Meanwell KDA-64 Bedienungsanleitung

KDA-64 KNX to DALI Gateway

Instruction Manual

KDA-64 Instruction Manual

Content

1.Using the application program ..............................................................

.................................................................

............................................................

................................................................

.......................................................................

..............

....................................................................

..................................................

.............................................

...............

............................

...

...............................

..............................................................................

.....................................................................................

....................................................................................

..........................................................

................................

.....................................................

....................

2.General product information

2.1 DALI Bus system properties

2.2 KDA-64 product features

3.1 Installing the Plug-In

4.1 Commissioning with KDA-64 via web site or pushbuttons

6.1 Configuration buttons

7.1 Special functions in 'Normal Mode

7.2 Special functions in 'Extended Mode'

7.1.1 Synchronisation with the connected DALI segment

7.1.2 User-friendly names for ECGs and groups

7.2.1 Preparation and planning the DALI commissioning in 'Extended Mode

7.2.2 DALI commissioning in 'Extended Mode'

6.2 Control buttons

6.3 ECG fields

6.4 Group fields

6.5 Information and status fields

4.2 Commissioning with KDA-64 via ETS Plug-In

3.2 Principal structure of the Plug-In

3.3 Operating modes of the Plug-In: DALI commissioning

........

.............................................................................

...........................................................

........................................................................

...........................................

3.General properties of the ETS application program: KDA-64 Plug-In

4.DALI commissioning

5.Display and push-button control

6.Control via web browser

7.ETS Special and commissioning functions

Sep. 2017 Version 0

KDA-64 Instruction Manual

Content

....

................................

.................................................

.......................................

.............................................................

...........................................

..............................................

..........................

..................................................................................

..........................................................

......................................

........................................................

.......................................................

........................................................................

............................................................................

..............................................................................

.............................................................................

................................................................

......................

..................................................................................

...............................................................

7.2.4 Using dummy ECGs in 'Extended Mode'

7.3.1 Using IP for plug-in communication

7.3.2 Parameter templates

7.3.3 DALI configuration data back-up

7.3 General extra functions in the ETS

8.1. Quick exchange of individual ECGs

8.2 Extending the existing system – post-installation

9.1 Normal mode

10.1 Recording operating hours

10.2 Individual fault recognition at ECG level

10.3 Fault analysis at group level

10.4 Fault analysis at device level

11.1 The scene module

9.2 Permanent mode

9.3 Staircase mode

9.4 Night-time mode

9.5 Panic / emergency mode

9.6 Test mode for central battery emergency luminaires

9.7 Burn-in mode

9.8 Operating mode hierarchy

.......................................................

...................................................................

...........................................................

.............................................................................

8. DALI maintenance and expansion

9. Different operating modes

10. Analysis and service functions

11. Scenes and effects

7.2.3 ECG and lamp faults during DALI commissioning in 'Extended Mode'

....................... 52

11.1.1 Scene programming via the scene website

KDA-64 Instruction Manual

Content

..............

........................................................................

......................................................................................

....................................................

.............................................................

..................................................................................

................................................................................

.................................................................

...........................................

....................................................................................

.........................................

....................

...................................

............................................

..............................................

.................................

.............................

............................................

..............................

.............................

.........................................

...............

11.2 The effect module

12.1 Features

13.1 General communication objects

14.1 Device: General settings

14.2 ECG No. xx

14.3 Group No. xx

12.2 Converter inhibit mode

13.2 ECG-related communication objects

12.3 Test mode

13.3 Group-related communication objects

..........................................

...............................................

...................................................................

12. Self-contained battery emergency lamps

13. ETS communication objects overview

14. ETS parameter overview

11.1.2 Scene programming via ETS in 'Extended Mode

11.2.1 Effect programming using the effect website

14.1.1 Parameter page: General Settings

14.1.2 Parameter page: IP Settings

14.1.3 Parameter page: Behaviour

14.1.4 Parameter page: Special Functions

14.1.5 Parameter page: Analysis and Service

14.2.1 Parameter page ECG No. xx

14.2.2 Parameter page: Emergency Settings

14.2.3 Parameter page: Switching Behaviour

14.2.4 Parameter page: Analysis and Service

14.3.1 Parameter page: Group No. xx

11.2.2 Effect programming via ETS in 'Extended Mode'

KDA-64 Instruction Manual

Content

.............................

.............................................................

...........................................................

15. Firmware version and update

16. Reset to conditions at delivery

14.3.2 Parameter page: Switching Behaviour

14.3.3 Parameter page: Analysis and Service

1. Using the application program

Product family: Lighting

Product type: Gateway

Manufacturer: Mean Well

Name: KDA-64

2. General product information

2.1. DALI Bus system properties

The cross-functional DALI-Bus (DALI = Digital Addressable Lighting Interface) is a

system used to control electronic ballasts (ECGs) in lighting technology. The

specifications of the DALI communications interface are set in the international

norm IEC 60929.

The DALI Bus enables the receipt of switch and dim commands. In addition, the

DALI can be used for the notification of a fault status such as light or ECG failure or

for other light status information. In line with the latest DALI standard, devices with

emergency light function (EN 62386-202) are also supported. Status and operating

mode of emergency lights can be monitored and different prescribed testing

procedures can be performed.

Via the connected control device / gateway (Master), up to 64 individual DALI ECGs

(Slaves) can be connected in a DALI segment. When the DALI is commissioned, the

ECGs receive an automatically generated 3byte long address. Based on the long

address a short address between 0 and 63 is assigned during the further

commissioning process. As the address assignment is automatic, the device order

is random. The individual ECGs/lights therefore need to be identified during the

further commissioning process (see below).

The addressing of individual ECGs in the system is either based upon the short

address (individual addressing) or upon a DALI group address (group addressing).

For this purpose, any number of ECGs within a segment can be assigned to up to 16

groups. The group addressing in the DALI system guarantees that switch and dim

processes of different lights within a system are performed simultaneously without

imposition of time delays.

In addition to short and group addresses, the light values of individual DALI ECGs

can also be merged into scenes and addressed via scene addresses.

For a detailed description of the DALI system, please see the DALI handbook at

https://www.digitalilluminationinterface.org/

2.2. KDA-64 product features

The KDA-64 is a device used to control ECGs with a DALI interface via the KNX

installation bus. The device transforms switch and dim commands from the

connected KNX system into DALI telegrams and status information from the DALI

bus into KNX telegrams. The KDA-64 is a Category 1 device (in accordance with EN

62386-103). This means the device must only be used in DALI segments with

connected ECGs and not with other DALI control devices within the segment (no

multi-master function).

Power supply for the up to 64 connected ECGs comes directly from the KDA-64. An

additional DALI power supply is required and permitted.not not

The device comes in a 4TE wide DIN Rail casing so it can be directly integrated into

the mains distribution box.

In addition to the pure gateway functions, the

KDA-64 offers numerous additional features:

● Addressing of 16 DALI groups and/or individual addressing of up to 64 ECGs

● Flexible DALI commissioning concept: directly on the device or via the integrated

web server

● Different operating modes for groups and ECGs such as permanent mode, night-

time mode or staircase mode

● Burn-in mode for each individual light with specific burn-in time settings

● Integrated reader to count the operating hours of each light with an alarm to signify

the end of its life span

● Individual fault recognition with objects for each light/ECG

●Complex fault analysis at group and device level with number of faults and

calculation of fault rates

● Fault threshold monitoring with individually adjustable threshold values

● Scene module for extensive scene programming of groups and individual ECGs

● Effect module for sequence control and light effects

● “Quick exchange function“ for the quick and easy replacement of faulty ECGs

● Test mode for centrally powered emergency light systems

● Support of self contained emergency ballasts-

● Support of testing procedures for emergency lights with date and time stamp

●Integrated web server with extensive commissioning and maintenance

possibilities

● Integrated “visualisation“ via web-browser for direct control and display

3. General properties of the ETS application program: KDA-64

3.1 Installing the Plug-In

The application for the KDA-64 is based on a powerful KNX communications stack

of the System-B type. It is designed as plug-in for ETS-3 ETS-4, and ETS-5. The,

plug-in design means that an additional installation process is necessary. All

program files that are required are automatically set up when you import the

corresponding ETS product file (knxprod file).

After the import the product can be integrated as usual into the ETS. When you first

load the product in the ETS, you need to start the installation of the required plug-in

files by pressing the 'Next' button.

If it didn't pop-up pulg-in setup window during importing KDA-64.knxprod file, you

may find plug-in install as following example:

- Drag KDA-64 into the project e.g. Dining room

- Roll down dining room tab , find “1.1.1 KDA-64”

- Right click “1.1.1 KDA-64”, select “Plug-in” to install plug-in program.

And follow the instructions:

If the installation has been successful, a notification window appears.

And, „open product specific parameter dialog“ is able to be used in parameter tab. If

plug-in didn't be installed properly, this function is not available. Later on we will

discuss more about parameter.

Attention: The PC must have .NET Version 4.0 as a requirement for the installation.

Normally the framework exists on any modern PC. Should an older version of .NET

be installed or no version at all, you need to update .NET first. Please see the

Microsoft website for the required setup.

3.2 Principal structure of the Plug-In

The KDA-64 is a high-functionality product and accordingly offers many different

setting options within the parameters. To make the overview of the parameters as

simple and transparent as possible for the system integrator, there are more

operating levels than with a standard ETS application.

Inhaltsverzeichnis

Andere Meanwell Tor Handbücher

Meanwell

Meanwell DLC-02-KN Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung