Maytag W10873035A Bedienungsanleitung

W10873035A

W10873049A - SP

ELECTRIC or GAS DRYER

USE AND CARE GUIDE

Table of Contents Table des matières

DRYER SAFETY ............................................................2

CHECK YOUR VENT SYSTEM

FOR GOOD AIR FLOW .................................................4

USE SENSOR DRY CYCLES FOR BETTER

FABRIC CARE AND ENERGY SAVINGS......................4

CONTROL PANEL & FEATURES..................................5

CYCLE GUIDE...............................................................6

USING YOUR DRYER ...................................................7

DRYER CARE................................................................9

TROUBLESHOOTING.................................................11

WARRANTY.................................................................13

ASSISTANCE OR SERVICE....................BACK COVER

SÉCURITÉ DE LA SÉCHEUSE ...................................14

VÉRIFICATION D’UNE CIRCULATION

D’AIR ADÉQUATE POUR LE SYSTÈME

D’ÉVACUATION ..........................................................16

UTILISATION DES PROGRAMMES DE SÉCHAGE

PAR DÉTECTION POUR UN MEILLEUR SOIN

DU TISSU ET DAVANTAGE D’ÉCONOMIES

D’ÉNERGIE..................................................................16

TABLEAU DE COMMANDE

ET CARACTÉRISTIQUES ...........................................17

GUIDE DE PROGRAMMES ........................................18

UTILISATION DE LA SÉCHEUSE...............................19

ENTRETIEN DE LA SÉCHEUSE.................................21

DÉPANNAGE. ..............................................................24

GARANTIE...................................................................26

ASSISTANCE

OU SERVICE. ........................COUVERTURE ARRIÈRE

SÉCHEUSE

ÉLECTRIQUE ou À GAZ

GUIDE D’UTILISATION

ET D’ENTRETIEN

Para una versión de estas instrucciones en español, visite www.maytag.com

DRYER SAFETY

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Good air ow

Along with heat, dryers require good air ow to

efciently dry laundry. Proper venting will reduce your

drying times and improve your energy savings. See

“Installation Instructions.”

The venting system attached to the dryer plays a big role in

good air ow.

Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless

of who installed the dryer.

Maintain good air ow by:

Good Better

USE SENSOR DRY CYCLES FOR BETTER FABRIC CARE

AND ENERGY SAVINGS

Use the SENSOR DRY cycles to provide the most energy savings and enhanced fabric care from the dryer. During SENSOR DRY

cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the

dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.

With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.

Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

n Cleaning your lint screen before each load.

n Replace plastic or foil vent material with 4" (102 mm)

diameter heavy, rigid vent material.

n Use the shortest length of vent possible.

n Use no more than four 90° elbows in a vent system;

each bend and curve reduces air ow.

n Remove lint and debris from the exhaust hood.

n Remove lint from the entire length of the vent system at

least every 2 years. When cleaning is complete, be sure

to follow the “Installation Instructions” supplied with your

dryer for nal product check.

n Clear away items from the front of the dryer.

CONTROL PANEL & FEATURES

TEMPERATURE

Select a drying temperature based on the fabrics in your

load. If you are unsure of the temperature to select for a

load, select the lower setting rather than the higher setting.

SIGNAL

The Signal produces an audible sound when the drying cycle

is nished. Promptly removing clothes at the end of the cycle

reduces wrinkling.

Turn the SIGNAL knob to select the desired setting (Off,

Low, or High).

CYCLE KNOB

Use Cycle Knob to select available cycles on your dryer.

Turn the knob to select a cycle for your laundry load. See

“Cycle Guide” for detailed descriptions of cycles.

TIMED DRY

Will run the dryer for the specied time on the control.

On models with a selectable temperature knob, you

may choose a setting based on the fabrics in your load.

On some models, temperature is included in the cycle

selections. Drying time and temperature will depend on

your dryer model.

SENSOR DRY

Senses moisture in the load or air temperature and

shuts off when the load reaches the selected dryness

level. Gives the best drying in the shortest time. Drying

time will vary based on fabric type, load size, and

temperature setting.

