Medion Car Audio Bedienungsanleitung

GB 20

Contents

Installation..........................................................................................21

Take out screw before installation........................................................21

DIN Front-Mount (Method A) ...............................................................21

Installing the unit.........................................................................21

Removing the unit.......................................................................22

DIN Rear-Mount (Method B)................................................................23

Using the detachable front panel .........................................................24

Wiring Connection ...............................................................................25

Operation............................................................................................26

Switching on/off the unit and illuminating ............................................26

Faceplate release ................................................................................26

Sound adjustment................................................................................26

Loudness .............................................................................................27

Display .................................................................................................27

Equalization .........................................................................................28

Liquid crystal display (For LCD version only) ......................................28

Flashing LED .......................................................................................28

Reset function......................................................................................28

Radio operation .................................................................................28

Searching to radio mode.............................................................28

Selecting the frequency band .....................................................28

Selecting station .........................................................................28

Automatically memory storing & program scanning

.......................29

Station storing.............................................................................29

Frequency scan (for without seven color LCD version only)..................

RDS (Radio Data System) operation..........................................29

EON TA LOCAL Mode ........................................................................30

EON TA DISTANCE Mode ..................................................................30

CD operation ......................................................................................31

Switching to CD mode ................................................................31

Selecting tracks ..........................................................................31

Pausing playing ..........................................................................31

Previewing all tracks...................................................................31

Repeating the same track...........................................................31

Playing all tracks in random........................................................31

Ejecting a disc.............................................................................31

MP3 operation (For with MP3 operation version only)...................32

Switching to CD (MP3) mode .....................................................32

Ejecting a disc.............................................................................32

Selecting tracks in single step ....................................................32

Selecting directory up/down........................................................32

Pausing playing ..........................................................................32

Previewing all tracks...................................................................32

Repeating the same track...........................................................32

Playing all tracks in random........................................................32

Selecting tracks by AMS/MP3 button..........................................32

Display information .....................................................................33

Mixed-CD operation (for with mixed-CD operation version only)

.............

Disc notes ............................................................................................34

Specification ........................................................................................35

Trouble shooting................................................................................36

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 20

GB 21

Installation

53 mm

182 mm

30°

Take out screw

before installation

Notes:

• Choose the mounting location

where the unit will not interfere

with the normal driving function of

the driver.

• Before finally installing the unit,

connect the wiring temporarily

and make sure it is all connected

up properly and the unit and the

system work properly.

• Use only the parts included with

the unit to ensure proper installation.

The use of unauthorized parts

can cause malfunctions.

• Consult with your nearest dealer

if installation requires the drilling

of holes or other modifications of

the vehicle.

• Install the unit where it does not

get in the driver's way and cannot

injure the passenger if there is a

sudden stop, like an emergency

stop.

• If installation angel exceeds 30°

from horizontal, the unit might not

give its optimum performance.

• Avoid installing the unit where it

would be subject to high tem-

perature, such as from direct

sunlight, or from hot air, from the

heater, or where it would be sub-

ject to dust, dirt or excessive

vibration.

DIN FRONT/REAR-MOUNT

This unit be can properly installed

either from "Front" (conventional DIN

Front-mount) or "Rear" (DIN Rear-

mount installation, utilizing theraded

screw holes at the sides of the unit

chassis). For details, refer to the

following illustrated installation

methods.

Take out screw before intallation

Before install the unit, please remove

the two screws.

DIN FRONT-MOUNT (METHOD A)

Installing Opening

This unit can be installed in any dash-

board having an opening as show

below:

Installing the unit

Be sure you test all connections first,

and then follow the steps to install the

unit.

1. Make sure the ignition is turned

off, and then disconnect the cable

from

the vehicle battery's negativ

(-) terminal.

2. Disconnect the wire harness and

the antenna.

3. Press the release button on the

front panel and remove the

control panel (see the steps of

¨using the detachable front

panel¨).

4. Lift the top of the outer trim ring

then pull it out to remove.

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 21

GB 22

Installation

Mounting Bolt

Hex Nut

Plain Washer

Trapping Screw

Spring Washer

Metal Strap

Screwdriver

Sleeve

Dashboard

Tabs

L Key

Sleeve

R Key

5. The two supplied keys release

tabs inside the unit's sleeve so

you can remove it. Insert the keys

as far as they will go (with the

notches facing up) info the

appropriate slots at the left and

right sides of the unit. Then slide

the sleeve off the back of the unit.

Mount the sleeve by inserting the

sleeve

into the opening of the

dashboard and bend open the

tabs located around the sleeve

with a screwdriver. Not all tabs

will be able to make contact, so

examine which ones will be most

effective. Bending open the

appropriate tabs behind the

dashboard to secure the sleeve in

place.

7. Reconnect the wire harness and

the antenna and be careful not to

pinch any wires or cables.

8. Slide the unit into the sleeve until

it locks into place.

9. To further secure the unit, use the

supplied metal strap to secure the

back of the unit in place. Use the

supplied hardware (Hex Nut (5

mm) and Spring Washer) to

attach one end of the strap to the

mounting bolt on the back of the

unit. If necessary, bend the metal

strap to fit your vehicle's moun-

ting area. Then use the supplied

hardware (Tapping Screw (5 x 25

mm) and Plain Washer) to attach

the other end of metal strap to a

solit metal part of the vhicle under

the dashboard. This strap also

helps ensure proper electrical

grounding of the unit. Note to

stall the short threading terminal

of the mounting bolt to the back of

the unit and the other long threa-

ding to the dashboard.

10. Reconnect the cable to the

vehicle battery's negative (-)

terminal. Then replace the outer

trim ring and install the unit’s front

panel (see the steps of ¨using the

detachable front panel¨).

Removing the unit

1. Make sure the ignition is turned

off, then disconnect the cable

rom the vehicle battery’s negative (-)

terminal.

2. Remove the metal strap attached

the back of the unit (if attached).

3. Press the OPEN button to slide

down the front panel.

4. Lift the top of the outer trim ring

then pull it out to remove it.

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 22

GB 23

Installation

Side View showing

Scew Holes marked

T, N or S

Factory Radio

Mounting Bracket

Screw

Dashboard or Console

5. Insert both of the supplied keys

into the slots at the middle left

and right sides of the unit, then

pull the unit out of the dashboard.

DIN REAR-MOUNT (Method B)

If your vehicle is a Nissan, Toyota or

uzuki, follow these mouning instructions.

Use the screw holes marked

T (Toyota), N (Nissan) or S (Suzuki)

located on both sides of the unit to

fasten the unit to the factory radio

mounting brackets supplied with your

vehicle.

To fasten the unit to the factory radio

mounting brackets:

1. Use a screwdriver to loose the

hook’s screws on the front left

and right sides of the unit and

remove the hooks.

2. Align the screw holes on the

bracket with the screw holes on

the unit, and then tighten the

screws (5 x 5 mm) on each side.

Note:

The outer trim ring, sleeve and the

metal strap are not used for method B

installation.

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 23

GB 24

Using the detachable front panel

Front Panel

Protective Case

Open

The right side

The left side

Front Panel

The right side

The left side

Front Panel

To detach the front panel

1. Press the OPEN button, then the

front panel will be folded down.

2. To remove the front panel, lift it up

at a little angle from horizontal

position, then first pull out the

right side and then pull out the left

side.

3. For safekeeping, store the front

panel in the supplied protective

case immediately after being

removed.

To install the Front Panel

1. To install the front panel, first

insert the left side into proper

position. Then insert the right side

into place.

2. When the two sides are fixed into

place, push the front panel into

main unit.

3. Note that if the front panel fails to

lock in position properly, pressing

control button may not function

and the display may be missing

some segments. Press the OPEN

button and then reinstall the front

panel again.

Precautions when handling

1. Do not drop the front panel.

2. Do not put pressure on the

display or control buttons when

detaching or re-installing the front

panel.

3. Do not touch the contacts on the

front panel or on the main unit

body.

It may result in poor electrical

contact.

4. If any dirt or foreign substances

adhered on the contacts, the can

be removed with a clean and dry

cloth.

5. Do not expose the front panel to

igh temperatures or direct sunlight

in anywhere.

