model no. 054-3213-8 | contact us 1-888-670-6682
6 7
TM
• Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing
protection will reduce personal injuries.
• Avoid accidental starting.Ensuretheswitchisinthe“off”positionbefore
connecting to a power source and/or battery pack, or picking up or carrying the
tool. Carrying power tools with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A
wrench or key left attached to a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Always wear eye and
ear protection and use a dust mask. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are used for dust extraction and collection, ensure these devices are
connected and used properly. Use of dust collection devices can reduce dust-
related hazards.
• Do not use on a ladder or unstable support. Stable footing on a solid surface
allows for better control of the power tool in unexpected situations.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do a better and safer job if used for the function it was
designed for.
• Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
the power tool. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools with care. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power
tool’s operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc., in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
BATTERY TOOL USE AND CARE
• Ensure the switch is in the “off” position before inserting the battery pack.
Insertingthebatterypackintopowertoolsthathavetheswitch“on”invitesaccidents.
• When recharging, use only the charger that is specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
• Use only specifically designated battery packs with power tools. The use of any
other battery pack may create a risk of injury or fire.
• When the battery pack is not in use, keep it away from objects that can create
a connection between the terminals, such as paper clips, coins, keys, nails,
screws or other small metal objects. Short-circuiting the battery terminals may
cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
seek medical help. Liquid ejected from the battery may cause irritation or burns.
SERVICE
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tools is
maintained.
• When servicing a tool, use only identical replacement parts. Follow the
instructions in the Maintenance section of this manual. The use of unauthorized
parts or failure to follow maintenance instructions may create a risk of electric
shock or injury.
SPECIFIC SAFETY RULES FOR CORDLESS IMPACT DRIVER
• Hold power tools by insulated gripping surface when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact with
a“live”wirewillalsomakeexposedmetalpartsonthetool“live”andshockthe
operator.
•
Wear hearing protection with impact driver. Exposure to noise can cause hearing loss.
• Wear safety goggles or other eye protection. Hammering and drilling
operations cause chips to fly. Flying particles can cause permanent eye damage.
• Use a dust mask or respirator for applications if the operation is dusty.
• Use protective gloves and limit the exposure time by taking frequent rest
periods. Vibration caused by hammer-drill action may be harmful to your hands
and arms.
• Secure the workpiece. Clamping devices or a vise will hold the workpiece in place
better and more safely than holding it by hand.
• Be aware that this tool is always in an operating condition, since it does not have to
be plugged into an electrical outlet.
• Be prepared for a reaction torque when “seating” or removing a fastener. The
screwdriver housing may tend to twist in the opposite direction of bit rotation when
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
