MediaTech ICON 3G MT4214 Bedienungsanleitung
Quick Guide
iCon 3G
4 in 1 3G Hotspot,
Power Bank, Router, Access Point
MT4214
2
EN
Introduction
Thank you for buying this incredibly versatile device: 3G wireless router, WiFi repeater
and power bank (for charging other USB devices like smartphone, mp3 player, etc.)
Please take a moment and read this manual before using the device.
Overview
3G Modem USB port/
Charging port
RJ45 port (Recognition of
WAN/LAN automaticaly)
Battery Indicator Button
DC Power Mini USB
Charging Light
ON
Charge
OFF
Status
Light
Battery Indicator Light
RESET
3
EN
Charging internal battery
Device has built-in rechargeable battery, it can work on itself power supply (switch R)
or work as power supply for other devices (switch C). To charger internal battery plug
USB cable to DC input socket, charger light will be on. After few hours charger light will
be o – battery is full. You can keep cable plugged in when working in normal mode
(switch R).
Using as power supply (power bank function)
Turn switch into C position and plug USB device to 3G modem/charging port. You can
always check battery level by pressing battery indicator button.
Using in normal mode
Turn switch into R posi-
tion. Open network con-
nection setup, right click
WiFi card icon, select
“properties” and then
“TCP/IPv4 properties”,
make sure that you are
using automatic con-
guration method when connect-
ing to WiFi network – both options
should be on “obtain IP address
automatically”.
4
EN
Scan for available WiFi networks
From the list select “WIFI-E8BE” and enter default password “12345678”
When connection is established a sta-
tus “connected” will appear.
Now you can enter in the web browser following
address: 192.168.10.1
Enter default login“admin” and password “admin”.
5
EN
You will see management website with “Status” tab.
6
EN
Go to to “Mode” tab to check available modes. To switch mode mark it and press “Apply”.
Smart mode is a default mode of device. If you plug 3G modem it will automatically
work as “3G wireless router”, if you plug ethernet cable it will work as “standard wireless
router”. Device will congure automatically, you only need to check 3G settings when
working with 3G modem.
7
EN
Working with 3G modem (smart mode)
Plug 3G modem to device, at “Status”tab you will see information about modem
Now go to “3G” tab, select
your UMTS operator from
dropdown list. If your op-
erator is not listed – select
“user dened” and enter
manually parameters, fol-
lowing example is for ref-
erence only. Click “Apply”
when nished.
8
EN
Go to “Status” tab, check “WAN info” section. Following screen is for reference only.
Now every client connected to “WIFI 8EBE” network has local and internet access.
9
EN
Working when internet is provided by local LAN network (smart mode)
You can use this option in hotel room to establish your own WiFi network with internet
provided by hotel. Plug ethernet cable into device, at “Status” tab you will see informa-
tion
Now every client connected to “WIFI 8EBE” network has local and internet access.
10
EN
Working as WiFi Repeater (wireless AP client mode)
In this mode you can wirelessly connect to another WiFi router with internet connection
and expand this network. Set “Wireless AP Client Mode” and press “Apply”.
When refreshed click “Wi-WAN” tab
Inhaltsverzeichnis
Sprachen:
Andere MediaTech WLAN-Router Handbücher
