Maytronics MCC8-UNI Bedienungsanleitung

1English

Robot Pool Cleaner by Maytronics

User Instructions

Guide d’utilisation

Istruzioni per l’uso

Instrucciones para el Usuario

Bedienungsanweisungen

DEU

MCC8-UNI

8151247, 1/2011

1English

What You’ll Find Inside the Box

Part X Comment

Base frame for ﬁlter elements 2

Ultra-ﬁne ﬁlter 4 ﬁlters

Bag for ﬁlters storage 1

Spring ﬁlter 4 ﬁlters

“S” clip 4

Power supply unit 1

Robot Pool Cleaner 1

Caddy kit 1

Optional components available on request

from your Robot Pool Cleaner distributor

Section 1 - Description of Main Components

1. Filters

Dual-level ﬁltration system:

Spring ﬁlter + base frame

For dirty pools with large debris such as

leaves etc. – Useful for beginning of season.

Ultra-ﬁne ﬁlter cartridge + base frame

For day-to-day use.

Factory default.

2. Brushes

There are three types of optional brushes, each designed to provide optimal traction on different pool surfaces.

Only one type set is provided with your Robot Pool Cleaner.

PVC Brush

For concrete, PVC, ﬁberglass and liner.

Combined Brush

For rough ceramic surface and mosaic tiles.

Wonder Brush

For smooth ceramics.

Power supply Unit

Robot Pool Cleaner

Filter and cartridges

English

3. Power supply unit

Digital, “Switch-Mode” power supply:

Input - 100-250 AC Volts•

50-60 Hertz•

180 Watt•

Output - 30 VDC•

IP 54•

Section 2 – Robot Pool Cleaner Operation

Part 1 – Preparing the Robot Pool Cleaner for Use

A. Assemble the Caddy kit – you will ﬁnd the instructions in a separate document

B. Adjusting the handle ﬂoat angle

The handle angel must be adjusted to determine the speed that the Robot Pool Cleaner advances along the water-line.

1. Lay the handle down at an angle of 180º to the ground.

2. Push the base of the arm into the body of the

Robot Pool Cleaner and slide it towards the rear of the

Robot Pool Cleaner until it clicks into the required position.

Normal advance

More efﬁcient cleaning action on water-line.

Fast advance

Fast speed – For faster but less efﬁcient cleaning

action on water-line.

Push in here Slide here

Push in here

Slide here

On/Off

switch

3English

C. Laying out the cable

Unwind minimal required cable to cover the entire pool size, straight the cable along the pool side.

Make sure there are no twists or kinks.

Part 2 - Into the water

Inserting the Robot Pool Cleaner into the pool.

Place the Robot Pool Cleaner into the pool and release the handle.

Note: When using the Combined brushes or Wonder brushes, gently squeeze the Wonder brush material until it is totally wet.

Only use the original supplied power supply unit.

The Power supply unit is splash proof – do not immerse it in water.

Unplug the power supply unit before any servicing activity.

Do not plug the power supply unit in before placing the pool cleaner in the water.

Ensure the mains outlet is protected by a ground fault interrupter (GFI) or an earth leakage interrupter (ELI).

Important : Do not enter the swimming pool while the pool cleaner is working.

3 Meters

10 feet Swivel

English

Turning the Robot Pool Cleaner ON

Part 3 - Taking the Robot Pool Cleaner out of the water

Unplug power supply before any servicing activity.

If the Robot Pool Cleaner has not ﬁnished its cycle,1.

turn off the power supply unit and unplug the mains.

Pull the ﬂoating cable gently until the Robot Pool Cleaner2.

has risen to the surface, then lift by the handle.

Plug the ﬂoating cable from1.

the Robot Pool Cleaner

into the power supply unit.

Plug the electrical cable from the power2.

supply unit into the mains.

Press the ON/OFF switch3.

The Robot Pool Cleaner4.

will now start to work.

Important: Do NOT lift the Robot Pool Cleaner from the water by its cable.

Floating cable

On/Off

switch

Note : If your model includes the remote control unit, please refer to the included instruction leaﬂet.

Important : Do not enter the swimming pool while the pool cleaner is working.

5English

Section 3 - Routine Maintenance

Part 1 - Extracting and cleaning the ﬁlter elements

Unplug power supply before any servicing activity.

Reassembling the ﬁlter elements

Insert the locating tabs at the bottom of the

ﬁlter element into their groves on the base frame,

then close the “S” clip.

Locating tab

Locating tab groove

2 3

English

Reinstall the ﬁlters according to the diagram

DO NOT FORCE THE FILTERS INTO PLACE.

Part 2 - Dismantling and cleaning the impeller

Unplug power supply before any servicing activity.

Dismantle the impeller cover and

clean around the impeller housing,

then reassemble.

Grooved end ﬁtting Octagonal end ﬁtting

Important: Where applicable, you must reset the full ﬁlter bag indicator on the power supply unit.

Recommendation: Rinse all brushes with clean water after each cleaning cycle.

Coil the cable and store in dry cool area – preferably on the Caddy if available.

Do NOT store the Robot Pool Cleaner exposed to direct sunlight.

Do NOT store the Robot Pool Cleaner exposed to excessive heat.

Do NOT store the Robot Pool Cleaner exposed to frost.

Section 4 – Storage Advice

7English

Troubleshooting Guide

Before contacting your Robot Pool Cleaner distributor please read through this guide.

The pool water condition must be within the following parameters:

PH: 7.0 – 7.8 NaCl: Max 5,000 ppm

Temperature: 6˚C(43˚F) to 34˚C(93˚F) Chlorine: Max 4 ppm

Symptom Solution

Cable twisting or cable coils up Check for any obstruction in the pool

Remove excess cable from the pool

Make sure ﬁlter cartridge is clean

Straighten cable and lay it in the sun periodically

Robot Pool Cleaner is moving in circles or does not reach all pool

areas

Check for foreign objects in moving parts

Make sure Filter elements are clean and that the ﬁlter

doors are closed

Make sure that there is enough cable laid out to cover

the whole pool

Before using the Robot Pool Cleaner at the beginning of the

season you should brush any algae from the ﬂoor and walls of the

pool

Robot Pool Cleaner is not traveling sideways on walls Adjust the diagonal angle of the handle

Robot Pool Cleaner does not climb walls Make sure the ﬁlter cartridge is clean

If using the Robot Pool Cleaner at the beginning of the season,

use the spring cartridge

If using the Robot Pool Cleaner at the beginning

of the season you should ﬁrst brush any algae from

the ﬂoor and walls of the pool

Check if brushes are suitable for pool coating and replace

them if necessary

Check if brushes are worn and replace them if necessary

Make sure the impeller area is clean

When applicable: Check that the RCU is set for climbing

Robot Pool Cleaner not sinking Make sure the Wonder brushes or the combined brushes

are soaked in water

Robot Pool Cleaner disengaging from wall at water line If Robot Pool Cleaner climbs too high consult your

Robot Pool Cleaner distributor

RCU is not working When applicable: Check if the batteries need replacing

Motor is not working

Check if the impeller is blocked

Check if the drive system is blocked

Electrical problem (power supply), check power source.

If power source is in order, please contact your

Robot Pool Cleaner distributor

Additional troubleshooting is available at our Website:

www.maytronics.com

French

Liste des pièces fournies dans l’emballage

Pièces X Remarques

Châssis des composants du ﬁltre 2

Filtre ultraﬁn 4 ﬁltres

Poche de rangement des sacs ﬁltres 1

Filtre pour nettoyage de printemps 4 ﬁltres

Crochet en “S” 4

Bloc d’alimentation 1

Robot nettoyeur de piscine 1

Kit Caddy 1

Les éléments optionnels sont disponibles sur demande

de la part de votre distributeur de robots nettoyeurs de piscines

Chapitre 1 - Description des principaux composants

1. Filtres

Système à double ﬁltrage:

Filtre Printemps (pour nettoyage de

printemps) + châssis

Pour piscines sales contenant des saletés de

grande taille, par ex. des feuilles – utile en

début de saison.

Cartouche de ﬁltre ultraﬁn + châssis

A usage quotidien.