WRINKLE CONTROL Feature

The WRINKLE CONTROL feature will run after your drying

cycle is complete. It periodically starts and stops the dryer,

tumbling the load without heat to help avoid wrinkling.

WRINKLE CONTROL automatically starts at the end of the

cycle. Opening the door will stop this feature.

n Get up to 120 minutes of heat-free, periodic tumbling at

the end of a cycle. Turn the WRINKLE CONTROL knob

to OFF, 60 min., or 120 min. at any time before the cycle

has ended.

NOTE: A signal will sound periodically when the WRINKLE

CONTROL setting is selected, but only if the Signal is also

selected.

PUSH TO START

Press the PUSH TO START knob to start the dryer.

Not all features and options are available on all models.

Appearance may vary.

52 3 41

SENSOR DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.

Choose ENERGY PREFERRED cycle for optimal energy savings.

Not all cycles and settings are available on all models.

Items to dry: Temperature: Available

Options: Cycle Details:

Signal

Wrinkle Control

CYCLE GUIDE — SENSOR DRY CYCLES

CYCLE GUIDE — TIMED DRY CYCLES

TIMED DRY - Will run the dryer for the specied time on the control.

Not all cycles and settings are available on all models.

NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you

like, select Less Dry next time you dry a similar load.

Casual, shirts, pants,

lightweight items,

synthetics, delicates,

athletic wear

Signal

Wrinkle Control

Jeans, heavy work

clothes, towels

More Dry

Energy Preferred

Less Dry

More Dry

Energy Preferred

Less Dry

More Dry

Energy Preferred

Less Dry

Signal

Wrinkle Control

Automatic cycles give the best drying

in the shortest time. Drying time varies

based on fabric type, load size, and

dryness setting.

Select a drying temperature based on

the fabrics in your load. If you are unsure

of the temperature to select for a load,

select the lower setting rather than the

higher setting.

Dryness Level:

High

Medium or

Low

Work clothes, medium

weight fabrics, sheets

Items to dry: Temperature:Cycle: Available

Options: Cycle Details:

Setting the Drying Temperature

If your dryer has multiple heat settings:

A High temperature setting may be used for drying

heavyweight items such as towels and work clothes.

A Low to Medium temperature setting may be used for drying

medium-weight items such as sheets, blouses, dresses,

underwear, permanent press fabrics, and some knits.

Use the Air Fluff (no heat) setting for foam, rubber, plastic, or

heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for

various loads, refer to the care label directions.

Rubber, plastic, heat

sensitive fabrics Timed Dry Air Fluff Signal No heat drying.

Any load Freshen Up Any Signal Use low to medium temperature to

smooth out wrinkles, such as those

found in clothes packed in a suitcase or

in items wrinkled from being left in the

dryer too long.

Towels, bedding,

children’s clothing Sanitize Sanitize Signal Extended high-heat drying cycle

intended to help sanitize items such as

bedding, towels, and baby wear. This

cycle is not recommended for all fabrics.

For best results, run cycle to completion,

do not interrupt.

USING YOUR DRYER

1. Clean the lint screen

Clean the lint screen before each load. Pull the lint screen out

of its holder. Roll lint off the screen with your ngers. Do not

rinse or wash screen to remove lint. Push the lint screen rmly

back into place.

For additional cleaning information, see “Dryer Care”.

2. Load the dryer

Place laundry in the dryer. Close the door.

Do not tightly pack the dryer; clothes should be able to

tumble freely.

NOTE: Your model may have a different door than the one

shown. Some models have drop down doors.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this dryer.

Before using your dryer, wipe the dryer drum with a damp cloth

to remove dust from storing and shipping.

3. Select the desired cycle

Select the desired cycle for your load. See the Cycle Guide

for more information about each cycle.

SENSOR DRY Cycles

You can select a different dryness level, depending on your

load, by turning the knob to dryness level.

Selecting More Dry, Energy Preferred, or Less Dry

automatically adjusts the dryness level of the fabrics at which

the dryer will shut off.

SENSOR DRY cycles give the best drying in the shortest time.

Drying time varies based on fabric type, load size, and dryness

setting. Choose Energy Preferred for optimal energy savings.

Less Dry removes less moisture and is used for loads you may

want to put on a hanger to complete drying.

More Dry removes more load moisture. Energy Preferred is

used for a starting point for SENSOR DRY cycles.

7. Press PUSH TO START to begin

cycle

Push and hold the PUSH TO START knob to begin the cycle.

4. Set temperature

Select temperature by turning the knob to the desired position

or select the Sensor Dry cycle that has the temperature

included in the cycle selections. Turn the TEMPERATURE knob

to change the drying temperature setting. See “Setting the

Drying Temperature”.

NOTE: Not all options and settings are available with all cycles.

5. Select Signal (if desired)

Turn the SIGNAL knob to select the desired setting (Off, Low,

or High). The Signal produces an audible sound when the

drying cycle is nished. Promptly removing clothes at the end

of the cycle reduces wrinkling.

DRYING RACK

To purchase a drying rack for your dryer, please refer to

“Assistance or Service” on the back cover of the manual or

contact the dealer from whom you purchased your dryer.

Part Number Accessory

3406839 Drying rack - ts 29" Super Capacity Plus

6. Select Wrinkle Control (if desired)

Select Wrinkle Control by turning the knob to the

desired position.

Get up to 120 minutes of heat-free, periodic tumbling at the

end of a cycle. Turn the WRINKLE CONTROL knob to OFF,

60 min., or 120 min. at any time before the cycle has ended.

NOTE: Not all options and settings are available with

all cycles.

DRYER CARE

Keep dryer area clear and free from items that would

block the air ow for proper dryer operation. This includes

clearing piles of laundry in front of the dryer.

Cleaning the lint screen

Every load cleaning

The lint screen is located in the dryer. A screen blocked by

lint can increase drying time.

To clean:

1. Pull the lint screen out of its holder. Roll lint off the

screen with your ngers. Do not rinse or wash screen to

remove lint. Wet lint is hard to remove.

2. Push the lint screen rmly back into place.

IMPORTANT:

n Do not run the dryer with the lint screen loose,

damaged, blocked, or missing. Doing so can cause

overheating and damage to both the dryer and fabrics.

n If lint falls off the screen into the dryer during removal,

check the exhaust hood and remove the lint. See

“Venting Requirements.”

As needed cleaning

Laundry detergent and fabric softener residue can build

up on the lint screen. This buildup can cause longer drying

times for your clothes, or cause the dryer to stop before

your load is completely dry. The screen is probably clogged

if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6

months, or more frequently, if it becomes clogged due

to a residue buildup.

To wash:

1. Roll lint off the screen with your ngers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid

detergent. Scrub lint screen with the brush to

remove residue buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel. Reinstall

screen in dryer.

Cleaning the dryer interior

To clean dryer drum

1. Apply a liquid, nonammable household cleaner to the

stained area of the drum and rub with a soft cloth until

stain is removed.

2. Wipe drum thoroughly with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments that contain loose dyes, such as denim

blue jeans or brightly colored cotton items, may discolor the

dryer interior. These stains are not harmful to your dryer and

will not stain future loads of clothes. Dry these items inside

out to avoid drum staining.

Removing accumulated lint

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often,

depending on dryer usage. Cleaning should be done by a

qualied servicer.

From the Exhaust Vent

Lint should be removed every 2 years, or more often,

depending on dryer usage.

Cleaning the dryer location

Vacation, storage, and moving care

Non-Use or Storage Care

Operate your dryer only when you are at home. If you will

be on vacation or not using your dryer for an extended

period of time, you should:

1. Unplug dryer or disconnect power.

2. (For gas dryers only): Close shut-off valve to gas supply

line.

3. Clean lint screen. See “Cleaning the Lint Screen.”

Moving Care

For power supply cord-connected dryers:

1. Unplug the power supply cord.

2. Make sure leveling legs are secure in dryer base.

3. Use tape to secure dryer door.

For direct-wired dryers:

1. Turn off power at fuse or breaker box.

2. Disconnect wiring.

3. Make sure leveling legs are secure in dryer base.

4. Use tape to secure dryer door.

For gas dryers:

1. Unplug or disconnect power to dryer.

2. Close shut-off valve in gas supply line.

3. Disconnect gas supply line pipe and remove ttings

attached to dryer pipe.

4. Cap the open fuel supply line.

5. Make sure leveling legs are secure in dryer base.

6. Use tape to secure dryer door.

Reinstalling the Dryer

Follow the “Installation Instructions” to locate, level, and

connect the dryer.

Changing the drum light

(on some models)

1. Unplug dryer or disconnect power.

2. Open the dryer door. Locate the light bulb cover on the

back wall of the dryer. Using a Phillips-head screwdriver,

remove the screw located in the lower right-hand corner

of the cover. Remove the cover.

3. Turn bulb counterclockwise. Replace the bulb with

a 10-watt appliance bulb only. Replace the cover and

secure with the screw.

4. Plug into a grounded outlet or reconnect power.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Maytag Trockner Handbücher

Maytag

Maytag MGDX655DW2 Bedienungsanleitung

Maytag

Maytag PY-1 Bedienungsanleitung

Maytag

Maytag MEDE201Y Bedienungsanleitung

Maytag

Maytag MEDB750YW0 Bedienungsanleitung

Maytag

Maytag MGDE900VJ0 Bedienungsanleitung

Maytag

Maytag MGD6000X Bedienungsanleitung

Maytag

Maytag Neptune MD3000 Bedienungsanleitung

Maytag

Maytag MED5707TQ1 Bedienungsanleitung

Maytag

Maytag MEDC300BW Bedienungsanleitung

Maytag

Maytag MGDE300VF - Performance Series 27-in Gas... Bedienungsanleitung

Maytag

Maytag MGDC700VJ - Centennial 7.4 cu. Ft. Gas Dryer Bedienungsanleitung

Maytag

Maytag MEDX700X Stücklistenhandbuch

Maytag

Maytag ELECTRIC DYER Bedienungsanleitung

Maytag

Maytag MDE17MN Bedienungsanleitung

Maytag

Maytag MED9700SB0 Bedienungsanleitung

Maytag

Maytag SDE5401AYW Bedienungsanleitung

Maytag

Maytag CD-3 Bedienungsanleitung

Maytag

Maytag W10494218A Bedienungsanleitung

Maytag

Maytag 4KMEDC410JW Bedienungsanleitung

Maytag

Maytag MD9806 Bedienungsanleitung

Maytag

Maytag MED5100DC Bedienungsanleitung

Maytag

Maytag MED5900TW0 Bedienungsanleitung

Maytag

Maytag SD-7 Bedienungsanleitung

Maytag

Maytag MLG35PD Bedienungsanleitung

Beliebte Trockner Handbücher anderer Marken

Bosch

Bosch WTA79200GB Bedienungsanleitung

Amana

Amana W10233410A Bedienungsanleitung

Miele

Miele TWH 780 WP Bedienungsanleitung

Asko

Asko T760 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Bedienungsanleitung

Bosch

Bosch Logixx 10 WTB76556GB Technisches Datenblatt

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Bedienungsanleitung

Electrolux

Electrolux EW2H328R2 Bedienungsanleitung

Beko

Beko DS8433RX1M Bedienungsanleitung

Dawlance

Dawlance Spinner DS 6000 C Bedienungsanleitung

Electrolux

Electrolux TP5080TW Bedienungsanleitung

AEG

AEG TR838P4OB Bedienungsanleitung

Indesit

Indesit IDV 75 Bedienungsanleitung

Infiniton

Infiniton SD-DG85C Bedienungsanleitung

BOMANN

BOMANN WT 5019 Bedienungsanleitung

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Bedienungsanleitung

Asko

Asko T793C Bedienungsanleitung

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Bedienungsanleitung