Page 6
●Extra special attention should be applied to Overhead Power Lines. Some of
our machines are capable of reach in excess of 8 metres (26 feet) this means they
have the potential to well exceed, by possibly 3 metres (9’ 9”), the lowest legal
minimum height of 5.2 metres from the ground for 11,000- and 33,000-volt power lines.
It cannot be stressed enough the dangers that surround this capability, it is therefore
vital that the operator is fully aware of the maximum height and reach of the machine,
and that they are fully conversant with all aspects regarding the safe minimum
distances that apply when working with machines in close proximity to Power Lines.
(Further information on this subject can be obtained from the Health & Safety
Executive or your Local Power Company).
●Always disengage the machine, kill the tractor engine, remove and pocket the
key before dismounting for any reason.
●Always clear up all debris left at the work area; it may cause hazard to others.
●Always ensure when you remove your machine from the tractor that it is left in
a safe and stable position using the stands and props provided and secured if
necessary.
WHEN NOT TO USE THIS MACHINE:
●Never attempt to use this machine if you have not been trained to do so.
●Never uses a machine until you have read and understood the operator
handbook, are
familiar with, and practiced the controls.
●Never use a machine that is poorly maintained.
●Never use a machine if guards are missing or damaged.
●Never use a machine on which the hydraulic system shows signs of wear or
damage.
●Never fit, or use, a machine on a tractor that does not meet the manufacturer’s
minimum specification level.
●Never use a machine fitted to a tractor that does not have suitable front, rear
and side(s) cab guarding made of metal mesh or polycarbonate.
●Never use the machine if the tractor cab guarding is damaged, deteriorating or
badly fitted.
