Maytag 12001908 Bedienungsanleitung

(2)- (MAYTAG) TOP LOAD WASHER LID SWITCH KIT

#12001908.

A4141YlrAG

Instruction

Sheet 16010951

6 2612390-1201

This instruction sheet is to be used with:

REPAIR PART NO.: 12001908 (MPN 6 2306250)

DESCRIPTION: LID SWITCH KIT

CONTENTS: ]

TOOLS REQUIRED:

Phillips Screwdriver

The purpose of this instruction is to inform you of changes made to the switch, making the

switch no longer adjustable. The lid switch mechanism is designed to shut off the machine if

the lid is lifted no more than 1-7/8" and will allow the machine to start when the lid is less than

1/4" high. The plunger is only used with Atlantis washers.

Note: The new lid switch (identified with a grey button) is now non-adjustable. You

cannot adjust by pulling on the lid switch button.

Procedures

1. Disconnect power.

2. Remove console to gain access to lidswitch.

3. Liftlid slightlyto remove pressure onthe lid switch.

4. Remove lidswitch and installnew.

5. Reverse the afore mentioned steps.

6. Verify proper lid opening per measurements in the first paragraph.

7. If machine continues to not operate properly, please follow information shown on the follow-

mg page. ..... over

240 Edwards Street. Cleveland. TN 37311

DependableCareIPerforma L Washers: the enclosed lid switch is interchangable with the

lid switch used on those machines. Checking lid switch performance:

1. Ifthe switch functions, then you may need to adjust Ibend the unbalance lever slightly

backward.

2. Verify proper lid opening again.

If the switch shuts off the machine after the lid is o0ened more than 1-718", bend the

unbalance lever toward the back.

If the switch shuts off the machine when the lid is lower than 1/4". bend the unbalance

lever toward the front.

AUantis washers: In addition to the new lid switch, a change was also made to the length of

the plunger.

I. Verify proper lid opening again.

If the switch shuts off the machine after the lid is opened more than 1-7/8", check the

items listed below.

If the switch shuts offthe machil_e when the lid is lower than 1/4", use the enclosed

plunger and check the items listed below.

Other items that could be interpreted as a problem related to the lid switch, are as

follows:

Lid "oil canning" or chipped porcelain where the lid interfaces with the switch (or cam for

Atlantis). The lid may need to be replaced.

Lid hinpes or hinge balls either not inserted into the lid properly or cracked.

(Atlantis only) Hinge bushings mounted into the top may be cracked orworn.

(Atlantis only) Check the cam on the back flange of the lid to make sure itis not worn or

broken.

Inhaltsverzeichnis

Andere Maytag Wäschezubehör Handbücher

Maytag

Maytag 201805 Bedienungsanleitung

Maytag

Maytag XHPC155XW Bedienungsanleitung

Maytag

Maytag XHP1550VA0 Bedienungsanleitung

Maytag

Maytag DC68-01052A Bedienungsanleitung

Maytag

Maytag XHP1000XW Bedienungsanleitung

Maytag

Maytag WHP0400VW Bedienungsanleitung

Maytag

Maytag 12001454 Bedienungsanleitung

Maytag

Maytag 12001736 Bedienungsanleitung

Beliebte Wäschezubehör Handbücher anderer Marken

Hideaway

Hideaway Soft Close Series Bedienungsanleitung

Miele professional

Miele professional XCI-Box-LG Bedienungsanleitung

Kenmore

Kenmore HE3 Bedienungsanleitung

Frigidaire

Frigidaire 137147600 B (0906) Bedienungsanleitung

Electrolux

Electrolux E4YH200 Bedienungsanleitung

GE SBSD137 Bedienungsanleitung

GE 49-90233 Bedienungsanleitung

Smeg

Smeg KITWDHE - RAISER KIT Bedienungsanleitung

American Dryer Corp.

American Dryer Corp. EURO-12 Bedienungsanleitung

Xavax

Xavax 111377 Bedienungsanleitung

Kenmore

Kenmore C47012 Bedienungsanleitung

Singer

Singer MSP7 Bedienungsanleitung

NSS

NSS Aero Plus Bedienungsanleitung

GE SBSD137 Bedienungsanleitung

Truvox International

Truvox International Air Mover AM Bedienungsanleitung

ALDI

ALDI Workzone Titanium+ LB-TFM01 Bedienungsanleitung

MELICONI

MELICONI BASE SPACE BASKET Bedienungsanleitung

American Dryer Corp.

American Dryer Corp. ML-758 Bedienungsanleitung