MC OV-7605-C8 Gebrauchsanweisung

OV-7605-C8

Application Manual

June 2017 1/20 Rev. 1.0

Application

Manual

OV-7605-C8

Low Power Clock Oscillator

32.768 kHz

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 2/20 Rev. 1.0

TABLE OF CONTENTS

1. OVERVIEW..................................................................................................................................................... 3

GENERAL DESCRIPTION......................................................................................................................... 31.1.

APPLICATIONS......................................................................................................................................... 31.2.

ORDERING INFORMATION...................................................................................................................... 41.3.

2. BLOCK DIAGRAM .........................................................................................................................................5

PINOUT ...................................................................................................................................................... 52.1.

PIN DESCRIPTION .................................................................................................................................... 52.2.

DEVICE PROTECTION DIAGRAM ........................................................................................................... 62.3.

3. ELECTRICAL SPECIFICATIONS..................................................................................................................7

ABSOLUTE MAXIMUM RATINGS............................................................................................................ 73.1.

OPERATING PARAMETERS.................................................................................................................... 73.2.

TYPICAL CHARACTERISTICS................................................................................................................. 83.3.

TIMING WAVEFORMS .............................................................................................................................. 83.4.

OSCILLATOR PARAMETERS.................................................................................................................. 93.5.

XTAL FREQUENCY VS. TEMPERATURE CHARACTERISTICS .....................................................9

3.5.1.

4. PACKAGE .................................................................................................................................................... 10

DIMENSIONS AND SOLDER PAD LAYOUT.......................................................................................... 104.1.

RECOMMENDED THERMAL RELIEF .............................................................................................104.1.1.

MARKING AND PIN #1 INDEX................................................................................................................114.2.

5. MATERIAL COMPOSITION DECLARATION & ENVIRONMENTAL INFORMATION...............................12

HOMOGENOUS MATERIAL COMPOSITION DECLARATION ............................................................. 125.1.

MATERIAL ANALYSIS & TEST RESULTS ............................................................................................ 135.2.

RECYCLING MATERIAL INFORMATION .............................................................................................. 145.3.

ENVIRONMENTAL PROPERTIES & ABSOLUTE MAXIMUM RATINGS .............................................155.4.

6. APPLICATION INFORMATION ...................................................................................................................16

OPERATING OV-7605-C8....................................................................................................................... 166.1.

SOLDERING INFORMATION.................................................................................................................. 176.2.

HANDLING PRECAUTIONS FOR MODULES WITH EMBEDDED CRYSTALS ...................................186.3.

7. PACKING & SHIPPING INFORMATION.....................................................................................................19

8. COMPLIANCE INFORMATION ...................................................................................................................20

9. DOCUMENT REVISION HISTORY..............................................................................................................20

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 3/20 Rev. 1.0

OV-7605-C8

Low Power Clock Oscillator 32.768 kHz

1. OVERVIEW

Oscillator with built-in “Tuning Fork” crystal oscillating at 32.768 kHz

Very tight frequency tolerance: ±20 ppm

Excellent oscillator stability: < 3 ppm/V

High shock and vibration resistance

Wide operating voltage range: 1.6 V to 5.5 V

Very low power consumption: typ. 450 nA

Standard operating temperature range TA: -40 to +85°C

CLKOUT enable/disable

Low aging rate

Ultra-miniature ceramic SMT package, RoHS-compliant and 100% lead-free: 2.0 x 1.2 x 0.85 mm

Available for Medical Implantable applications

Automotive qualification according to AEC-Q200 available

GENERAL DESCRIPTION1.1.

The OV-7605-C8 combines an advanced very low power CMOS oscillator circuitry together with a 32.768 kHz

“tuning-fork” crystal in an ultra-miniature ceramic package. No external components are required. The very low

power consumption over a wide supply voltage and temperature range is the key feature of this product.

