Medeli DD514 Bedienungsanleitung

1Check the include items

Setup Guide

CYMBAL PADS BOX

Cymbal Pad for Hi-Hat Cymbal Pad for Crash1

(with Choke)

Cymbal Pad for Ride

DRUM PADS BOX

KICK PEDAL BOX

STAND AND CYMBAL HOLDER BOX

Pillar (L1) Pillar (R1) Pillar (L2) Pillar (R2)

Center Pipe (1)

Center Pipe (2)

Side Arm (L1)

Side Arm (L2)

WARNING:

Drum key can be pinched when adjusting clamps with drum key. Operate carefully.

Be careful around pipe ends, inside the pipe and screw ends. Metal shavings, etc. May injure your fingers.

Cymbal Holder(L)

Side Arm (R)

Cymbal Holder (R) X 2

1~3

DRUM MODULE BOX

HI-HAT PEDAL BOX

ACCESSORIES BOX

Hi-Hat Holder Drumsticks

Owner’s Manual

AC Adaptor

Pad Mount X 5

Drum Key

Handscrews X 2 Connection Cable X 11

Setup Guide

Hexagon Key

EXTENDED PADS BOX

Cymbal Pad for Crash2

(with Choke)

2Set Up the Stand

Pillar (L1)

Center Pipe (1)

Center Pipe (2)

Pillar (R1)

1. Attach the Center Pipe (1) to the clamp on the Pillar (L1).

2. Attach the Center Pipe (2) to the clamp on the Pillar (L1).

3. Attach the Center Pipe (1) & (2) to the clamps on the Pillar (R1).

4. Attach the Side Arm (L1) to the clamp on the Pillar (L2).

5. Attach the Side Arm (L1) to the clamp on the Pillar (L1).

6. Attach the Side Arm (R) to the clamp on the Pillar (R2).

7. Attach the Side Arm to the clamp on the Pillar (R1).

8. Attach the Side Arm (L2) to the clamp on the Pillar (L1).

Note:

Loosen or tighten the screws on the clamp with drum key as shown partial enlargement.

Adjust the height of the Side Arms with drum key as needed.

(R)

123

Side Arm (L1)

Pillar (L2)

Pillar (R2) Side Arm (L2)

678

Wing Nut 1

Wing Nut 2

9. Attach the pad mounts to the mount holders on

the Center Pipe (1), Side Arm (L2), Side Arm ,

and firmly tighten the respective wing nuts 1.

Note:

Loosen or tighten the wing nuts on the mount

holder as shown partial enlargement.

Move the mount holders as needed, and firmly

tighten the respective wing nuts 2.

(R )

10. Insert the two cymbal holders into the holders on

the Pillars, attach the hi-hat holder to mount

holders on the Side Arm (L1), and firmly tighten

the respective wing nuts .

Note:

Loosen or tighten the wing nuts on the mount

holder as shown partial enlargement.

9 10

(R)Side Arm

3Attach the Parts

Attach the Pads

1. Loosen the wing nuts on the drum pads.

2. Attach the drum pads to the pad mounts,

and firmly tighten the wing nuts on the

drum pads.

Wing Nut

Attach the Cymbal Pads

1. Remove the wing nut and felt

washer from the cymbal tilter.

2. Place the cymbal pad, felt

washer, wing nut 3 assembly as

shown, and tighten the wing nut

3 to obtain an appropriate

amount of sway.

3. Adjust the cymbal pad position

with the wing nut 4.

Note:

Tightentheboltwiththe

hexagonkey asshown

partial enlargement

Wing Nut 3

Felt Washer

Wing Nut 4

Cymbal Tilter

Assemble the Kick

1. Insert the beater to the beater holder on

the foot pedal.

2. Adjust the beater position and tighten

the beater with the drum key.

3. Attach the foot pedal to the kick pad.

4. Adjust the beat position and tighten the

wing nut.

Note:

Position the one beater in the center

of the kick pad or the two beaters

equally apart from the center of the kick

pad as shown.

123

Wing Nut

Put the cymbal on the cymbal

adapter and locate the tap of

the adapter in the slot ofthe

cymbalbottom

Slot

Tap

Tom 2Tom 1

Tom 4

Snare

Ride

Crash 1

Hi-Hat

Hexagon

Key

Tom 3

Crash 2

Connection Procedure

1. Place the kick on the floor in the center of the rack as

shown.

2. Place the hi-hat pedal on the floor on your left side.

3. Connect the pads to the drum module with the marked

cables.

Are you ready? Let's enjoy playing it.

Make connections as shown in the illustration.

4Connect the Pads to the Drum Module

DD514_G05

Attach the Drum Module

1. Connect the cable to the drum module as shown with

handscrews.

2. Attach the drum module to the mount holders on Side

Arm (L1), and firmly tighten the relevant wing nut.

Note:

Adjust the drum module position by moving the mount

holders as needed, and firmly tighten the relevant wing

nut.

Ride

Crash 1

Hi-Hat

Drum Module

Snare

Tom 4

Hi-Hat Control Kick

Tom 1 Tom 2

Tom 3

Crash 2

Crash 1 Ride

Hi-Hat

Drum

Module

Snare

Tom3

Tom4

Tom1 Tom2

Kick

Hi-Hat

Pedal

Tom 4

Crash 2

Inhaltsverzeichnis

Andere Medeli Trommel Handbücher

Medeli

Medeli DD508DX Bedienungsanleitung

Medeli

Medeli DD610S Bedienungsanleitung

Medeli

Medeli AP40 Bedienungsanleitung

Medeli

Medeli DD630 Bedienungsanleitung

Medeli

Medeli DD6 Bedienungsanleitung

Medeli

Medeli DD402 Bedienungsanleitung

Medeli

Medeli MZ528 Bedienungsanleitung

Medeli

Medeli Dd635d Bedienungsanleitung

Medeli

Medeli DD516 Bedienungsanleitung

Medeli

Medeli DD516 Bedienungsanleitung

Medeli

Medeli DD61 Bedienungsanleitung

Medeli

Medeli YoDrum G1 Bedienungsanleitung

Medeli

Medeli DD635 Bedienungsanleitung

Medeli

Medeli DD403 Bedienungsanleitung

Medeli

Medeli DD508DX Bedienungsanleitung

Medeli

Medeli DD620 Bedienungsanleitung

Medeli

Medeli DIGITAL DRUM Bedienungsanleitung

Medeli

Medeli DD638 Bedienungsanleitung

Medeli

Medeli DD401 Bedienungsanleitung

Medeli

Medeli DD400 Bedienungsanleitung

Medeli

Medeli DD630 Benutzerhandbuch

Medeli

Medeli DD504 Bedienungsanleitung

Medeli

Medeli DD518DX Bedienungsanleitung

Medeli

Medeli DD508 Bedienungsanleitung

Beliebte Trommel Handbücher anderer Marken

Yamaha

Yamaha RX-21 Bedienungsanleitung

Roland

Roland TD-9K Bedienungsanleitung

Sudoku

Sudoku LEXUS Bedienungsanleitung

Roland

Roland CR-80 Bedienungsanleitung

V-Drums

V-Drums V-Tour TD-9KX2 Bedienungsanleitung

Yamaha

Yamaha DTXPLORER Bedienungsanleitung

Cherub

Cherub WRW-206 Bedienungsanleitung

Opti-Med

Opti-Med JM-D1 Series Bedienungsanleitung

Roland

Roland CR-80 Bedienungsanleitung

Yamaha

Yamaha DTS70 Bedienungsanleitung

Yamaha

Yamaha DTXPRESS Bedienungsanleitung

Roland

Roland RM-2 Bedienungsanleitung

ATV

ATV aD5 Bedienungsanleitung

Alesis

Alesis DM Pro Kit Bedienungsanleitung

Roland

Roland TR-808 Bedienungsanleitung

Roland

Roland SPD-20 Bedienungs- und Wartungshandbuch

Koma Elektronik

Koma Elektronik RH 301 Bedienungsanleitung

Roland

Roland TR-8 Bedienungsanleitung