Réglage d’usine, déﬁni par défaut.

2. Brosses

Trois types de brosses sont proposés en option, chacune d’elles étant conçue pour fournir une traction optimale sur différentes

surfaces de piscine. Un seul ensemble brosse est fourni avec votre robot nettoyeur de piscine.

Brosse PVC

pour surfaces en béton, PVC, ﬁbre de verre

et à revêtement.

Brosse combinée

pour surface rugueuse en céramique et

pavés en mosaïque.

Brosse Wonder

pour sols en céramique lisse.

Bloc d’alimentation électrique

Robot nettoyeur de piscine

Filtre et cartouches

Inhaltsverzeichnis

Sprachen:

Andere Maytronics Schwimmbadreiniger Handbücher

Maytronics

Maytronics Dolphin S400 Bedienungsanleitung

Maytronics

Maytronics BASIC 2 Bedienungsanleitung

Maytronics

Maytronics M1 Bedienungsanleitung

Maytronics

Maytronics Dolphin Hybrid RS 1 Bedienungsanleitung

Maytronics

Maytronics Dolphin Liberty 200 Bedienungsanleitung

Maytronics

Maytronics MBC2 Bedienungsanleitung

Maytronics

Maytronics Basic 8 Bedienungsanleitung

Maytronics

Maytronics Ozone Swim Twin Series Bedienungsanleitung

Maytronics

Maytronics Dolphin Deluxe 4 Bedienungsanleitung

Maytronics

Maytronics Dolphin M600 Montageanleitung

Maytronics

Maytronics Dolphin Wave 75 Bedienungsanleitung

Maytronics

Maytronics Dolphin Supreme M3 Bedienungsanleitung

Maytronics

Maytronics Dolphin M700 Bedienungsanleitung

Maytronics

Maytronics Basic 10 Bedienungsanleitung

Maytronics

Maytronics Basic 11 Bedienungsanleitung

Maytronics

Maytronics Atlantis Einrichtungshandbuch

Maytronics

Maytronics Dolphin Liberty 400 Gebrauchsanweisung

Maytronics

Maytronics OzoneSwim 1200i Bedienungsanleitung

Maytronics

Maytronics Dolphin DX Bedienungsanleitung

Maytronics

Maytronics Dolphin Mass 12 Bedienungsanleitung

Maytronics

Maytronics Dolphin Wave 200XL Bedienungsanleitung

Maytronics

Maytronics Dolphin Classic 5 Bedienungsanleitung

Maytronics

Maytronics MTC8-UNI Bedienungsanleitung

Maytronics

Maytronics Liberty Premium 8 Bedienungsanleitung

Beliebte Schwimmbadreiniger Handbücher anderer Marken

CMP

CMP DEL AOP PRO 200 Bedienungsanleitung

GRE

GRE 90397 Bedienungsanleitung

VGE

VGE Blue Lagoon SPA UV-C 12 WATT Bedienungsanleitung

ICHRoboter

ICHRoboter Pool Cleaner Bedienungsanleitung

Pyle

Pyle SereneLife SLPORBT18 Bedienungsanleitung

Steinbach

Steinbach POOLRUNNER 00-61010 Bedienungsanleitung

Aurelaqua

Aurelaqua SWPCLNAURB5WT Bedienungsanleitung

Hayward

Hayward Aquabug Bedienungsanleitung

Hayward Pool Products

Hayward Pool Products MAGIC CLEAN Bedienungsanleitung

Polaris

Polaris 3900 Sport Bedienungsanleitung

GRE

GRE 90399 Bedienungsanleitung

Blue Lagoon

Blue Lagoon UV-C Pro Buster 450.000 l Bedienungsanleitung

fluidra

fluidra Astral Pool Net'N'Clean Bedienungsanleitung

NETSPA

NETSPA RoPool Bedienungsanleitung

Pool Blaster

Pool Blaster iVAC 250 Li Bedienungsanleitung

Intex

Intex 100A Bedienungsanleitung

Davey

Davey Maverick Bedienungsanleitung

fluidra

fluidra ZODIAC FREERIDER RF 5200 iQ Bedienungsanleitung