Mechatro MTP-850P Bedienungsanleitung
1/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
Direct Thermal Printer
210mm [A4] / 216mm [US Letter]
200 dpi / 300 dpi Printing Resolution
User Manual
MTP-850P / 8100P / 8100P3
2/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
Revision Record
Revision Date Comment
1.0 2007/02/08 First Release.
1.1 2007/03/05 Additional comment added on page 8
Page 8: Power connector on the picture is wrong
1.2 2007/05/11 New description for Windows Driver.
All description regarding Windows Driver features has been
changed. (Section 4.2)
Commands are modified and added.
1.3 2007/08/06 New description for Windows Driver.
Now the driver is available with Auto-installer.
Installation of the driver has been modified.
1.4 2007/09/20 CE certificate is added
FCC certificate is added
1.5 2007/12/15 Paper Specification is changed.
Black mark specification is added.
3/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
Acknowledgments
This document is a publication of
Mechatro, Inc.
459-40 Gasan-Dong, Geumchun-Gu
Seoul, Korea 153-803
Tel +82 2 852 2811
Fax +82 2 852 2810
Web www.mechatro.co.kr
Mechatro,Inc 2007
Copy Rights ⓒ2006 MECHATRO, INC. --- REPUBLIC OF KOREA.
This manual will be updated as, from time to time, printer function or features may be added or
amended.
All features, specifications described are subject to change without notice.
Company and product names are trademarks or registered trademarks of their
respective companies.
All rights reserved. No matter what form, reproduction or modification of this document is forbidden.
This document is carefully written and checked by Mechatro, INC. however, there may be
an omissions or errors. If you see any omissions or errors, please let us know.
* If you see any errors or omissions, please let us know*
4/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
Introduction
About this manual
This manual contains the information required to install the printer and to run it from
the host computer such as PC.
This manual contains the information such as printer specification, DLL commands list,
printer lay-out drawings...etc.
Printer features
MTP-850P/8100P/8100P3 is 8inch (210mm~216mm) paper width direct thermal printer that
features;
z50mm/sec Printing Speed for MTP-850P
z100mm/sec Printing Speed for MTP-8100P and MTP-8100P3
z200dpi Resolution for MTP-850P and MTP-8100P
z300dpi Resolution for MTP-8100P3
z210mm, 216mm Paper Width
zAutomatic-Cutter
zWindows Driver
zStatus Monitoring
zBi-Directional Communication Ready
z8inch Paper Roll Holder (Optional item)
zSerial (RS-232C) Interface and USB 2.0 Interface
z24Vdc Power Requirement
zSelf-Test Facility
zSemi-Auto Paper Loading
zLoop Presenter with Retraction
Application examples
zAutomatic Teller Machine
zCash Dispenser
zVarious Kiosks
zInformation Terminal
zGaming Machine
zMedical Equipments
z…etc.
5/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
Model Classification Chart of MTP-8xxxx Series
Mechanism Printer Printer w/ Presenter Option
200dpi Resolution
50 mm/sec Speed
MTP-850B MTP-850C MTP-850P
200dpi Resolution
100 mm/sec Speed
MTP-8100B MTP-8100C MTP-8100P
300dpi Resolution
100 mm/sec Speed
MTP-8100B3 MTP-8100C3 MTP-8100P3
Optional
8inch
Paper Roll
Holder
MRH-8200
General Safety Information
zFollow all warnings and instruction indicated on the printer
zIf you want to clean the printer, make sure you disconnect the power
zClean the printer with a dry cloth. Do not use the liquid or spray cleaning product
zDo not remove the cutter cover while power is on
zDo not operate the printer near water
zDo not spill liquid over the printer
zDo not install ramp very near the printer
zDo not disassemble and try to fix the printer if you are not trained technician
zDo not modify the printer. It will avoid your warranty
zMake sure you have proper ventilation on your enclosure
zMake sure you install the printer on hard surface and no vibration
zMake sure you give enough space for down looped paper for presenter
zMake sure you give enough space for swing opening covers
zBe careful with your wiring with printer
General Safet
y
Information
6/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
CE Certificates
7/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
FCC Certificates
8/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
TABLE OF CONTENTS
1. General Printer Information
1.1 Components
1.2 Indicators
1.3 Specifications
1.4 Dimensions
2. Installation
2.1 Installation Consideration
2.2 Aligning Paper Roll Holder
2.3 Adjusting paper width
2.4 Adjusting Near-End Sensor Position
2.5 Connecting to the computer
2.6 Connecting the power
2.7 Windows Driver Installation
2.8 Windows Driver Set-Up
3. Operation
3.1 Installing a Paper Roll
3.2 Removing a Paper Jam
3.3 Self-Test Printout
4. Printer Set up
4.1 Text Oriented
4.2 Driver Oriented
4.3 Commands for BeginDOC
4.4 Commands for Your Program
4.5 Status Monitor
4.6 Status Monitoring Program
4.7 Errors and Error Recovery
9/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
1.GeneralPrinterInformation
1.1 Components
A. Exterior View
1. Printer
2. Cutter
3. Presenter with Retractor
4. Motor
5. Keys and LEDs
6. Cutter Cover
7. Presenter Cover
8. Paper Exit Direction
9. Paper Entrance Direction
1
2
3
4
5
7
6
8
9
10/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
B. Exterior View (Left Side)
1. TPH up/down Lever
2. Serial (RS-232C) Interface
3. USB 2.0 Interface
4. Power Connector
1
43
2
The power connector on the picture shows 2-pin
connector. But in our production unit, it is 4-pin
connector. Please refer power connector specification.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Mechatro Drucker Handbücher
