MAXPhotonics X1-MFSC-1500W Bedienungsanleitung
X1-MFSC-1500W Handheld Laser Welding Machine
Maxphotonics Co.,Ltd.
Copyright Notation
Copyright © Maxphotonics Co ., Ltd ( here after referred to as Maxphotonics). All
rights reserved. You may not copy, modify, transmit or publish this publication,
in any form, in any media or by any means, without the prior written permission
of Maxphotonics, except as allowed under applicable copyright laws. Permitted
copies shall bear the same copyright and proprietary notices that were contained
on the ori ginal version.
Maxphotonics believes that the information provided is accurate and reliable;
however Maxphotonics makes no warranty, representation,expression or
implication that this document can be used as reference in other occasions.
Furthermore, Maxphotonics does not assume responsibility for any infringement
of patents or other rights of third parties due to use of the information contained
in this document. Maxphotonics shall not be liable for errors contained in this
document or for direct or indirect damages of relevant equipment.
Maxphotonics and the Maxphotonics Logo are registered trademarks of
Maxphotonics Co., Ltd., and the Logo does not break any regulations of
Trademark law.Maxphotonics grants no rights for patent or other intellectual
property mentioned herein.
All information contained in this document is subject to change and revision
without notice.
Subject to change without notice.
Maxphotonics Co.,Ltd.
Address: Maxphotonics Industrial Park, 3rd Furong Road,
Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125
E-Mail: [email protected]
http://en.maxphotonics.com
3
Preface
Thank you for using the handheld laser welding products Maxphotonics. We
compile this document for you in order that the laser is used and maintained
properly. Due to the limited level of the writers, coupled with time constraints,
there are some careless mistakes in this document, your understanding and
suggestion to help us make an improvement will be much appreciated . Thank
you again for using Maxphotonics' products.
Please take time to read and understand this User's Guide and familiarize
yourself with the operating and maintenance instructions before you use the
product. We strongly recommend that the operator read the Section 2 titled
“Safety Information” prior to operating the product.
This User's Guide should stay with the product to provide you and all future
users and owners of the product with important operating, safety and other
information.
We identify the parts to which you need to pay special attention in the document
with underscore. Please notice those information to prevent the unnecessary
damages.
4
Company Profile
Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in
China. It is also the first in China to realize independent intellectual property
rights and vertical integration in the core technologies of ber lasers and optical
devices. One of the national high-tech enterprises. Maxphotonics has developed
into an internationally renowned laser manufacturer that develops, manufactures
and sells fiber lasers and core optical components. It is the second largest
domestic ber laser manufacturer in the domestic market.
Maxphotonics specializes in the research, development, production and sales of
ber lasers, including pulsed ber lasers, continuous ber lasers and direct diode
lasers. It also implements pump sources, combiners, fiber gratings, isolators,
laser output heads, and stripping. Optical devices such as molds, acousto-optic
modulators, and pattern matchers are produced autonomously. Products are
widely used in marking, engraving, cutting, drilling, cladding, welding, surface
treatment, rapid prototyping and additive manufacturing processes.
More informations，please visit our website：
http://en.maxphotonics.com
CONTENT
5
Company Profile ...........................................................................4
Chapter 1 Characteristic Description .........................................7
Chapter 2 General Safety Information .........................................8
1-Handheld Laser Welding Machine Is Safe To Use........................8
2-Safety Conventions ...................................................................10
3-Laser protection ........................................................................11
4-Weld Feature Safety..................................................................12
5-Reference Standard ..................................................................14
6-General Safety Instructions .......................................................15
7-More Safety Information ............................................................20
Chapter 3 Product Description ..................................................21
1-Features....................................................................................21
2-Module Configuration ................................................................22
3-Laser Model Designation Codes ................................................22
4-Certification ...............................................................................22
5-Front And Back Panel Description Of Laser Welding Machine .......22
6-Operation Panel Description......................................................25
7-Solder Head Instructions ...........................................................33
Chapter 4 Specification ..............................................................35
1-Optical Characteristic Parameters .............................................35
2-General Characteristic Parameters............................................36
CONTENT
6
3-Structural Layout .......................................................................37
Chapter 5 Disassembly Guide....................................................38
1-Disassembly Step......................................................................38
2-Packing List...............................................................................40
Chapter 6 Operation Guide ........................................................41
1-Notice........................................................................................41
2-Electrical Power Connection......................................................41
3-Securely Lock The Connection ..................................................42
4-Gas Connection.........................................................................42
5-Wire Feeder Connection............................................................43
6-Wire Feeder And Hand Welding Connection ..............................49
7-Startup Steps ............................................................................52
8-Welding Process Parameters.....................................................53
9-Product Accessory Inspection And Cleaning Guide ....................56
Chapter 7 Service and Maintenance ..........................................59
1-Maintenance Notes....................................................................59
2-Service Statements ...................................................................60
Chapter 8 Warranty Statements .................................................61
1-General Items............................................................................61
2-Warranty Limitations..................................................................61
7
Chapter 1
Characteristic Explain
MFSC series is a series of high-efficiency, high-reliability, maintenance-free
high-power lasers developed by Maxphotonics. It adopts phase-change heat
dissipation method, the wavelength range is 1060nm~1100 nm, and the laser
efciency is >25%.
Maxphotonics MFSC series lasers belong to Class 4 (Class 4) laser products,
and the product design and testing have fully considered safety.
Laser light exhibits unique characteristics that may pose safety hazards.
Therefore, the laser light can’t be normally associated with other light sources,
and all operators and people near the laser must be aware of these special
hazards.
In order to ensure the safe operation and optimal performance of the product,
please follow all warnings and safety instructions in this guide during process of
operation, maintenance and service.
For ensuring the safety of operators, operators are urged not to open the
equipment privately at all times. There are no user serviceable parts, equipment
or assemblies associated with this product. Lasers of unauthorized disassembly
shall not be subject to warranty.
8
Chapter 2
General Safety Information
1 -Handheld Laser Welding Machine Is Safe To Use
Handheld laser welding machines are classified as hazardous, invisible laser
radiation Class 4 laser products. This product emits infrared laser radiation with
a wavelength of 1080nm, and the average power radiated by the welding head is
greater than 100W, which can cause damage to eyes and skin directly or indirectly
exposed to such light intensity. This infrared radiation is invisible, and the laser
beam can cause irreversible damage to the retina or cornea. Be sure to wear
appropriate and certied 1080nm near-infrared laser safety glasses before operating
the handheld laser welding machine.
(1) For the safety of you and others, it is strictly forbidden to point the welding head
at yourself or others;
(2) Appropriate and certied 1080nm near-infrared band laser safety glasses and
anti-high temperature gloves must be worn before using the handheld laser welding
machine;
(3) For the safety of you and others, the alligator clip must be clamped to the welding
workpiece before triggering the laser, and it is strictly prohibited to clamp it in other
places except the workpiece to avoid safety hazards caused by abnormal light
output;
(4) The welding operation of the hand-held laser welding machine should be
carried out in an independent space with laser protection; non-welding personnel
and combustible and flammable materials should be kept away from the welding
9
Chapter 2 General Safety
Information
operation table for more than 10 meters, and a re extinguisher should be placed
near the welding area;
(5) Wear a mask when welding highly reective materials;
(6) Make sure that the hand-held laser welding machine is properly grounded,
otherwise it may cause the product shell to be electried, resulting in personal injury
to the operator; if the grounding is not operated as required, it may cause laser
alarm, no light, laser instability and other hidden faults;
(7) Please do not work in the environment of rain and direct sunlight, otherwise it
may cause high temperature and high humidity alarm or short circuit, affecting the
normal use of the laser, and even causing potential safety hazards. .
10
Chapter 2 General Safety Information
SYMBOLS DESCRIPTION
WARN:
Text marked with an electrical warning symbol indicates
a potential personal hazard. Failure to follow certain
procedures may cause certain or fatal hazards to you or
others.
NOTICE:
There is a potential hazard to the product; certain
procedures need to be followed, otherwise your equipment
or components may be damaged. Do not violate the
requirements of the attention signs during operation to
ensure the normal use of the equipment.
This logo represents laser radiation, and we have affixed
this logo to the laser output of the product.
This symbol means wearing protective eyewear, please
be sure to wear appropriate and certified 1080nm near-
infrared band laser protective eyewear.
NO SYMBOL
IMPORTANT:Refers to any information regarding the
operation of the product. Please do not overlook this
information.
2 -Safety Conventions
As shown in the table below, all safety warning signs during the operation of the
hand-held laser welding machine include:
Safety Glasses
Must Be Worn
Inhaltsverzeichnis
Andere MAXPhotonics Schweißsystem Handbücher
Beliebte Schweißsystem Handbücher anderer Marken
TAFA
TAFA 30*8B35 Bedienungsanleitung
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung
ESAB
ESAB Buddy Arc 145 Bedienungsanleitung
CIGWELD
CIGWELD 636804 Kurzanleitung
Red-D-Arc
Red-D-Arc DC-400 Bedienungsanleitung
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung
