unplug each AC power cord from the wall outlet or power supply.
To avoid injury from electrical and mechanical hazards, chassis covers should only be removed by
qualified service personnel.
Safety Steps
Whenever you remove the chassis covers to access the inside of the system, follow these steps:
1. Turn off all peripheral devices connected to the system.
2. Turn off the system by pressing the power button.
3. Unplug all AC power cords from the system or from wall outlets.
4. Label and disconnect all telecommunication cables and all other cables connected to
I/O connectors or ports on the back of the system.
5. Provide some electrostatic discharge (ESD) protection by wearing an anti-static wrist
strap attached to chassis ground of the system – any unpainted metal surface – when
handling components.
6. Do not operate the system with the chassis covers removed.
After you have completed the six safety steps above, remove the covers as follows:
1. To open the top back cover, push the sliding latches on the top of the cover and pull the
cover toward the back of the chassis.
2. To remove the top back cover, continue to slide the cover toward the back of the chassis
until it reaches the end-stops. Press the latch on the left rail slide and pull the cover until it
clears the chassis.
3. To remove the top front cover, loosen the two captive screws on either side of the cover,
slide the cover toward the front of the chassis until it stops, then lift the cover off.
4. Always replace the covers before operating the system.
6Safety Precautions
CAUTION
For proper cooling and airflow, unless hot swapping PCI cards or fans, always reinstall the chassis
covers before turning on the system. Operating the system without the covers in place can damage
system parts. To install the covers:
1. Check first to make sure you have not left loose tools or parts inside the system.
2. Check that cables, add-in boards, and other components are properly installed.
3. To replace the top back cover, slide the two bearing cages on the back top cover all
the way to the end of the slides.
4. Place the top cover on the cover slides and push the cover into place.
5. To replace the top front cover, attach the back edge of the front top cover to the chassis,
lower the front edge of the cover onto the chassis, then push the cover into place.
6. Tighten the two captive screws on either side of the cover.
7. Connect all external cables and the AC power cord(s) to the system.
WARNING
A microprocessor and heat sink might be hot if the system has been running. Also, there might be
sharp pins and edges on some board and chassis parts. Contact should be made with care. Consider
wearing protective gloves.
WARNING
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s
instructions.
The system is designed to operate in a typical office environment. Choose a site that is:
• Clean and free of airborne particles (other than normal room dust).
• Well-ventilated and away from sources of heat including direct sunlight.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical devices.
• Protected when in regions that are susceptible to electrical storms. We recommend you
plug your system into a surge suppresser and disconnect telecommunication lines to your
modem during an electrical storm.
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cords, because they serve as
the product’s main power disconnect.
WARNING
Servers can be too heavy for a single person to lift or move safely. Depending on the server, use two
people or a mechanical assist to lift or move the server.
7
MAXDATA PLATINUM 9000-2R Server
1 Specifications and Disclaimers
Server Specifications
Table 1. MAXDATA PLATINUM 9000-2R Server Physical Specifications
Specification Value
Height 3.4 inches (87 mm)
Width 17.7 inches (449 mm)
Depth 29.4 inches (747 mm)
Front clearance 3 inches (76 mm)
Side clearance 1 inch (25 mm)
Rear clearance 6 inches (152 mm)
Weight 65 lbs (30 kg)
The system weight listed above is an estimate for a fully configured system and will vary depending
on number of peripheral devices and add-in cards as well as the number of processors and DIMMs
installed in the system.
Figure 1. MAXDATA PLATINUM 9000-2R Server
8Specifications and Disclaimers
Declaration of the Manufacturer
We hereby certify that this product is in compliance with European Union EMC Directive 89/336/EEC,
using standards EN55022 (Class A) and EN55024 and Low Voltage Directive 73/23/EEC, Standard
EN60950.
Safety Compliance
Europe Low Voltage Directive, 73/23/EECTUV/GS to EN60950 2nd Edition with
Amendments, A1 = A2 + A3 + A4
Electromagnetic Compatibility (EMC)
Europe EMC Directive, 89/336/EEC
• EN55022, Class A Limit, Radiated & Conducted Emissions
• EN55024, ITE Specific Immunity Standard
• EN61000-4-2, ESD Immunity
(Level 2 Contact Discharge, Level 3 Air Discharge)
• EN61000-4-3, Radiated Immunity (Level 2)
• EN61000-4-4, Electrical Fast Transient (Level 2)
• EN61000-4-5, AC Surge
• EN61000-4-6, Conducted RF
• EN61000-4-8, Power Frequency Magnetic Fields
• EN61000-4-11, Voltage Dips and Interrupts
• EN61000-3-2, Limit for Harmonic Current Emissions
• EN61000-3-3, Voltage Flicker
Laser Compliance Notice
MAXDATA products that use laser technology comply with Class 1 laser requirements.
Class 1 Laser Product
Luokan 1 Laserlaite
Klasse 1 Laser Apparat
Laser Klasse 1
NOTE
Class A device definition: If a Class A device is installed within this system, then the system is to be
considered a Class A system. In this configuration, operation of this equipment in a residential area
is likely to cause harmful interference.
