2 3GB GB
level over the total working period.
Idenfy addional safety measures to protect the operator from the effects of vibraon such as: maintain
the tool and the accessories, keep the hands warm, organisaon of work paerns.
APPLICATION
are devoted to connuously improving and perfecng the exisng products. Therefore,
the technical performance and design concept of products may vary without any prior noce; our apology
for any possible incurrence of inconvenience therefrom. Read and follow the operang instrucons and
safety informaon before using for the first me. Save this manual.
WARNING
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Read all
safety warnings and all instrucons. Failure to follow the warnings and instrucons may result in electric
shock, fire and/or serious injury. Make sure the voltage corresponds to the type label on the unit. Packing
materials are no toys! Children must not play with plasc bags! Danger of suffocaon! The power tool noise
output may exceed 85dB(A) at the workplace. In this instance, wear ear protecon.
GENERAL SAFETY
Read all safety warnings and all instrucons. Failure to follow the warnings and instrucons may result in
electric shock, fire and/or serious injury.
Save all warnings and instrucons for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or baery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operang a power tool. Distracons can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet.Never modify the plug in any way.Do not use any adapter
plugs with earthed (grounded) power tools.Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact withearthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools torain or wet condions. Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operang a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If operang a power tool in a damp locaon is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operang a power tool. Do not use
a power tool while you are red or under the influence of drugs, alcohol or medicaon.A moment of
inaenon while operang power tools may result in serious personal injury.
b) Use personal protecve equipment. Always wear eye protecon. Protecve equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protecon used for appropriate condions will reduce
personal injuries.
c) Prevent unintenonal starng. Ensure the switch is in the off-posion before connecng topower
source and/or baery pack, picking up or carrying the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusng key or wrench before turning the power tool on. A wrench or a key leaached
to a rotang part of the power tool may result in personal injury.
e) Do not overreach.Keep proper foong and balance at all mes.This enables beer control of the
power tool in unexpected situaons.
f) Dress properly.Do not wear loose clothing or jewellery.Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connecon of dust extracon and collecon facilies, ensure these are
connected and properly used. Use of dust collecon can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your applicaon. The correct power tool
will do the job beer and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the baery packfrom the power tool before
making any adjustments, changing accessories, or storing power tools. Such prevenve safety measures
reduce the risk of starng the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instrucons tooperate the power tool. Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condion that may affect the power tool’s operaon. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cung tools sharp and clean. Properly maintained cung tools with sharp cung edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instrucons, taking into
account the working condions and the work to be performed.
Use of the power tool for operaons different from those intended could result in a hazardous situaon.
5) Service
a) Have your power tool serviced by a qualified repair person using only idencal replacement parts. This
will ensure that the safety of the power tool is maintained.
b) Cauon! The use of any accessories or addional tools other than those recommended in this manual
may lead to an increased risk of injury. Only use original replacement parts.
SAFETY INSTRUCTION
•You may only spray coang materials such as paints, varnishes, glazes, etc. with a flashpoint of 55°C (32°C
in UK) and higher without addional warning. (German classificaon of coang material is hazard classes A
II and A III, see material n.)
• The device may not be used in workplaces covered by the explosion-protecon regulaons.
•There must be no sources of ignion such as, for example, open fres, smoke of lit cigarees, cigars and
tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the vicinity during spraying.
• Do not spray any substances whose hazard potenal is not known.
• Before working on the spray gun remove the power plug from the socket.
• Do not use the spray guns to spray flammable substances.
• The spray guns are not to be cleaned with flammable solvents which have a flashpoint under 55°C.
•Cauon against dangers that can arise from the sprayed substance and observe the text and informaon
on the containers or the specificaons given by the substance manufacturer.
The paint sprayer is mainly intended for decoraon coang, painng, plant watering, etc., it is can not
be intended for the painng and coang of flammable, explosive and corrosive liquids, please read the
instrucon manual carefully before use.
