MAXPhotonics MFSC Bedienungsanleitung
Maxphotonics Co.,Ltd.
MFSC 2000W-3000W (Chassis Type) Single Module CW Fiber Laser
Copyright Notation
Copyright © Maxphotonics Co ., Ltd ( here after referred to as Maxphotonics). All
rights reserved. You may not copy, modify, transmit or publish this publication,
in any form, in any media or by any means, without the prior written permission
of Maxphotonics, except as allowed under applicable copyright laws. Permitted
copies shall bear the same copyright and proprietary notices that were contained
on the ori ginal version.
Maxphotonics believes that the information provided is accurate and reliable;
however Maxphotonics makes no warranty, representation,expression or
implication that this document can be used as reference in other occasions.
Furthermore, Maxphotonics does not assume responsibility for any infringement
of patents or other rights of third parties due to use of the information contained
in this document. Maxphotonics shall not be liable for errors contained in this
document or for direct or indirect damages of relevant equipment.
Maxphotonics and the Maxphotonics Logo are registered trademarks of
Maxphotonics Co., Ltd., and the Logo does not break any regulations of
Trademark law.Maxphotonics grants no rights for patent or other intellectual
property mentioned herein.
All information contained in this document is subject to change and revision
without notice.
Subject to change without notice.
Maxphotonics Co.,Ltd.
Address: Maxphotonics Industrial Park, 3rd Furong Road,
Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125
E-Mail: [email protected]
http://en.maxphotonics.com
1
Preface
Thank you for using the MFSC Series CW fiber laser from Maxphotonics.We
compile this document for you in order that the laser is used and maintained
properly. Due to the limited level of the writers, coupled with time constraints,
there are some careless mistakes in this document, your understanding and
suggestion to help us make an improvement will be much appreciated . Thank
you again for using Maxphotonics' products.
Please take time to read and understand this User’s Guide《MFSC 2000W-3000W
(Chassis Type) Single Module CW Fiber Laser》and familiarize yourself with the
operating and maintenance instructions before you use the product. We strongly
recommend that the operator read the Section 2 titled “Safety Information” prior
to op erating the product.
This User’s Guide should stay with the product to provide you and all future
users and owners of the product with important operating, safety and other
information.
We identify the parts to which you need to pay special attention in the document
with underscore. Please notice those information to prevent the unnecessary
damages.
2
Company Prole
Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in
China. It is also the first in China to realize independent intellectual property
rights and vertical integration in the core technologies of ber lasers and optical
devices. One of the national high-tech enterprises. Maxphotonics has developed
into an internationally renowned laser manufacturer that develops, manufactures
and sells fiber lasers and core optical components. It is the second largest
domestic ber laser manufacturer in the domestic market.
Maxphotonics specializes in the research, development, production and sales of
ber lasers, including pulsed ber lasers, continuous ber lasers and direct diode
lasers. It also implements pump sources, combiners, fiber gratings, isolators,
laser output heads, and stripping. Optical devices such as molds, acousto-optic
modulators, and pattern matchers are produced autonomously. Products are
widely used in marking, engraving, cutting, drilling, cladding, welding, surface
treatment, rapid prototyping and additive manufacturing processes.
More informations，please visit our website：
http://en.maxphotonics.com
CONTENT 3
Company Prole ……………………………………………………………… 2
Chapter 1 Characteristic Description …………………………………… 5
Chapter 2 General Safety Information …………………………………… 6
1-Safety Conventions …………………………………………………………… 6
2-Laser Protection ……………………………………………………………… 7
3-Reference Standard ………………………………………………………… 8
4-General Safety Instructions ………………………………………………… 9
5-Additional Safety Information ……………………………………………… 14
Chapter 3 Product Description ……………………………………………… 15
1-Features………………………………………………………………………… 15
2-Module Conguration ………………………………………………………… 15
3-Laser Model Designation Codes …………………………………………… 15
4-Certication …………………………………………………………………… 16
5-Front Panel Description ……………………………………………………… 16
6-Back Panel Description ……………………………………………………… 17
7-Optical Output Terminal ……………………………………………………… 17
Chapter 4 Specication ……………………………………………………… 18
1-Optical Characteristic Parameters ………………………………………… 18
2-General Characteristic Parameters ………………………………………… 19
3-Water Cooling Condition……………………………………………………… 19
4-QBH Water Cooling Condition ……………………………………………… 20
5-Installation Environment Requirements …………………………………… 21
CONTENT
4
6-Structural Layout ……………………………………………………………… 23
Chapter 5 Unpacking Guide ………………………………………………… 24
1-Unpacking Steps ……………………………………………………………… 24
2-Packing List …………………………………………………………………… 25
Chapter 6 Operation Guide…………………………………………………… 26
1-Notice …………………………………………………………………………… 26
2-Electrical Power Connection ………………………………………………… 26
3-Extension Interface …………………………………………………………… 27
4-Start Steps……………………………………………………………………… 28
5-Mode Description ……………………………………………………………… 28
6-Software Description ………………………………………………………… 30
7-Error List ……………………………………………………………………… 34
Chapter 7
Fiber Connector Inspection and Cleaning Guide
…………… 35
1-Notice …………………………………………………………………………… 35
2-Operating Procedures………………………………………………………… 36
Chapter 8 Service and Maintenance ……………………………………… 40
1-Maintenance Notes …………………………………………………………… 40
2-Service Statements …………………………………………………………… 41
Chapter 9 Warranty Statements …………………………………………… 42
1-General Items ………………………………………………………………… 42
2-Warranty Limitations ………………………………………………………… 42
5
Chapter 1
Characteristic Explain
MFSC 2000W-3000W (Chassis Type) Single Module CW Fiber Laser is
developed by
Maxphotonics, provide a wide range of wavelength from 1060nm to 1100nm. The
lasers are water-cooled and maintenance-free and with the efficiency is more
than 30%.
Maxphotonics' MFSC 2000W-3000W (Chassis Type) Single Module CW Fiber
Laser are Class 4 laser products and are designed and tested with safety. By
following this User Guide and applying sound laser safety practices, it will be a
safe and reliable device.
Laser light exhibits unique characteristics that may pose safety hazards.
Therefore, the laser light can’t be normally associated with other light sources,
and all operators and people near the laser must be aware of these special
hazards.
In order to ensure the safe operation and optimal performance of the product,
please follow all warnings and safety instructions in this guide during process of
operation, maintenance and service.
For ensuring the safety of operators, operators are urged not to open the
equipment privately at all times. There are no user serviceable parts, equipment
or assemblies associated with this product. Lasers of unauthorized disassembly
shall not be subject to warranty.
6
Chapter 2
General Safety Information
1-Safety Conventions
All safety warning symbols during operating process of the laser include:
SYMBOLS DESCRIPTION
WARNING: Refers to a potential Electrical Hazard to
human body. It requires a procedure that, if not correctly
followed, may result in bodily harm to you and/or others.
Do not proceed beyond the WARNING sign until you
completely understand and meet the required conditions.
CAUTION：Refers to a potential hazard on product. It
requires a procedure that, if not correctly followed, may
result in damage to the product or components. In order
to ensure normal use of equipment, do not violate the
requirement of the CAUTION sign.
WARNING:Refers to a potential Laser Hazard.The symbol
represents laser radiation. The symbol is pasted on laser
output end.
NO SYMBOL
IMPORTANT：Refers to any information regarding the
operation of the product. Please do not overlook this
information.
7
Chapter 2 General Safety Information
2-Laser Protection
1、Laser Protection Requirements
You must wear the safety protective glasses while operating the laser, and
rationally select the safety protective glasses according to the lasing wavelength
of the laser. If the device is a tunable laser or Raman product, it emits light
over a range of wavelengths and the end user should conrm the laser safety
eyewear used protects against light emitted by the device over its entire range
of wavelength.
2、Laser Protective Equipment Suppliers
Maxphotonics recommends material or equipments provided by following laser
protective equipment suppliers for you, including LaserVision USA, Kentek
Corporation, Rochwell Laser Industries, etc. All the supplier information is
provided by Maxphotonics only for the convenience to use, so Maxphotonics
assumes no responsibility for any problem caused by using the products of
abovementioned suppliers.
NOTE :
◎Maxphotonics' MFSC 3000W (Chassis Type) Single Module CW Fiber Laser .
It may emit up to 3000W average power from 1060nm to 1100nm. This level
of light may cause damage to the eye and skin. Despite the radiation being
invisible, the beam may cause irreversible damage to the retina. Laser safety
eyewear is not provided with this instrument, but must be worn at all times while
the laser is operational.
8Chapter 2 General Safety Information
3-Reference Standard
Anti-interference Performance on Electromagnetic Compatibility：
EN 61000-6-4:2007 + A1:2011
EN 61000-6-2:2005 + AC: 2005
EN 61000-3-2:2014
EN 61000-3-3:2013
Power Supply Security:
EN 61010-1:2010
EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Laser Security:
EN 60825-1:2014
CDRH 21 CFR 1040.10
NOTE :
◎In accordance with relevant EU and national standards and requirements, the
laser must be classied according to its output power and laser wavelength. All
MFSC-2000W-4000W-Series laser products with high power belong to Class 4
products (according to article 8, EN 60825-1).
Inhaltsverzeichnis
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