6. Keep away any volatile agents (e.

. benzene, thinner, or insecticides

)

from touching the surface of the

front panel

7. Do not attempt to disassemble

the front panel.

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 24

GB 25

Wiring connection

Note: 1. For 2-speakers system, green, violet, White/black and grey/black

wire leads are unconnected and isolated.

2. For 2-speakers system keep the fader indicator at center position

to maintain the existing volume level.

Antenna connector

Ignition switch

(ACC+) red

pink

black

yellow

blue/black

blue

green/black

green

Memory

Back-up (B+)

Ground (B-)

Power

Antenna

front left

speaker

white/black

white

grey/black

grey

rear right

speaker

left white

right red

Main Unit

rear RCA cable

front right

speaker

rear left

speaker

Fuse

4-Speakers System2-Speakers System

left

speaker

blue

green

2-Speakers System4-Speakers System

right

speaker

white

grey

(For RCA line out version only)

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 25

GB 26

Operation

VOL

(Volume)

BAS

(Bass)

TRE

(Treble)

BAL

(Balance)

FAD

(Fader)

TA SEEK or ALARM PI SOUND or MUTE

MASK DPI or ALL RETUNE L or S

BEEP 2'nd, ALL or OFF

SWITCHING ON/OFF THE UNIT

(for LCD version only)

Switch on the unit by pressing any

button (except OPEN button (7) and

EJECT button (4). When system is

on, press PWR button (9) shortly to

control the brightness of LCD. Press it

for several seconds to turn off the

unit.

FACEPLATE RELEASE

Press OPEN button (7) to fold down

the removable faceplate.

SOUND ADJUSTMENT

Press SEL button (10) shortly to

select the desired adjustment mode.

The adjustment mode will change in

the following order:

By rotating the volume up button

(11) or volume down button

(12), it

is possible to adjust the desired

sound quality. Press SEL button (10)

for several seconds, it is activated as

cyclical mode of following functions

for user's selection.

a) TA SEEK or TA ALARM

- TA SEEK mode:

When newly tuned station does

not receive TP information for

several seconds, the radio

retunes to next station which has

not the same station (PI) as the

last station, but has the TP

information. When TP information

gets lost at the current station for

retune time which is set by

RETUNE SHORT (30 sec.) or

RETUNE LONG (90 sec.), the radio

start to retune to next same PI

station.

When same PI station does not

catch in 1 cyclic search, the radio

retunes to next station with TP

information.

- TA ALARM mode:

When this mode is selected, any

automatic retune mode is not

activated. Only double beep

sound (ALARM) is output. When

newly tuned station does not

have TP information for several

seconds, beeps come out. When

TP information gets lost at the

current station for retune time, the

beep sound is out-putted.

When newly tuned station has not

RDS signal, "PI SEEK" is

suppressed somewhat.

b) PI SOUND or PI MUTE

hile AF switching is implemented

in C201 station, AF can switch to

100 MHz, which is non genuine

AF (where different PI with same

AF) in short "DIP".

If a car cruises that critical area

back and forth, an oscillation

phenomenon can be occurred,

because the different PI code can

be received from 100 MHz with

"XXX" PI. The car radio has

special procedure to reduce even

this kind of unavoidable situation

however ther is a limit to be

escaped from this serious case

perfectly. In that serious case, 2

mode is selectable as folows:

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 26

GB 27

Operation

100 90

PI: C201

100

PI: XXX

In that serious case, 2 mode is

selectable as follows:

- PI SOUND mode:

When above different PI sound

(DIP) is heard once in a while, the

DIP's sound will be heard for a

short time.

- PI MUTE mode:

Under above same situation, a

mute sound will be heard for a

short time.

c) RETUNE L or RETUNE S mode

The initial time of automatic TA search

ord PI search modes is selected.

When PI information is not caught for

retune time, the radio starts to retune

to next same PI station. When some

PI station does not catch 1 cyclic

search, the radio goes to last station

and waits for several minutes until PI

code is received.

- RETUNE L mode:

Selected as 90 seconds.

- RETUNE S mode

Selected as 30 seconds.

d) MASK DPI or MASK ALL mode

The AF frequency (which has

different PI or NO RDS signal

with high field stength) is masked

during checking PI when the unit

searches AF. The unit doesn't

earch this AF (DIP) for few minutes.

In the case of the AF of NO RDS

signal with high field stength, if

the real AF is wrongly masked as

DIP by some interference, the

unit hestitates to search real AFs.

For this reason, the unit has the

user option (MASK DPI) which

doesn't mask the AF of NO RDS

signal with high field strength.

In MASK DPI mode, the wrong

sound or long mute (according to

PI SOUND or PI MUTE) can be

heard from the AF station which

has NO RDS signal and of which

the field strength is higher than

that of the currently tuning AF

(

station). But, these phenomenons

are rare and the user will hardly

hear the wrong sound in whole

Europe.

- MASK DPI mode:

Masked only the AF which

has different PI.

- MASK ALL mode:

Masked the AF which has

different PI and NO RDS

signal with high field.

BEEP 2'ND, BEEP ALL, OFF mode

The situatuion of beep sound is

selected. The 3 mode is selected

as also by pressing the volume

up button

(11) or volume down

button (12).

- BEEP 2'nd mode:

The beep is only generated

when all allowed double key

is pressed long (1 sec).

e.g.

When preset button (14) is

pressed. When BND/LOUD

button (13) is pressed.

- BEEP ALL mode:

The beep is generated when

every key is pressed.

- BEEP OFF mode:

The beep is disabled.

LOUDNESS

Press BND/LOUD button (13) for

several seconds to reinforce the bass

output. Press it for several seconds

again to release this function.

DISPLAY

Press DSP button (15) to operate as

the conversion of each display mode

as follows:

- In case of receiving a RDS station:

In radio mode:

-> PS -> CT -> FREQ -> PTY ->

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 27

GB 28

Operation

FM1 FM2 FM3 MW LW

FLAT CLASSIC POP M JAZZ DSP OFF

In CD mode:

-> CD -> CT -> PS -> FREQ -> PTY ->

- In case of no receiving CT or PTY

information, the display shows as

"NO CLOCK" or "NO PTY".

In case of receiving a non RDS

station

In radio mode:

-> NO CLOCK -> FREQ -> NO PTY ->

In CD mode:

-> CD -> CT -> FREQ -> NO PTY ->

Each displaying time is several

seconds,

and come back to 1'st

position after several seconds.

Notes

- CT = clock time

- FREQ = frequency

EQUALIZATION

Press EQ button (26) to turn on

equalization function and to select

desired audio mode. There are five

kinds of mode as below:

(FOR LCD VERSION ONLY)

LIQUID CRYSTAL DISPLAY

(for LCD version only)

Exhibit current frequency and activated

functions on the display (8).

FLASHING LED

If the front panel does not install in the

main unit, the LED (27) will be flashing.

RESET FUNCTION

RESET button (28) must be activated

with either a ballpoint pen or thin

metal object. The button is to be

activated for the following reasons:

- Initial installation of the unit when

all wing is completed.

- All the function buttons do not

operate.

- Error symbol on the display.

Note:

If press RESET button (28), the unit

can't work yet, please use a cotton

swab soaked in isopropyl alcohol to

clean the socket on the front panel.

RADIO OPERATION

• Searching to radio mode

Press MODE button (6) shortly to

select radio mode, the radio

mode appears in the display

together with the memory band

and frequency.

• Selecting the frequency band

At radio mode, press BND/LOUD

button (13) shortly to select the

desired band.

The reception band will change in

the following order:

• Selecting station

Press MANU/SKIP

button (16)

or MANU/SKIP

button (17)

shortly to activate automatic seek

function. Press for several

econds until "MANUAL" appeares

on the display, the manual tuning

mode is selected. If both buttons

have not pressed for several

seconds, the will retune to seek

uning mode and "AUTO" appeares

on the display.

• AUTOMATICALLY MEMORY

STORING & PROGRAM SCAN-

NING

- Automatic memory storing

Press AMS button (18) for

several seconds, the radio

searches from the current

frequency and checks the

signal strength until one

cycle search is finished. And

then 6 strongest stations are

stored into the corresponding

preset number button.

