Maytag ST Series Bedienungsanleitung

UPC

W11572554A

Certied by

International Association of Plumbing and Mechanical O󰀩cials (IAPMO) R&T

NSF/ANSI 42, 44, 61 & 372 · IPC · IRC

Reference Performance Data Sheet

WATER TREATMENT SYSTEM

OPERATION MANUAL

ST SERIES

TABLE OF CONTENTS

WATER TREATMENT SYSTEM SAFETY ...................................................................................................... 3

INTRODUCTION .............................................................................................................................................. 4

Main Parts .......................................................................................................................................................... 4

INSPECTION .................................................................................................................................................... 5

Valve Layout ....................................................................................................................................................... 6

Mineral Tank ....................................................................................................................................................... 6

PARTS AND FEATURES ................................................................................................................................. 6

Control Layout .................................................................................................................................................... 6

Brine Tank........................................................................................................................................................... 6

EQUIPMENT DIMENSIONS ............................................................................................................................ 7

SYSTEM LAYOUT ............................................................................................................................................ 8

SYSTEM SPECIFICATIONS ........................................................................................................................... 9

Location Requirements..................................................................................................................................... 10

INSTALLATION INSTRUCTIONS ................................................................................................................. 10

Electrical Requirements.................................................................................................................................... 10

Mechanical Requirements.................................................................................................................................11

General Requirements ......................................................................................................................................11

EQUIPMENT INSTALLATION ....................................................................................................................... 11

Bypass Valve Operation ................................................................................................................................... 12

Brine Line and Safety Brine Valve ................................................................................................................... 13

Connections...................................................................................................................................................... 13

Safety Brine Valve Assembly ........................................................................................................................... 13

................................................................................................................ 14

Media Volume, Salt and Capacity Settings....................................................................................................... 15

Cycles and Softening Set Up............................................................................................................................ 15

SYSTEM OPERATION ................................................................................................................................... 17

Cycle Sequence ............................................................................................................................................... 19

Softener System Setup..................................................................................................................................... 20

User Display Settings ....................................................................................................................................... 25

Diagnostics....................................................................................................................................................... 27

Valve History..................................................................................................................................................... 29

PLACING WATER SYSTEM INTO OPERATION ........................................................................................ 31

................................................................................................................ 35

DRAWINGS AND PART NUMBERS ............................................................................................................. 35

Control Valve - Front Cover and Drive Assembly ............................................................................................. 36

Brine Tank Assembly and Parts List ................................................................................................................. 37

Mineral Tank Assembly, Valve Cover, and Parts List........................................................................................ 38

Control Valve - Drive Cap, Piston, Regenerant Piston, and Stacker Assembly................................................ 39

Control Valve - Injector Cap and Injector......................................................................................................... 40

 ............................................................................................ 41

.................................................................................................................... 42

Water Meter, Meter Plug, and Mixing Valve...................................................................................................... 43

Bypass Valve .................................................................................................................................................... 44

Bypass Fitting Packages .................................................................................................................................. 45

BYPASS FITTING PACKAGES .................................................................................................................... 45

Bypass Fitting Packages .................................................................................................................................. 46

Bypass Fitting Packages .................................................................................................................................. 47

Bypass Fitting Packages .................................................................................................................................. 48

Bypass Fitting Packages .................................................................................................................................. 49

TROUBLESHOOTING ................................................................................................................................... 50

PERFORMANCE DATA SHEET ................................................................................................................... 56

PERFORMANCE DATA SHEET ................................................................................................................... 57

Warranty ........................................................................................................................................................... 58

Notes ................................................................................................................................................................ 59

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and

tell you what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance.

Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word

“DANGER” or “WARNING.” These words mean:

DANGER

WARNING

WATER TREATMENT SYSTEM SAFETY

IMPORTANT:

result in personal injury or damage to the equipment.

This purpose of this installation manual is to guide the

installer through the installation and operation process of

MAYTAG®

This manual is a reference and not included in every

system installation situation. The technician installing this

equipment must have:

Training in the MAYTAG®series controllers.



proper control settings.

Basic plumbing skills.

The directional instructions “left” and “right” are

determined by looking at the front of unit.

Inspect the unit for damage or missing parts.

Contact your supplier if any discrepancies exist.





Brine Well Assembly

Water Bypass

Plumbing Connectors

Left Right

INTRODUCTION

Outlet

Main Parts

Inlet

Figure 1: Typical Inlet/Outlet Piping and

Valves for Proper Startup and Servicing

Outlet

Treated

Water

Supply

Inlet

Untreated

Water

Supply

Remove system from carton:

1. Remove the box top from the system.

2. 

3. 󰀨

4. Remove the components from the shipping carton (bypass box, brine tube assembly, plumbing

connectors & brine tubing)

5. 

To assemble the Salt Tank:

1. 

One to a drain and one to the valve.

2. 

3. 

4. 

holes in the side of the brine tank.

5. 

IMPORTANT: 

back quickly, the particles may enter the valve. If this happens, the valve may need to be disassembled and

cleaned.

1. Stand the tank up and in position.

2. 

Figure 2

INSPECTION



inspected for damage.

If any parts are damaged or missing, contact your supplier.

IMPORTANT:

1. Tank Jacket Cover 5. Mineral Tank

2. Tank Jacket Sleeve 6. Upper Basket

3. Tank Jacket 7. Distributor Asy

4. Valve

1. Rell Flow Control Fitting 3. Untreated Water Inlet

2. Drain Fitting 4. Treated Water Outlet

1. Face Cover Assembly 4. Drive Bracket Asy

2.Circuit Board 5. Drive Gear 12x36

3. Motor 6. Drive Gear Cover

1. Cover 6. Air Check

2. Brine Tank 7. Float

3. Brine Well 8. Brine Valve Asy

4. Brine Well Cap 9. Tubing

5. Overow Fitting

PARTS AND FEATURES

Figure 3

Figure 4

Figure 5

Figure 6

Valve Layout Control Layout

Mineral Tank Brine Tank

Dimensions 10 x 44” Tank

(25.4 x 111.76 cm)

1 0 x 5 4 ” T a n k

(25.4 x 137.16 cm)

13 x 54” Tank

(33.02 x 137.16 cm)

A 44.25” (112.39 cm) 54.25” (137.79 cm) 54.25” (137.79 cm)

B 52.0” (132.08 cm) 62.0” (157.48 cm) 62.0” (154.9 cm)

C 41.25” (104.77 cm) 41.25” (104.77 cm) 41.25” (104.77 cm)

D 52.0” (132.08 cm) 62.0” (157.48 cm) 62.0” (157.48 cm)

E 47.0” (119.38 cm) 57.0” (144.78 cm) 57.0” (144.78 cm)

F 32.0” (81.28 cm) 32.0” (81.28 cm) 32.0” (81.28 cm)

G 35.31” (89.68 cm) 35.31” (89.68 cm) 35.31” (89.68 cm)

EQUIPMENT DIMENSIONS

9.7 (24.6)

16.0 (40.6)

25.7 (65.2)

11.5 (29.2)

Inlet - Outlet

3 (7.6) on Center

NOTE:

7 (17.7) height for

removal of valve cover

Figure 7: Equipment Dimensions

Dimensions are given in: In (cm)

Figure 8: Standard Basement Before Installation (Cold water lines shown)

SYSTEM LAYOUT

Outside

Faucet

Kitchen

Toilet

Bath

Tub Lavatory

Water

Heater

Hot Water

Outlet

Outside

Faucet

Laundry Tub

Pump

Meter

Floor Drain

Figure 9: Treated Water Flow Diagram

Hot Water

Outlet

Outside

Faucet

Outside

Faucet

Kitchen

Toilet

Bath

Tub Lavatory

Grounding

Strap

Untreated Water

Treated Water

Water

Rener Laundry Tub

Water

Heater

Pump

Meter

Floor Drain

Untreated WaterUntreated Water

Treated WaterTreated Water

Model Number 3M-ST32-XXX 3M-ST40-XXX 3M-ST48-XXX 3M-ST64-XXX 3M-ST80-XXX

Recharge Style     

Mineral Tank Size 10” x 44” 10” x 54” 10” x 54” 13” x 54” 13” x 54”

Resin Volume 1.00 ft³ 1.25 ft³ 1.50 ft³ 2.00 ft³ 2.50 ft³

Recharge (Salt) Tank Size 16” x 40” 16” x 40” 16” x 40” 16” x 40” 16” x 40”

Salt Storage 338 lbs 338 lbs 338 lbs 338 lbs 338 lbs

Drain Water Rate 2.7 gpm 2.7 gpm 2.7 gpm 4.2 gpm 4.2 gpm

Service Connection Size 1” NPT 1” NPT 1” NPT 1” NPT 1” NPT

Drain Connection Size     

Recharge (Brine) Connection

Size

    

Typical Installation Space

Requirement

28”W x 20”D x 62”H 28”W x 20”D x 72”H 28”W x 20”D x 72”H 28”W x 20”D x 72”H 28”W x 20”D x 72”H

Shipping Weight 104 lbs 121 lbs 134 lbs 174 lbs 199 lbs

Model Number 3M-STR32-XXX 3M-STR32XC-XXX 3M-STR40-XXX 3M-STR64-XXX

Recharge Style    

Mineral Tank Size 10” x 44” 10” x 54” 10” x 54” 13” x 54”

Resin Volume 1.00 ft³ 1.00 ft³ 1.25 ft³ 2.00 ft³

Recharge (Salt) Tank Size 16” x 40” 16” x 40” 16” x 40” 16” x 40”

Salt Storage 338 lbs 338 lbs 338 lbs 338 lbs

Drain Water Rate 2.7 gpm 2.7 gpm 2.7 gpm 4.2 gpm

Service Connection Size 1” NPT 1” NPT 1” NPT 1” NPT

Drain Connection Size    

Recharge (Brine) Connection

Size

   

Typical Installation Space

Requirement

28”W x 20”D x 62”H 28”W x 20”D x 72”H 28”W x 20”D x 72”H 28”W x 20”D x 72”H

Shipping Weight 116 lbs 127 lbs 133 lbs 192 lbs

SYSTEM SPECIFICATIONS

There are no user serviceable parts in the AC adapter,

motor, or PC board, in the event of a failure, these parts

must be replaced.

All electrical connections must be completed

according to the local codes.



the appliance.

Plug the AC adapter into an electrical outlet that is not







Indoor Location Requirements

IMPORTANT:

For indoor location of the Water Treatment System, make





Make sure to maintain the space to access the

equipment for maintenance and adding regenerant

(salt) to brine tank.

Operating ambient temperature: 34°F-120°F

(1°C-49°C).





120 psi (1.38 bar - 8.27 bar).

Maintain constant electrical supply to operate the

control.





Local drain for discharge as close as possible to the

appliance.

󰀨

Must meet any local and state codes for site of

installation.

Valve is designed for minor plumbing misalignments.



Make sure that all the soldered pipes are fully cooled

before attaching plastic valve to the plumbing.

Outdoor Location Requirements

IMPORTANT:

Place the unit at the dry location only, unless listed as



use.





important measures are taken for outdoor location as



Moisture - Water projected by a nozzle against

󰀨

operation of the machine.

Direct Sunlight

fade or discolor over time. The integrity of the material





INSTALLATION INSTRUCTIONS

Location Requirements

Electrical Requirements

Temperature - Extreme hot or cold temperature









󰀨

unreadable but the control must continue to function.

When the temperature returns to normal operating





applications.

Insects and Dust - The controller and valve have

been designed to keep all but the smallest insects out

of the critical areas. Dust is not totally avoidable, but

󰀩



cover is recommended.

Inhaltsverzeichnis

Andere Maytag Wasserfiltersystem Handbücher

Maytag

Maytag MWF4100AWS Bedienungsanleitung

Beliebte Wasserfiltersystem Handbücher anderer Marken

Wisy

Wisy LineAir 100 Bedienungsanleitung

Schaffner

Schaffner Ecosine FN3446 Series Betriebsanleitung

Pentair

Pentair FLECK 4600 SXT Benutzerhandbuch

H2O International

H2O International H20-500 Bedienungsanleitung

Renkforce

Renkforce 2306241 Bedienungsanleitung

Neo-Pure

Neo-Pure TL3-A502 Bedienungsanleitung

FLTR

FLTR OBF Bedienungsanleitung

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Bedienungsanleitung

Applied Membranes

Applied Membranes W-G844EM Bedienungsanleitung

BEGA

BEGA 116 Bedienungsanleitung

WATA

WATA Standard Bedienungsanleitung

Price

Price FFU series Handbuch

Gaggenau

Gaggenau BRITA INTENZA 467873 Bedienungsanleitung

Brita

Brita SAFF-100 Bedienungsanleitung

HEISSNER

HEISSNER FPU24000-00 Bedienungsanleitung

BGS technic

BGS technic 1518 Bedienungsanleitung

Reverse Osmosis

Reverse Osmosis RF Series Bedienungsanleitung

ubbink

ubbink Filtramax Series Bedienungsanleitung