maxfun MX-BT30 Betriebsanleitung
MX-BT30 USE GUIDE
Overview
The stereo headset is a Bluetooth enabled headset that provides users with the dual
capability of listening to music in a wireless mode as well as answering phone calls that
can be transferred to the headset from their Bluetooth enabled cell phone, even when
music is being streamed. The music source for this headset can be any consumer device
such as a mobile phone, PC, Music system, or an in-car entertainment system that is
compliant with the Bluetooth specification version 1.1 and 1.2 and support the Advanced
Audio Distribution profile (A2DP).
The headset can also be used with cell phones that are compliant with the Bluetooth
specification version 1.1 and 1.2 and support either the Headset or Handsfree Profiles.
The headset use CSR BC03 multimedia solution is based on BC352239A.
Summary:
MX-BT30 the stereo Bluetooth headset buttons picture and function operation :
A. POWR/TELL button : Implement power on/power off / Paring / Placing Call (Voice
Dial/LastNo.Redial)/AnswerCall/EndCallfunction.
B. + Vol - button : Implement volume up /volume down adjustment function.
C. FF/REW button: Implement Previous track / Next track function.
D. PLAY/PAUSE button: Implement Play/Pause function.
Power on
When the Bluetooth stereo headset power off state, Press and hold “POWR/TELL” for 3
Seconds power on. When power on, the headset will attempt to connect last paired AG. And in
the standby mode, press volume button to connecting last paired AV source.
The Bluetooth stereo headset will turn off if no paired device in 10 minutes.
Power off
When the Bluetooth stereo headset any state, Press and hold “POWR/TELL” for 3 Seconds
power off
Reset
The Bluetooth stereo headset is off.
1. the headset will be Resetted, when plug into USB connector for charging
2. the headset will be turned off
3. the headset can be power on after plug into the USB Connector
Pairing
1. Keep the distance between Bluetooth stereo headset and mobile phone inside two meter
2. Make sure Bluetooth Stereo Headset is off
3. Press and hold “POWR/TELL” for 6 seconds until the headset LED alternately flash green
and orange.
4. Perform a device discovery from the phone.
5. Select “MX-BT30” to add this Bluetooth device into the list of paired devices
6. enter the passkey “0000” and your mobile phone will show you whether pairing is
complete.
Answer Call
The Bluetooth stereo headset is power on and that link mobile telephone andAV dongle.
Short Press “POWR/TELL”. When the headset in the state that AV stream exist, if there’s a
incoming call, the headset will pause the AV stream automatically and starts ring tone. If the
end user’s pressing “POWR/TELL”, the call is answered, after calling, the headset resume the
AV stream.
End Call
When the Bluetooth headset in the state Voice Call in Progress, Short Press “POWR/TELL”.
Reject Call
When the Bluetooth headset in the state Incoming Voice Call, Press and hold
“POWR/TELL” button for 3 seconds during incoming call.
Voice Dial
The Bluetooth stereo headset is power on and that link mobile telephone.
When the Bluetooth headset in the state standby, Short Press “POWR/TELL” button
Last Number Redial
The Bluetooth stereo headset is power on and that link mobile telephone.
When the Bluetooth headset in the state standby, Rapidly Short Press “POWR/TELL” twice.
Call Transfer from Stereo Headset to mobile phone
When the Bluetooth headset in the state Voice Call in Progress, and voice is with Stereo
Headset. Press “V+” and “V-“together for 3 seconds
Call Transfer from mobile phone to Stereo headset
When the Bluetooth headset in the state Voice Call in Progress, voice is with mobile phone.
Short Press “POWR/TELL”
Adjust Volume
When the Bluetooth headset in the state Voice Call in Progress, Short Press “V+” to increase
volume ;Short Press “V-“ to decrease volume.
Connect to USB AV Dongle
1. Switch on the headset into Pairing mode
2. Plug in USB AV Dongle to PC
3. The USB AV Dongle Automatically pairing and connect to Headset
4. The headset LED flash green
5. Headset will listen to stereo audio from PC
Connect to USB Dongle
1. Installation Bluesoleil software
2. Start-up the Bluesoleil.
3. Plug in USB Dongle to PC
4. Switch ON the headset into Pairing mode
5. Find Remote Devices.
6. Choose the headset device. Enter passkey “0000”.
7. The headset LED flash blue
8. Choose connect AV profile
9. Headset will listen to stereo audio from PC The USB Dongle pairing and connect to
Headset (please refer to USB Dongle) User Guide)
Play/Pause
The Bluetooth stereo headset is power on and that link USB dongle or USBAV dongle
When the Bluetooth headset in the state Streaming, Short press “Play/Pause”.
Previous track
The Bluetooth stereo headset is power on and that link USB dongle or USBAV dongle.
When the Bluetooth headset in the state Streaming, Short press “FF”
Next track
The Bluetooth stereo headset is power on and that link USB dongle or USBAV dongle.
When the Bluetooth headset in the state Streaming, Short press “REV”
Alarm
When the Battery voltage shortage, The LED Flashes Orange. Listen to 3 beeps every 30
seconds
With should carry through charging.
Charging
When the headset is dead or when the Battery voltage shortage,
Please plug into the USB connector for charging .The LED light constant orange;
when the Battery voltage is full, The LED light constant green.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.
Electricity parameter
Item parameter
standard Bluetooth specification V2.0 compliant
Availability scope 10 meter widen without obstacle
audio frequency range 20Hz~22kHz
Frequency Band ISM 2.402~2.480GHZ
connect dot to dot
Talk time 13 hours
Standby time 110 hours
Power on without
pairing
10 minutes power off automatically
RF POWER 0 dbm ( Class 2 )
Talk current 20-25 mA
Battery capacity Polymer lithium-ion battery 3.7V 330mAh. Charging repeat
Charging connect Mini 5 pin USB
Charging Time 2~3 hours
Operation Temperature -10 ℃to 60 ℃
Saving Temperature -20 ℃to 85 ℃
Matching code 0000
Operation Voltage 3.0V~4.2V
Receive sensitivity -70 dbm
Indication Summary
Stereo
Headset State LED Indication Tone Indication
Off Off No
Turn On Green LED turn on 3 seconds Short Beep
Turn Off Orange LED turn on 3 seconds Long Beep
Standby(paired device) Green LED Blinks once in 4
seconds No
Pairing Mode Flashes Green and Orange
alternatively
No
Pairing completed Blink once in 4 seconds Long Beep
Call in progress Green LED Blinks once in 15
seconds No
Low Battery Orange LED Blinks once in 4
seconds 3 beeps every 30 seconds
Charging When POWER Turns off:
1.Orange LED is on when
charging is in progress;
2.When the battery is full, the
Orange LED turns off,
Green LED is turns on.
No
Andere Handbücher für MX-BT30
1
Andere maxfun Headset Handbücher