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 28

GB 29

Operation

PTY MUSIC GROUP PTY-Kategorie

SPEECH PTYoff

PTY MUSIC GROUP PTY-Kategorie

SPEECH PTYoff

- Program scanning

ress AMS button (18) shortly

to scan preset station. When

the field strength level is

more than the threshold level

of stop level, the radio is

holding at that preset number

for several seconds with

release mute, then searches

again.

• STATION STORING

Press any one of the preset

buttons (14) (1 to 6) to select a

station, which had been stored in

the memory. Press this button for

several seconds (until 2'nd beeps

come out), current station is

stored into the number button.

• FREQUENCY SCAN

Press SCAN button (25) to set the

func

tion to frequency scan mode,

which scans stations and stop for

everal seconds at each receivable

signal. Press SCAN button (25)

again to stop scanning.

•RDS (Radio Data System) operation

- Setting RDS mode

Press AF/REG button (3) and

release immediately to swich

on or off RDS mode.

Whenever RDS is switch on,

symbol "AF" appears on the

dislay.

Program name is displayed

on receiving a RDS station.

"AF" starts blinking if the

broadcasting signal getting

worse.

"ALARM" will be displayed

hen an emergency broad-

casting is received, meanwhile

sound output level will be

adjusted to the preset output

level automatically when the

volume control is set at

minimum.

- Regional Program Operation

Press AF/REG button (3) for

several

seconds to switch on or off

region mode.

Some broadcasting

stations change their program

from normal broadcasting to

regional broadcasting for a cer-

tain time period. When region is

on, the current listening program

remains unchanged. When regi-

on is off, it allows the reception

moves to the regional station.

- Using PTY to select program

PTY button (1) is operated as

follows:

hile selecting PTY engagement

its selection is implemented by

preset buttons as described in

notes.

When PTY is selected, the radio

starts to search corresponding

PTY information, and stops if the

corresponding PTY information is

detected.

If corresponding PTY information

is not existed any more, PTY

engaging is automatically exit to

normal mode.

Note:

When PTY mode is engaged, the PTY

switch is shared as follows:

According to above 2 allotted group,

the preset number is used for PTY

selection as follows:

MUSIC group

* POP M, ROCK M

* EASY M, LIGHT M

* JAZZ, COUNTRY

* NATION M, OLDIES

* FOLK M, SPEECH group

* NEWS, AFFAIRS, INFO

* SPORT, EDUCATE, DRAMA

* CULTURE, SCIENCE, VARIED

* WEATHER, FINANCE, CHILDREN

* SOCIAL, RELIGION, PHONE IN

* TRAVEL, LEISURE, DOCUMENT

Manual_41049_GB 29.04.2004 0:25 Uhr Seite 29

Andere Handbücher für Car Audio

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Medion Autoradiosystem Handbücher

Medion

Medion MD 82694 Bedienungsanleitung

Beliebte Autoradiosystem Handbücher anderer Marken

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 Bedienungsanleitung

Clarion

Clarion PU-9836A Bedienungsanleitung

Sony

Sony MEX-BT5750U Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AR0M Bedienungsanleitung

Sony

Sony RM-X7BT Bedienungsanleitung

Insignia

Insignia NS-HD5113 Bedienungsanleitung

Clarion

Clarion BTD3341 Bedienungsanleitung

USA SPECS

USA SPECS PA11-VW6 Bedienungsanleitung

Sony

Sony MEX-N4380BT Bedienungsanleitung

Kenwood

Kenwood KCD-BT6544U/UY Bedienungsanleitung

JVC

JVC KD-DB912BT Bedienungsanleitung

Philips

Philips CSQ405/98 Bedienungsanleitung

Alpine

Alpine TDM-7544 Bedienungsanleitung

Autotek

Autotek TransAm TA 1400 Bedienungsanleitung

Clarion

Clarion PN-3124N-A Bedienungsanleitung

Denso TEN

Denso TEN FT0108A Bedienungsanleitung

Pyle

Pyle PLD57MU Bedienungsanleitung

Harman

Harman Chrysler Radio Navigation System RB4 Bedienungsanleitung