The frequency output on CLKOUT pin can be enabled/disabled by the CLKOE pin. The CLKOUT frequency is

enabled when CLKOE pin is connected to VDD. When the CLKOE pin is tied to GND the frequency is disabled and

the CLKOUT pin is high impedance (Hi-Z).

The OV-7605-C8 is available for Medical Implantable applications.

APPLICATIONS1.2.

The OV-7605-C8 oscillator module combines very low power consumption with a ultra-small ceramic package:

Smallest oscillator module (embedded XTAL) in a ultra-small 2.0 x 1.2 x 0.85 mm lead-free ceramic

package

Price competitive

The unique size and the competitive pricing make this product perfectly suitable for many applications:

Communication: IoT / Wearables / Wireless Sensors and Tags / Handsets

Automotive: M2M / Navigation & Tracking Systems / Dashboard / Tachometers / Engine Controller

Car Audio & Entertainment Systems

Metering: E-Meter / Heating Counter / Smart Meters / PV Converter / Utility metering

Outdoor: ATM & POS systems / Surveillance & Safety systems / Ticketing Systems

Medical: Glucose Meter / Health Monitoring Systems / Implantable

Safety: Security & Camera Systems / Door Lock & Access Control

Consumer: Gambling Machines / TV & Set Top Boxes / White Goods

Automation: PLC / Data Logger / Home & Factory Automation / Industrial and Consumer Electronics

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 4/20 Rev. 1.0

ORDERING INFORMATION1.3.

Example: OV-7605-C8 -20/+20ppm TA QC

Code

Operating temperature range

TA (Standard)

-40 to +85°C

Code

Qualification

QC (Standard)

Commercial Grade

Automotive Grade AEC-Q200

Medical Grade

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 5/20 Rev. 1.0

2. BLOCK DIAGRAM

OUTPUT

CONTROL

OSC

32.768 kHz

CRYSTAL

CLKOUT

CLKOE

VDD

GND

Hi-Z

PINOUT2.1.

PIN DESCRIPTION2.2.

Symbol

Pin #

Description

CLKOUT

Clock Output; push-pull; controlled by CLKOE. If CLKOE is HIGH (VDD), the CLKOUT pin drives the

square wave of 32.768 kHz. When CLKOE is tied to Ground, the CLKOUT pin is high impedance

(Hi-Z).

GND

Ground.

CLKOE

Input to enable the CLKOUT pin. If CLKOE is HIGH, the CLKOUT pin is in output mode. When

CLKOE is tied to Ground, the CLKOUT pin is high impedance (Hi-Z).

VDD

Power Supply Voltage.

OV-C8 Package: (top view)

7605

#1 #2

#4 #3

#1 CLKOUT

#2 GND

#3 CLKOE

#4 VDD

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 6/20 Rev. 1.0

DEVICE PROTECTION DIAGRAM2.3.

GND

VDD

CLKOUT

CLKOE

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 7/20 Rev. 1.0

3. ELECTRICAL SPECIFICATIONS

ABSOLUTE MAXIMUM RATINGS3.1.

Absolute Maximum Ratings according to IEC 60134:

SYMBOL

PARAMETER

CONDITIONS

MIN

MAX

UNIT

VDD

Power supply voltage

-0.5

6.0

Input voltage

-0.5

6.0

Output voltage

-0.5

6.0

TOPRA

Standard operating temperature TA

-40

°C

TSTO

Storage temperature

Stored as bare product

-55

125

°C

TPEAK

Maximum reflow condition

JEDEC J-STD-020C

265

°C

OPERATING PARAMETERS3.2.

For this Table, VDD = 3.0 V; GND = 0 V; TA = 25 °C; unless otherwise indicated.

Operating Parameters:

SYMBOL

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNIT

Supply

VDD

Power supply voltage

1.6

5.5

VDDSR

VDD slew rate

±0.5

V/ms

IDD

VDD Supply Current. CLKOUT

disabled. (1)

VDD = 3.0 V, TA= 25°C

450

650

VDD = 5.0 V, TA= 25°C

680

900

VDD = 3.0 V, TA= -40 to 85°C

1300

VDD = 5.0 V, TA= -40 to 85°C

1800

Input CLKOE

Input voltage

GND -0.5

VDD +0.5

VIL

LOW level input voltage

GND

0.3 VDD

VIH

HIGH level input voltage

0.7 VDD

VDD

Output CLKOUT

VOH

HIGH level output voltage

IOH = -400 µA, VDD = 1.6 to 5.5 V

VDD –0.4

VOL

LOW level output voltage

IOL = 400 µA, VDD = 1.6 to 5.5 V

GND +0.4

IOZ

Hi-Z leakage current

CLKOE = GND,

CLKOUT = VDD or GND

±100

Output rise time

CL= 10 pF, 10% to 90% VDD

Output fall time

CL= 10 pF, 10% to 90% VDD

tCKH

CLKOUT enable time

(see following diagram)

0.5

µs

tCKL

CLKOUT disable time

(see following diagram)

µs

(1) When CLKOUT is enabled (CLKOE is HIGH) the additional VDD supply current ∆IDD can be calculated as follows: ∆IDD = CLx VDD x fOUT

e.g. ∆IDD = 10 pF x 3.0 V x 32’768 Hz = 980 nA

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 8/20 Rev. 1.0

TYPICAL CHARACTERISTICS3.3.

Supply current IDD vs. Supply voltage VDD: TA= 25°C, CLKOUT disabled

01234 5

VDD [V]

700

500

300

IDD [nA]

100

400

600

200

800

TIMING WAVEFORMS3.4.

CLKOUT enable/disable time:

32.768 kHz

CLKOUT

CLKOE

tCKH tCKL = 0

32.768 kHz

CLKOUT

CLKOE

tCKH = 0

Hi-Z Hi-Z

tCKL = 0

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 9/20 Rev. 1.0

OSCILLATOR PARAMETERS3.5.

For this Table, VDD = 3.0 V; GND = 0 V; TA = 25 °C; unless otherwise indicated.

Oscillator Parameters:

SYMBOL

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNIT

Xtal General

Crystal Frequency

32.768

kHz

tSTART

Oscillator start-up time

500

δCLKOUT

CLKOUT duty cycle

Xtal Frequency Characteristics

Δf/f

Frequency accuracy

±10

±20

ppm

Δf/V

Frequency vs. voltage

characteristics

1.6 V ≤ VDD ≤ 5.5 V

±3

ppm/V

Δf/fTOPR

Frequency vs. temperature

characteristics

TOPR = -40°C to +85°C

VDD = 3.0 V

-0.035ppm/°C2(TOPR-T0)2 ±10%

ppm

Turnover temperature

°C

Δf/f

Aging first year max.

±3

ppm

XTAL FREQUENCY VS. TEMPERATURE CHARACTERISTICS3.5.1.

-180

-160

-140

-120

-100

-80

-60

-40

-20

-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90

∆f/f [ppm]

T0= 25°C (± 5°C)

-0.035 * (T-T0)2ppm (±10%)

Temperature [°C]

Micro Crystal

Low Power Clock Oscillator 32.768 kHz OV-7605-C8

June 2017 10/20 Rev. 1.0

4. PACKAGE

DIMENSIONS AND SOLDER PAD LAYOUT4.1.

OV-C8 Package:

Package dimensions (bottom view): Recommended solder pad layout:

0,85 max 1,2

0,450,45

2.0

0,45 0,45

0,3

0,7 1,1 0,7

0,70,7

Tolerances: unless otherwise specified ± 0.1mm

Drawing: OV-7605-C8_Pack-drw_20170323

All dimensions in mm typical.

RECOMMENDED THERMAL RELIEF4.1.1.

When connecting a pad to a copper plane, thermal relief is recommended.

GOOD BAD

Inhaltsverzeichnis

Andere MC Elektrowerkzeuge Handbücher

MC Fastpack Handbuch

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch