Maytag MSB2654HE Bedienungsanleitung

Side by Side

Use & Care Guide

R

Form No. C/11/04 Part No. 12842107 www.maytag.com Litho U.S.A.

Table of Contents

Important Safety Instructions..... 1-2

Installation ...................................... 3-9

Temperature Controls............... 10-12

Fresh Food Features ................. 13-15

Freezer Features .............................. 16

Ice and Water ............................. 17-19

Water Filter................................. 20-22

Food Storage Tips..................... 23-25

Care and Cleaning.................... 26-29

Operating Sounds ........................... 30

Troubleshooting......................... 31-34

Warranty & Service ......................... 35

Guide d’utilisation et d’entretien . 36

Guía de uso y cuidado ................... 74

Important Safety Instructions

WARNING – Hazards or unsafe practices which

COULD result in severe personal injury or death.

WARNING

DANGER – Immediate hazards which WILL result

in severe personal injury or death.

DANGER

CAUTION – Hazards or unsafe practices which COULD

result in minor personal injury or property damage.

CAUTION

What You Need to Know About

Safety Instructions

Warning and Important Safety Instructions appearing in

this guide are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining or operating appliance.

Always contact the manufacturer about problems or

conditions you do not understand.

Recognize Safety Symbols, Words,

Labels

Installer: Please leave this guide with this appliance.

Consumer: Please read and keep this Use & Care

Guide for future reference. This guide provides

proper use and maintenance information.

Keep sales receipt and/or cancelled check as proof

of purchase.

Call: 1-800-688-9900 U.S.A.

1-800-688-2002 Canada

Have complete model and serial number

identification of your refrigerator. This is located on a

data plate inside the refrigerator compartment, on

the upper left side. Record these numbers below for

easy access.

Model Number _______________________________

Revision Number ______________________________

Serial Number ________________________________

Date of Purchase______________________________

In our continuing effort to improve the quality and

performance of our appliances, it may be necessary

to make changes to the appliance without revising

this guide.

This appliance is equipped with a three-prong

grounding plug for your protection against possible

electrical shock hazards. It must be plugged into a

grounding receptacle. Where a standard two-prong

wall receptacle is encountered, it is the personal

responsibility and obligation of the customer to have it

replaced with a properly grounded three-prong wall

receptacle. Do not under any circumstances, cut or

remove the third (ground) prong from the power cord.

Do not use an adapter plug.

Power supply cord with

three-prong grounding plug

Grounding type

wall receptacle

To reduce risk of injury or death, follow basic

precautions, including the following:

IMPORTANT: Child entrapment and suffocation

are not problems of the past. Junked or abandoned

refrigerators are still dangerous – even if they sit out

for “just a few days.” If you are getting rid of your old

refrigerator, please follow the instructions below to

help prevent accidents.

Before you throw away your old

refrigerator or freezer:

•Take off the doors.

•Leave the shelves in place so

children may not easily climb

inside.

DANGER

Important Safety Instructions

To reduce risk of fire, electric shock, serious injury or

death when using your refrigerator, follow these basic

precautions, including the following:

1. Read all instructions before using the refrigerator.

2. Observe all local codes and ordinances.

3. Be sure to follow grounding instructions.

4. Check with a qualified electrician if you are not

sure this appliance is properly grounded.

5. Do not ground to a gas line.

6. Do not ground to a cold-water pipe.

7. Refrigerator is designed to operate on a separate

115 volt, 15 amp., 60 cycle line.

8. Do not modify plug on power cord. If plug does

not fit electrical outlet, have proper outlet installed

by a qualified electrician.

9. Do not use a two-prong adapter, extension cord

or power strip.

10. Do not remove warning tag from power cord.

11. Do not tamper with refrigerator controls.

12. Do not service or replace any part of refrigerator

unless specifically recommended in Use & Care

Guide or published user-repair instructions. Do

not attempt service if instructions are not under-

stood or if they are beyond personal skill level.

13. Always disconnect refrigerator from electrical

supply before attempting any service. Disconnect

power cord by grasping the plug, not the cord.

14. Install refrigerator according to Installation

Instructions. All connections for water, electrical

power and grounding must comply with local

codes and be made by licensed personnel when

required.

15. Keep your refrigerator in good condition. Bumping

or dropping refrigerator can damage refrigerator

or cause refrigerator to malfunction or leak. If

damage occurs, have refrigerator checked by

qualified service technician.

16. Replace worn power cords and/or loose plugs.

17. Always read and follow manufacturer’s storage

and ideal environment instructions for items being

stored in refrigerator.

18. Your refrigerator should not be operated in the

presence of explosive fumes.

19. Children should not climb, hang or stand on any

part of the refrigerator.

20. Clean up spills or water leakage associated with

water installation.

WARNING

SAVE THESE INSTRUCTIONS

Installation

To avoid severe personal injury or death, observe the

following:

•Disconnect power to refrigerator before removing

doors. Connect power only after replacing doors.

•Green ground wire must be attached to top hinge

while performing door removal and replacement.

•Tape decorative panels (select models) securely

into place before removing door handles.

WARNING

To avoid property damage, observe the following:

•Protect vinyl or other flooring with cardboard, rugs

or other protective material, prior to moving

refrigerator.

•Do not adjust refrigerator to be any shorter than

681⁄2" tall (minus hinge and cap). Doing so may

damage underside components.

CAUTION

Location

•Do not install refrigerator near oven, radiator or other

heat source. If not possible, shield refrigerator with

cabinet material.

•Do not install where temperature falls below 55° F

(13° C) or rises above 110° F (43° C). Malfunction

may occur at this temperature.

•Refrigerator is designed for indoor household

application only.

Measuring the Opening

When installing your refrigerator, allow 1⁄2" space at top

and 1⁄2" space behind machine compartment cover

(located in the rear) for proper air circulation. If the

refrigerator is placed with the door hinge side against

a wall, you may want to allow additional space so the

door can be opened wider.

Subflooring or floor coverings (i.e. carpet, tile, wood

floors, rugs) may make your opening smaller than

anticipated.

Some clearance may be gained by using the leveling

procedure under Leveling.

IMPORTANT: If refrigerator is to be installed into a

recess where the top of the refrigerator is completely

covered, use dimensions from floor to top of hinge cap

to verify proper clearance.

Transporting Your Refrigerator

•NEVER transport refrigerator on its side. If an

upright position is not possible, lay refrigerator on its

back. Allow refrigerator to sit upright for

approximately 30 minutes before plugging it in to

assure oil returns to the compressor. Plugging

refrigerator in immediately may cause damage to

internal parts.

•Use an appliance dolly when moving refrigerator.

ALWAYS truck refrigerator from its side or

back–NEVER from its front.

•Protect outside finish of refrigerator during transport

by wrapping cabinet in blankets or inserting padding

between the refrigerator and dolly.

•Secure refrigerator to dolly firmly with straps or

bungee cords. Thread straps through handles when

possible. Do not overtighten. Overtightening

restraints may dent or damage outside finish.

Door and Hinge Removal

Some installations require door removal to get

refrigerator to final location.

1. Unplug power cord from power source.

2. Remove toe grille and bottom bracket covers (see

page 9).

•Open both doors 180°, or as wide as possible.

For ice and water dispensing models only:

Remove the left side bracket cover by carefully

pulling the water line to pry the cover loose. Then

continue to maintain downward pressure to the

notched side of the cover while swinging it off

(see page 9).

6. For ice and water dispensing models only:

Detach main wire connector harness and red wire

harness.

•To detach main wire

harness, use a flat blade

tool or fingernail to press

junction point between two

connectors to release.

•To detach red wire harness,

press tab on underside of

connector to release.

7. Remove top hinges along with doors.

Installation

•If tube end is damaged, cut off 5⁄8" before

reconnecting.

•If leaking occurs, reconnect the line.

8. Remove bottom hinges with a 3⁄8" hex head driver.

Replacing the Doors

•To replace the doors, follow the steps in Door and

Hinge Removal in reverse order.

IMPORTANT: If water line tube end is damaged, cut

off 5⁄8" before reconnecting.

To Disconnect the Water Line:

•Push in white collar (A) and hold.

•Pull the door-side tube from the connector (B).

To Reconnect the Water Line:

•Firmly push tube 5⁄8" into the connector. Use

lines on the tube as a guide for full insertion.

Note

•For refrigerators in operation, shut off water before

removing water line from the door.

3. Close doors.

4. Remove top hinge covers by

removing Phillips screws.

5. Unscrew 5⁄16" hex head screws from

top hinges.

For water dispensing

models only:

•Do not remove screw

connecting green ground

wire.

Installation

Materials Needed

•1⁄4" outer diameter flexible copper tubing

•Shut-off valve (requires a 1⁄4" hole to be drilled into

water supply line before valve attachment)

•Adjustable wrench

•1⁄4" hex nut driver

Note

•Add 8' to tubing length needed to reach water

supply for creation of service loop.

1. Create service loop with copper

tubing (minimum 2' diameter).

Avoid kinks in the copper tubing

when bending the service loop.

2. Remove plastic cap from water valve

inlet port.

3. Place brass nut (A) and

sleeve (B) on copper

tube end as illustrated.

(Do not use old sleeve.)

4. Place end of copper tubing into water

valve inlet port. Shape tubing slightly. Do

not kink – so that tubing feeds straight

into inlet port.

5. Slide brass nut over sleeve and screw nut

into inlet port. Tighten nut with wrench.

IMPORTANT: Do not overtighten. Cross

threading may occur.

6. Pull on tubing to confirm connection is

secure. Connect tubing to frame with

water tubing clamp (C) and turn on

water supply. Check for leaks and

correct if necessary. Continue to

observe the water supply connection

for two to three hours prior to moving

the refrigerator to its permanent

location.

7. Monitor water connection for 24 hours.

Correct leaks, if necessary.

2' diameter

minimum

Connecting the Water Supply

(select models)

To reduce the risk of injury or death, follow

basic precautions, including the following:

•Read all instructions before installing ice maker.

•Do not attempt installation if instructions are not

understood or if they are beyond personal skill

level.

•Observe all local codes and ordinances.

•Do not service ice maker unless specifically

recommended in Use & Care Guide or published

user-repair instructions.

•Disconnect power to refrigerator before installing

ice maker.

•Water damage due to an improper water

connection may cause mold/mildew growth. Clean

up spills or leakage immediately!

WARNING

To avoid property damage or possible injury,

follow basic precautions, including the

following:

•Consult a plumber to connect 1⁄4" O.D. copper

tubing to household plumbing to assure

compliance with local codes and ordinances.

•Confirm water pressure to water valve is between

35 and 100 pounds per square inch, 20 pounds

per square inch without filter.

•Do not use a self-piercing, or 3⁄16" saddle valve.

Both reduce water flow can become clogged over

time, and may cause leaks if repair is attempted.

•Tighten nuts by hand to prevent cross threading.

Finish tightening nuts with pliers and wrenches.

Do not overtighten.

•Wait two to three hours before placing refrigerator

into final position to check and correct any water

leaks. Recheck for leaks after 24 hours.

•Verify the copper tubing under the sleeve is

smooth and free from defects. Do not reuse an old

sleeve.

CAUTION

Installation

6. Align bottom of handle with lower door

tab. Press upper handle end to door

surface and firmly grasp lower end of

handle. Gently slide handle upward until

bottom of handle settles on door surface,

then reverse direction, sliding down-

ward to almost engaging tab with clip.

7. Grasp the handle firmly and slide down

until it clicks. The audible click indicates

fastening clips are securely interlocked.

2. Grasp the lower part of the handle firmly

and lift to remove.

To Remove:

1. Flex the handle away from the door panel.

Simultaneously place door handle removal

card underneath the base of the lower

handle. Insert the card to the line or until

it stops.

Handle Installation

If not installed, the handle is located in the interior of the

fresh food section or attached to the back of your refrig-

erator. Remove and discard handle packaging and tape.

Handle design varies from refrigerator to refrigerator.

Please reference the appropriate instructions for your

model.

Front Mount Handle with Extensions

Materials Needed

•Gloves to protect hands

•Phillips screwdriver

•Plastic door handle removal card (or 1⁄32" thick plastic

card), retain the card

Attach Extensions to Handle:

1. Align handle and

extension as shown.

2. Place extension in

handle opening.

3. Apply slight pressure

to both sides of the extension piece.

4. Slide extension until it stops on inside edge of

handle.

To Install:

1. The handles are to be oriented

as shown.

2. Align front mount door handle

clip with the door tabs.

3. Ensure the handle clips are

positioned slightly above the

door tabs.

5. Push the handle down against the upper

door tab just enough to allow it to hang

unsupported.

4. Rotate the handle so that the

handle is flat against the door.

Handle

Clip

Door

Tab

Installation

Full-Length Aluminum Handles

To Install:

1. Release top door trim by removing

Phillips screws from top of fresh food

door and retain screws for later use.

2. Align notches on back of handle with

retaining clips on doors. Insert clips

into notches and slide handle

down until it contacts bottom

trim.

3. Replace top door trim and

Phillips screws.

4. Repeat instructions 1-3 to install

other handle.

To avoid possible injury and damage to property,

tape decorative panels (select models) securely into

place before removing door handles.

WARNING

To Remove:

1. Release top door trim by removing

Phillips screws from top of fresh food

door and retain screws for later use.

2. Grasp handle firmly with both hands.

Slide handle upward

approximately 3⁄4" to release.

3. Repeat instructions 1-2 to

remove other handle.

To Reinstall:

1. Repeat in reverse order.

Door Clip

Wide-by-Side™ Handles

To Install:

1. Align fresh food handle with trim

retainer and door clip.

2. Make sure the tabs of the handle clip

are below the tabs of the door clip.

3. Rotate the handle so that the handle is

flat against the door (see page 6).

4. The tab on the lower part of the handle

will align with the hole in the handle

cap.

5. Slide handle upward until it clicks.

6. Snap top of handle into trim retainer

clip.

7. Repeat for freezer handle.

To Remove:

1. Protect the area above the handle

trim with tape. Insert the tip of a flat blade

screwdriver between the handle trim and door

panel. Carefully pry the trim away from the door

panel.

2. Pull trim free from the trim retainer.

3. Insert door removal card (or 1⁄32" thick plastic card))

between the handle and door panel (approximately

11⁄2").

4. Grasp the handle firmly and pull downward to

remove.

5. Repeat for freezer handle.

Installation

Installing Front-Mounted Handles for

Stainless Steel

1. Loosen lower door clip on door with

1⁄4" hex nut driver.

2. Locate predrilled hole at base of

handle, and fit hollow end of

handle over lower door clip.

3. Fit other end of handle over upper

door clip and slide up as far as

possible.

NOTE: If top of handle does not

fit over top clip, loosen lower clip

further until fit can be

accomplished.

4. Insert 1⁄4" hex nut driver into

predrilled hole at base of handle

to tighten screw. Insert screw

plug into hole, as illustrated.

5. Repeat above steps to install

other handle.

Removing Front-Mounted Handles for

Stainless Steel

1. Remove plastic button plug at

base of handle with a very small

flat-blade screwdriver.

•Insert 1⁄4" hex nut driver into

predrilled hole to remove

screw.

2. Slide handle down and remove

from bottom door clip.

3. Repeat above steps to remove

other handle.

Installation

Leveling

To protect personal property and refrigerator from

damage, observe the following:

•Protect vinyl or other flooring with cardboard, rugs,

or other protective material.

•Do not use power tools when performing leveling

procedure.

CAUTION

To enhance the appearance and maintain performance,

the refrigerator should be level.

Note

•Complete any required door reversal, panel

installation and/or a water supply connection,

before leveling.

5. Using the carpenter’s level, make sure front of

refrigerator is 1⁄4" (6 mm) or 1⁄2bubble higher than

back of refrigerator and that the refrigerator is level

from side to side.

6. If required, correct rocking of refrigerator by

turning rear adjustment screw clockwise to raise

rocking corner. If doors are uneven, do the

following:

•Determine which

door needs to be

raised.

•Turn front roller

adjustment screw (A)

clockwise to raise

front corner of door.

•If one refrigerator door has reached the limit of

its adjustment range and doors are still not level,

raise or lower the opposite door by turning roller

adjustment screw counterclockwise.

•Check with level to verify 1⁄4" tilt to the back for

proper door closure.

•If refrigerator is aligned and stable, replace toe

grille and hinge covers.

7. Replace bracket cover(s).

•Position cover into the outer edge of the hinge.

•Swing the cover toward the cabinet and snap it

into place.

8. Replace the toe grille.

4. Turn both rear adjustment screws (B) clockwise to

raise and counterclockwise to lower the rear of the

refrigerator.

Materials Needed

•3⁄8" hex head driver

•Carpenter’s level

1. Remove toe grille.

•Grasp firmly and pull bottom

outward to unclip.

2. Remove bottom bracket cover(s).

•Place the eraser end of a pencil or similar blunt

tool in the cover notch.

Notch

Location

•Use slight pressure to pry the

cover loose.

•Continue to maintain

downward pressure to the

notched side of the cover while

swinging it off.

3. Using hex head driver, turn both of the front

adjustment screws (A) clockwise to raise and

counterclockwise to lower the front of the

refrigerator.

Note

•For proper reinstallation, ensure the “top” marking

on the interior of the toe grille is oriented correctly.

•Align the toe grille mounting clips with the lower

cabinet slots.

•Push the toe grille firmly until it snaps into place.

Inhaltsverzeichnis

Andere Maytag Kühlschrank Handbücher

Maytag

Maytag MFT2771XEM1 Bedienungsanleitung

Maytag

Maytag MCD2257HEB - 21.6 cu. Ft Bedienungsanleitung

Maytag

Maytag RSD2400 Bedienungsanleitung

Maytag

Maytag MSD2574VEB11 Bedienungsanleitung

Maytag

Maytag Performa 61004966 Bedienungsanleitung

Maytag

Maytag W10321480A Bedienungsanleitung

Maytag

Maytag MFT2672AEM Bedienungsanleitung

Maytag

Maytag French Door Refrigerator Bedienungsanleitung

Maytag

Maytag MFI2266AE - 21.8 cu. Ft Stücklistenhandbuch

Maytag

Maytag W10285879A Bedienungsanleitung

Maytag

Maytag MSD2574VEA - 25.2 cu. Ft. Refrigerator Bedienungsanleitung

Maytag

Maytag MSS26C6MFZ Bedienungsanleitung

Maytag

Maytag MFX2876DRM Bedienungsanleitung

Maytag

Maytag M1TXEMMWB - 21.0 cu. Ft. Top Freezer... Bedienungsanleitung

Maytag

Maytag MBF1956KEB11 Fehlerbehebungshandbuch

Maytag

Maytag MBR2556KES - 25.1 cu. Ft. Bottom-Freezer... Benutzerhandbuch

Maytag

Maytag MCB2256HEB - 22 cu. Ft. Refrigerator Handbuch

Maytag

Maytag MSD2574VEB Montageanleitung

Maytag

Maytag MITXEGMY Bedienungsanleitung

Maytag

Maytag MFF2055YEB00 Bedienungsanleitung

Maytag

Maytag MBR1956KES - Bottom Freezer Refridgerator Benutzerhandbuch

Maytag

Maytag Built-in Refrigeration Bedienungsanleitung

Maytag

Maytag MFI2067AEB12 Bedienungsanleitung

Maytag

Maytag MFX2876DRH00 Kurzanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung