2.1 General
▪Always follow the local safety regulations that apply to
work with high-voltage equipment.
▪Read and comply with the following safety instructions.
Symbols on the instrument
Caution, refer to accompanying docu-
ments.
Protective conductor terminal.
WEEE, Waste Electrical and Electronic
Equipment. Please utilize your local
WEEE collection facilities in the dispo-
sition of this product and otherwise
observe all applicable requirements.
The unit can also be returned to Megger
at any time at no charge for the disposal.
2Safety
2.2 Safety instructions
WARNING
1Always make certain that the DC system in the
substation is disconnected before connecting
B10E.
2Always ground the B10E.
3Before connecting B10E, turn off its master ON/
OFF switch.
4Only connect B10E to an outlet protected with
max 16 A overcurrent protection
5High voltage/current on input/output terminals.
6Do not attempt to service the instrument your-
self. Opening or removing covers may expose
you to dangerous voltage. If you attempt to
service the instrument yourself the warranty is no
longer valid.
7Do not use any accessories that are not intended
for use together with the instrument.
8Disconnect the instrument from the mains before
cleaning. Use a damp cloth for cleaning. Do not
use liquid cleaners or aerosol cleaners.
8B10E ZP-BG02E BG0140ME
2 SAFETY
