Medeli FD900 Bedienungsanleitung

Owner's Manual

DIGITAL DELAY &

REVERB EFFECTS

PEDAL

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:16

INFORMATION FOR YOUR SAFETY!

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING.

Please keep this manual in a safe place for future reference.

Power Supply

Please connect the designated AC adaptor to an AC

outlet of the correct voltage.

Do not connect it to an AC outlet of voltage other than

that for which your instrument is intended.

Unplug the AC power adaptor when not using the

instrument, or during electrical storms.

Connections

Before connecting the instrument to other devices, turn

off the power to all units. This will help prevent

malfunction and / or damage to other devices.

Location

Do not expose the instrument to the following

conditions to avoid deformation, discoloration, or more

serious damage:

Direct sunlight

Extreme temperature or humidity

Excessive dusty or dirty location

Strong vibrations or shocks

Close to magnetic fields

Interference with other electrical devices

Radios and televisions placed nearby may experience

reception interference. Operate this unit at a suitable

distance from radios and televisions.

Cleaning

Clean only with a soft, dry cloth.

Do not use paint thinners, solvents, cleaning fluids, or

chemical-impregnated wiping cloths.

Handling

Do not apply excessive force to the switches or controls.

Do not let paper, metallic, or other objects into the

instrument. If this happens, unplug the AC adaptor from

the wall outlet. Then have the instrument inspected by

qualified service personnel.

Disconnect all cables before moving the instrument.

CAUTION

The normal function of the product may be disturbed

by Strong Electro Magnetic Interference. If so,

simply reset the product to resume normal operation

by following the owner’s manual. In case the function

could not resume, please use the product in other

location.

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:16

Contents

Panel Description

Front Panel

Setup

Battery Replacement Diagram 7

Connection 8

Effects Introduction

Effects List 10

Delay

01. 10 1000ms STEREO DELAY

02. 1000～3000ms STEREO DELAY 11

03. 100～3000ms PAN MOD. DELAY

04. 10～500ms MONO DELAY 11

05. 500～1000ms MONO DELAY 11

06. 1000～6000ms MONO DELAY 11

07. 10～1000ms ANALOG DELAY 11

08. 10～1000ms MODULATED DELAY 12

09. 100～3000ms REVERSE DELAY 12

10. 100～12000ms SOUND ON SOUND DELAY

Reverb

01. ROOM I REVERB...

02. ROOM II REVERB

03. HALL I REVERB

04. HALL II REVERB

.........................................................

............................

.........................................................

......................................................

..........................10

.......................

.......................11

................................

............................

..........................

....................

.......................

.......12

.........................................14

..............................................14

.............................................14

～

05. HALL III REVERB 14

06. CHURCH REVERB 14

07. SPRING REVERB 14

08. PLATE REVERB 14

09. REVERSE REVERB 14

10. GATE REVERB 14

11. MODULATE REVERB 14

Store and Recall Patches

Storing Your Favorite Tones 15

Recalling the Saved Memories 6

Advanced Use

Footswitch Control Mode 17

Effect Trails Mode 18

Bypass Pan Mode 19

Troubleshooting 22

Specifications 24

Appendices

Setting Samples 25

..........................................

.......................................

.........................................

...........................................

......................................

.............................................

....................................

............................

.......................1

................................

...........................................

Tap Tempo Delay............................................

............................................

................................................

..............................................

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:17

Panel Description

Front Panel

14 13

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:17

Panel Description

1. REVERB MODE Knob:

Select one kind of reverb among the 11 reverb

modes.

2. REVERB LEVEL Knob:

Control the effect level of reverb.

3. REVERB TIME Knob:

Control the delay time of reverb.

4. REVERB TONE Knob:

Control the tone of reverb.

5. DELAY TIME Knob:

Control the delay time.

6. DELAY F.BACK Knob:

Control the feedback of delay.

7. DELAY MODE Knob:

Select one kind of delay among the 10 delay

modes, or to select the patch memory function.

8. DELAY LEVEL Knob:

Control the effect level of delay.

9. PATCH MEMORY Buttons:

Press and hold anyone of the PATCH

MEMORY buttons to store your favorite tones.

When the “DELAY MODE” knob on the M

position is selected, press any PATCH

MEMORY button to recall the tone you stored.

10. ON/OFF LED:

Indicate the on/off status of the unit.

11. FOOTSWITCH:

Press the switch to turn effects on and off or

for patch memory selection.

12. POWER Jack:

Plug the 9V power adaptor into this jack.

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:17

13. INPUT Jack:

IN-L(MONO): Connect your guitar to this jack.

Connect a guitar cable to this jack for power

supply when using a battery.

IN-R: Connect another guitar to this jack.

Notice：

You can also connect a stereo signal to this 2

combinational input jack, such as keyboard,

synth, electronic drum, audio player, and so on.

14. OUTPUT Jack:

OUT-L(MONO): Connect this output jack to

your guitar amplifier.

OUT-R: Connect this output jack to another

amplifier.

Notice：

You can also send this 2 combinational output

jack's stereo signal to amplifier, mixer, audio

interface, or another effect processor.

Panel Description

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:17

Setup

Battery Replacement Diagram

Warning:

1. A 9V battery must be installed

before you plug the mono audio cable into

the input jack.

2. While the power supply is low, the LED will

extinguish. Please replace the battery

accordingly.

3. Turn the guitar amplifier off before plugging

and unplugging cables, otherwise

tremendous noise might be produced and

the unit might be damaged as well.

(optional)

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:17

Connection

1. Connect the optional power supply to the

power jack or insert a 9V battery (optional)

into the battery compartment on the bottom.

2. Connect your guitar to input jack and an

amplifier to output jack of the Pedal.

3. The Pedal will automatically switch on after a

cable is plugged into its L-input jack when

using a battery.

Use only the appropriate adaptor with the

correct voltage and with a center NEGATIVE

polarity. Some adaptors are made with a

different polarity or voltage, which may

damage the unit if it has been falsely used in

connection.

AC Adaptor

OUT DC 9V

OUT L (MONO)

OUT L

OUT R

Amplifier II

Amplifier I

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:18

OUT L

OUT R

Amplifier II

Amplifier I

AC Adaptor

OUT DC 9V

Connection

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:18

Effects Introduction

This is a digital delay and reverb effects pedal,

contains 10 excellent delay effects and 11 excellent

reverb effects. It also includes the storage

function, allows you to store and recall up to 4 patch

memories.

Effects List

NO.

DELAY MODE

10~1000ms STEREO DELAY

1000~3000ms STEREO DELAY

100~3000ms PAN MOD. DELAY

10~500ms MONO DELAY

500~1000ms MONO DELAY

1000~6000ms MONO DELAY

10~1000ms ANALOG DELAY

10~1000ms MODULATED DELAY

100~3000ms REVERSE DELAY

200~12000ms SOUND ON SOUND DELAY

NO.

REVERB MODE

ROOM I REVERB

ROOM II REVERB

HALL I REVERB

HALL II REVERB

HALL III REVERB

CHURCH REVERB

SPRING REVERB

PLATE REVERB

REVERSE REVERB

GATE REVERB

MODULATE REVERB

100

aw_FD900_Manual_G07_101105

2010󾾠󾾠11󾾠󾾠5󾾠󾾠 16:54:18

Inhaltsverzeichnis

Andere Medeli Musikpedal Handbücher

Medeli

Medeli FD500 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung