Folding a frame with the seat unit
To fold the frame with the seat unit, the seat must be in the forward facing
position (36). First fold the footrest completely under the seat (37), then fold the
handle down 90 degrees (38). Next, press the backrest adjustment so it is folded
at against the seat (38). Finally, press buttons on both sides of the frame and
fold the handle down until it is folded and locked in the position shown (39).
Car seat
To t the car seat onto the stroller frame, rst plug the adapters into the slots on
both sides of the frame until your hear a ‘click’ (41-A). Next, line the car seat up
with the adapters and insert into the adapter sockets, until your hear a ‘click’(42).
To remove the seat, press the buttons on both sides and pull the seat upwards
(43). To remove the adapters, press the lock button located on the inside of
adapters and pull upwards(41-B).
ATTENTION! To mount the car seat onto the frame, rst mount the adapters into
the frame slots.
ATTENTION! Before installing the seat, make sure that the adapter is correctly
installed on the stroller frame.
ATTENTION! The seat is designed for children up to 13 kg body weight.
ATTENTION! Before using the stroller make sure the seat is correctly installed.
