Medion MD 80383 Bedienungsanleitung

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Scope of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Inserting batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Programming device codes . . . . . . . . . . . . . . . . . . . . . . . 10

Entering the device code according to the Code List . . . . 10

Manual code search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Automatic search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Code searching by brand name . . . . . . . . . . . . . . . . . . . . . 13

Code identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Normal operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Operating individual devices . . . . . . . . . . . . . . . . . . . . . . . 15

Recording with the video recorder . . . . . . . . . . . . . . . . . . 15

Operating combined devices . . . . . . . . . . . . . . . . . . . . . . . 16

Learn function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Notes on learn function . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Programming the functions . . . . . . . . . . . . . . . . . . . . . . . . 18

SHIFT function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Deleting functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Programming macros . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Incorporating delays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Executing macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Deleting macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Univ-FB_MD80383_AUS.fm Seite 2 Dienstag, 24. Januar 2006 8:57 08

Special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ALL OFF function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Easy ProGramming and TV Channel Preview . . . . . . . . . . . 22

Universal functions (“Punch Through”) . . . . . . . . . . . . . . . . 23

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Univ-FB_MD80383_AUS.fm Seite 3 Dienstag, 24. Januar 2006 8:57 08

Overview

Univ-FB_MD80383_AUS.fm Seite 4 Dienstag, 24. Januar 2006 8:57 08

Univ-FB_MD80383_AUS.fm Seite 5 Dienstag, 24. Januar 2006 8:57 08

Univ-FB_MD80383_AUS.fm Seite 6 Dienstag, 24. Januar 2006 8:57 08

Safety instructions

Before using the remote control for the first time, please

read these instruction carefully. Keep the instructions in a

safe place for reviewing purposes or for passing them on to

third parties.

The appliance is not intended for use by young children or infirm

persons without supervision.

Young children should be supervised to ensure that they do not

play with the appliance.

Do not attempt to repair the remote control yourself.

The universal remote control has a class 1M infrared diode.

Do not examine the laser with optical instruments!

Do not subject your remote control to dust, strong sunlight,

moisture, high temperatures or strong vibrations.

Never use old and new batteries together.

Do not use any corrosive or aggressive cleaning products.

Scope of application

This universal remote control can replace up to eight normal remote

controls and is able to operate the following device types:

TV Television set with video text, projector

VCR Video recorder

DVD DVD player and DVD recorder

CD CD player

CBL Pay TV decoder

ASAT Analogue satellite receiver

DSAT Digital satellite receiver

AUX for additional devices (amplifier, tuner, MD, etc.)

The names on the TV, VCR, etc. source keys are only for

overview purposes. Of course, you may assign the keys to

other device types (“Flex Mode”).

Univ-FB_MD80383_AUS.fm Seite 7 Dienstag, 24. Januar 2006 8:57 08

Inserting batteries

2 micro batteries LR03 AAA are required. We

recommend using alkaline batteries for

longer durability.

`Remove the battery compartment cover

by pushing the clip in the direction of the

cover.

`Insert both batteries into the

compartment while observing the +/-

polarity.

`Replace the cover.

If the batteries have been inserted correctly, the time display 0:00 will

appear in the display.

The programmed settings (codes, learn function and macros)

will remain stored in the universal remote control when you

remove the batteries. Date and time will be retained during

battery change but the internal clock will not continue to run

without the batteries and will need to be reset after the batteries

have been inserted.

Setting the date and time

Set the date and time using both SET and T/D keys below the display.

To do so, insert a sharp object, such as an unbent paperclip, into the

depressions.

1. Press SET twice. The number 12.will appear in the display.

2. Continue pressing T/D,until the current month appears.

3. Press SET to save the month and to call up the settings for the

date.

4. Continue pressing T/D,until the current date appears.

5. Press SET to save the date and to call up the settings for the

hours.

Univ-FB_MD80383_AUS.fm Seite 8 Dienstag, 24. Januar 2006 8:57 08

Time settings in 24 and 12 hour mode

An ‘H’ in the display indicates the 24-hour mode.

If you press the T/D key beyond “24”, an ‘A’ will appear. You are now

in the morning hours of the 12-hour mode.

If you press

the T/D

key beyond “12”, a ‘P’ will appear. You are now in

the afternoon hours of the 12-hour mode.

6. Continue pressing T/D,until the current hour appears.

7. Press SET once to save the hour and to call up the settings for the

minutes.

8. Continue pressing T/D,until the current minute appears.

9. Press SET once more and the set time will be displayed.

10. Press T/D to start the clock (the double dots will flash at one-sec-

ond intervals).

Displaying the date and time

After completing the settings, the time will be displayed.

To display the date for a few seconds, briefly press the T/D key.

If you would like to see alternating date and time, press SET. To shut

off this function, continue pressing T/D until the time is displayed.

Displaying the seconds

When the clock appears in the display, you can display the seconds

by pressing T/D twice.

When the date appears in the display, you can display the seconds

by pressing T/D once.

Using SET, you can set the seconds display to “0”.

T/D takes you back to the time.

Univ-FB_MD80383_AUS.fm Seite 9 Dienstag, 24. Januar 2006 8:57 08

Programming device codes

For every device that you would like to operate using the universal

remote control, you must program a three-digit device code to a

source key (TV, VCR, DVD, CD, CBL, ASAT, DSAT, AUX) . The names

on the keys are only for reminder purposes. You can assign any key

to any device (“Flex Mode”).

For combined devices (e.g. TV set with video recorder, TV set with

DVD player, DVD and video recorder) it is often necessary to assign

two source keys with the respective code for each part of the device.

However, there are also combined devices with only one code for

both device parts (see also “Operating combined devices”, page 16).

Entering the device code according to the Code

List

The codes of the corresponding devices can be found in the Code

List enclosed with these operating instructions. Proceed as follows:

1. Switch the relevant device on manually.

2. Keep the S (SETUP) key pressed down for approx. 3 seconds, the

background lighting of the source key will flash for a short time

and then remain permanently lit. 1(Briefly pressing the SETUP

key will activate the SHIFT function.)

3. Briefly press the desired source key (TV, VCR, DVD, CD, CBL,

ASAT, DSAT, AUX) 2.

4. Enter the three-digit code from the Code Table.

The background lighting will extinguish briefly each time the key

is pressed.

1. Only the source key that was actuated last will light up. During

first use, the TV key will light up.

2. The names above the keys are only for reminder purposes. You

can assign any key to any device (“Flex Mode”).

Univ-FB_MD80383_AUS.fm Seite 10 Dienstag, 24. Januar 2006 8:57 08

If the entered code was valid, the light of the source key will

extinguish after the last digit has been entered. If an invalid code was

entered, the source key will flash for three seconds before

extinguishing.

If the device does not respond as expected, repeat the programming,

or try a different code. Please try all the codes specified for your

brand. Select the code that causes all the available commands of

your remote control to respond correctly!

If this is not successful either, then try using the search method

described in the chapter "Automatic Search".

Manual code search

Carry out a manual search as follows:

1. Switch the relevant device on manually.

2. Keep the S (SETUP) key pressed down for approx. 3 seconds, the

background lighting of the source key will flash for a short time

and then remain permanently lit. (Briefly pressing the SETUP key

will activate the SHIFT function.)

3. Briefly press the desired source key (TV, VCR, DVD, CD, CBL,

ASAT, DSAT, AUX).

4. Keep pressing the (up to 350 times) ,PROG+ or PROG– or

PLAY (VCR only) key until the device that is to be controlled

switches off, changes channels, or responds accordingly. The

code search begins at the currently stored three-digit number.

5. Briefly press OK or ENTER to save the code.

Due to the considerable quantity of different code numbers, up

to 350 different codes are pre-programmed per device type. In

individual cases it may be possible that only the most common

main functions are available. For some particular device

models, the described method may not lead to success.

The code search for VCR's must be done while a tape is inserted and

played back. Please note.

Univ-FB_MD80383_AUS.fm Seite 11 Dienstag, 24. Januar 2006 8:57 08

Inhaltsverzeichnis

Andere Medion Fernbedienung Handbücher

Medion

Medion 83388 Bedienungsanleitung

Medion

Medion MD4689 Bedienungsanleitung