Electromagnetic Compatibility Notices (International)
Europe (CE Declaration of Conformity)
This product has been tested in accordance too, and complies with the Low Voltage Directive (73/23/
EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark to illustrate
its compliance.
9
MAXDATA PLATINUM 9000-2R Server
2 Setting up the system
Removing the Server from the Box
Carefully unpack the server. Be sure to use two people to lift the server. Do not attempt to lift or move
the server by the handles on the power supplies. If you need to move the server from one location
to another, use a hand-truck or other mechanical assist unit.
WARNING
Avoid injury: To avoid personal injury when unpacking the server, use only a mechanical assist unit
to lift it off the shipping pallet. The maximum server configuration weighs 30 kg.
Selecting a Site
The server operates reliably within normal office environmental limits. Select a site that meets these
criteria:
• Near a properly earthed, grounded three-pronged power outlet
– In the United States and Canada: A NEMA-compliant, 110-208V~ outlet rated for
15 amps
– In other geographic areas: A properly grounded, earthed outlet in accordance with
the local electrical authorities and electrical code of the region
• Clean and relatively free of excess dust
• Well ventilated and away from sources of heat, with the ventilating openings on the
server kept free of obstructions.
• Away from sources of vibration or physical shock
• Isolated from strong electromagnetic fields and noise caused by electrical devices such
as elevators, copy machines, air conditioners, large fans, large electric motors, radio and
TV transmitters, and high-frequency security devices
CAUTION, ESD Precautions
Electrostatic discharge (ESD) can damage disk drives, add-in boards, and other parts. This server can
withstand normal levels of environmental ESD. However, we recommend doing all procedures in
this guide only at an ESD-protected workstation. If one is not available, you can provide some ESD
protection by wearing an anti-static wrist strap attached to chassis ground of the server when handling
components (e.g., any unpainted metal surface).
CAUTION
Grounded outlet: Make sure that the power service connection is through a properly grounded outlet.
Temperature: The range of temperatures in which the server operates when installed in an equipment
rack, must not go below 5° C (41° F) or rise above 35° C (95° F). Extreme fluctuations in temperature
can cause a variety of problems in your server.
Ventilation: The equipment rack must provide sufficient airflow to the front of the server to maintain
proper cooling. The rack must also include ventilation sufficient to exhaust a maximum of 1500 W
(5,100 BTU/hr) for the server. The rack selected and the ventilation provided must be suitable to the
environment in which the server will be used.
10 Setting up the system
11
MAXDATA PLATINUM 9000-2R Server
Checking Power Cords
WARNING
The Power button on the front control panel of the server does not completely remove AC power.
To completely remove AC power from the server, you must unplug both AC power cords from the
system or from the wall outlet. Unplugging the cords removes the +12 Volt standby power that is
present when the server is powered down.
WARNING
Do not attempt to modify or use an AC power cord that is not the exact type required. You must use
a power cord that meets the following criteria:
1. Rating: For U.S./Canada cords must be UL Listed/CSA Certified, 16/3, 75C type, VW-1,
SJT/SVT, with NEMA 5-15P or NEMA 6-15P attachment plug and IEC 320 C13 input power
connector rated 15 amps. For outside U.S./Canada cords must be flexible harmonized
(<HAR>) rated 250V, 1.0 mm minimum conductor size with IEC 320 C13 input power
connector and rated for no less than 10 amps.
2. AC Attachment Connector, wall outlet end for outside U.S./Canada: The AC wall
attachment plug should be a three conductor grounding type, rated at 125 V, 15 amps and
must be for the configuration of the specific region or country. The AC wall attachment
plug must bear at least an accepted safety agency certification mark for the specific
region or country.
3. Input Power Connector, server end: The connectors that plug into the AC receptacles
on the server must be an IEC 320, sheet C13, type female connector and are rated for
125V/250V, 15 A.
NOTES
Surge Suppressor Recommendations: In geographic regions that are susceptible to electrical storms,
we highly recommend that you plug the server into a surge suppressor.
EMI Information: For information about complying with electromagnetic interference regulations,
see “Electromagnetic Compatibility” in the MAXDATA PLATINUM 9000-2R Server System Product-
Guide.
Inhaltsverzeichnis
Andere MAXDATA Server Handbücher
MAXDATA
MAXDATA PLATINUM 3200 I M5 Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 2200 IR Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 9000-4R Bedienungsanleitung
MAXDATA
MAXDATA PLATINIUM 9000-4R Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 5220 Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 50 I M1 Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 200 I Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 220 Benutzerhandbuch
MAXDATA
MAXDATA PLATINUM 2200 IR Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 3200 I M5 Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 400 IR Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 520 Benutzerhandbuch
MAXDATA
MAXDATA PLATINUM 2200 IR Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 1500 IR M5 Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 1500 IR M5 Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 300 IR Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 1600 IR Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 500 I Benutzerhandbuch
MAXDATA
MAXDATA PLATINUM 7200 IR Bedienungsanleitung
MAXDATA
MAXDATA PLATINUM 500 I Benutzerhandbuch
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung